Zhongxin-LOGO

Zhongxin K302 Wireless Keyboard and Mouse

Zhongxin-K302-Wireless-Keyboard-and-Mouse-PRODUCT

Product Specification

Zhongxin K302-Wireless-Keyboard-and-Mouse-FIG (1)

Compatible Systems: Windows XP, Windows 7/8/10/11, Mac OS

You will receive

Zhongxin K302-Wireless-Keyboard-and-Mouse-FIG (2)

How to set up

Step 1: Please put the USB receiver into your computer.Zhongxin K302-Wireless-Keyboard-and-Mouse-FIG (3)

Step 2: Put batteries in the keyboard and mouse, then turn on the power switch.Zhongxin K302-Wireless-Keyboard-and-Mouse-FIG (4)

Step 3: The keyboard and mouse will automatically connect to the computer, no driver is needed.

LED Indicator Light

Keyboard

1: Num Lock

The Num Lock indicator will turn green when the Num Lock is activated.

A: Caps Lock

The Caps Lock indicator will turn green when Caps Lock is activated.

Low battery warning

The indicator light will turn red when the battery is almost empty. During charging, the power indicator light remains red, and when fully charged, the red light turns off.Zhongxin K302-Wireless-Keyboard-and-Mouse-FIG (5)

Multimedia button description

Zhongxin K302-Wireless-Keyboard-and-Mouse-FIG (6)

FAQs

  • Q1: The keyboard and mouse can not be connected.
    • A1: Please switch on the keyboard, and press Zhongxin K302-Wireless-Keyboard-and-Mouse-FIG (7)the LED indicator light will flash quickly. Plug the 2.4GHz USB receiver into the computer. Within 10 seconds, put the keyboard at 10 cm near the receiver for pairing. When the light turns off, the keyboard pairing is successful.
  • Q2: What should I do if the keyboard gets delayed or stuck?
    • A2: Please check there is no 2.4GHz device (e.g. router) nearby to interfere with the connection. Please check there is no full metal case that may block the signal.
  • Q3: Where is my USB receiver?
    • A3: The USB receiver is placed on top of the keyboard inside the package, please look for it carefully. Please contact us to get a free replacement if you have lost the USB receiver.

FCC

The multimedia keys are for Win 8 and Win 10, for other systems, there may be no function for some combined keys. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures.

  • Reorient or relocate the receiving antenna.
  • Increase the separation between the equipment and the receiver.
  • Connect the equipment to an outlet on a circuit different from that to which the receiver is connected.
  • Consult the dealer or an experienced radio/TV technician for help Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:

  1. This device may not cause harmful interference
  2. This device must accept any interference received, including interterence that may cause undesired operation.

Radiation Exposure Statement

The device has been evaluated to meet general RF exposure requirements in portable exposure conditions without restriction.

MORE INFO

Documents / Resources

Zhongxin K302 Wireless Keyboard and Mouse [pdf] User Manual
2BAKP-K302, 2BAKPK302, k302, K302 Wireless Keyboard and Mouse, K302, Wireless Keyboard and Mouse, Keyboard and Mouse, Mouse, Keyboard

References

Leave a comment

Your email address will not be published. Required fields are marked *