2MQTT Zigbee Dongle
Technical Specification
| Wireless Communication Frequency： |
2.4GHz-2.48GHz |
| Supported Protocols： | Thread、Zigbee 3.0、Bluetooth 5.2 LE |
| PORT config： | /dev/ttyUSB0 |
| ESD protection： | Yes |
|
Applicable systems： |
Home Assistant-ZHA、Home
Assistant-Zigbee2Mqtt、OpenHAB |
| Communication Distance： |
200M(Without obstruction) |
|
SoC Amplifier： |
20dBm |
|
Antenna ： |
5dBi high-gain |
| Maximum supported device number： |
32 |
Usage Instructions
- Open the package, connect the antenna to the USB port, and then insert it into a Computer /, Raspberry Pi /HomeAssistant, Gree,n, etc.
- Enter the corresponding system configuration (Home Assistant/OpenHAB) product port (port: /dev/ttyUSB0).
*For detailed configuration procedures, please refer to the guidance documents of the corresponding system.
- After configuration is completed, the device can be connected and used.
Supported protocols
*Of course, you can also extend the network range by using it as a router through flashing the firmware.
FAQs
How do I configure the dongle for use with Home Assistant?
To configure the dongle for use with Home Assistant, follow the steps outlined in the guidance documents provided by Home Assistant.
Can I use the dongle as a router to extend the network range?
Yes, you can extend the network range by using the dongle as a router through re-flashing the firmware.
Documents / Resources
 | 2MQTT Zigbee Dongle |
References
- User Manualmanual.tools
Published: April 8, 2026