1. Please enable the “PC Remote” function of the camera first. The specific settings are as follows: Network->Transfer/Remote->PC Remote Function->On; or Network->PC Remote Function->On.
2. When using the electronic focusing function, please set the lens to AF (auto-focusing) mode and the camera body to MF (manual focusing) mode, otherwise the electronic focusing function cannot be used.
3. In video mode, the camera body’s 5-axis anti-shake function will be automatically turned off. To turn it back on, go to Menu->Image Stabilization->Steady Shot->Enhanced/ Standard. When used with a lens that has the anti-shake function, the lens anti-shake function is not affected
4. To use the camera playback function normally, please set the destination for saving static images in the PC remote function to “Computer + Shooting device” or “Only Shooting device”.
5. When using the photo function, to avoid discrepancies in the number of photos taken, please set it as follows: Network->Transfer/Remote->PC Remote Function->Static Image Save Destination->Only Shooting Device.
6. When using HDMI (such as connecting to a monitor), the camera screen display settings are as follows: Go to the camera settings menu->External Output->HDMI Info Display->Off.

1. Please select “PC Remote” for your camera’s “USB Connection”
2. . For Sony cameras, after connecting the gimbal and camera with the control cable, power on the gimbal and then the camera. Make sure the camera is fully charged.
3. When shooting Panorama or Time lapse, it is recommended to turn off the Sony camera’s auto review
4. To trigger electronic focus, please set “Manual Focus (MF)” under “focus mode”.

1. Please select “PC Remote” for your camera’s “USB Connection”.
2. If using electronic focusing, set the “zoom setting” into “on: Digital zoom” in the menu and set the photo format into “JPEG”.
3. For Sony cameras, after connecting the gimbal and camera with the control cable, power on the gimbal and then the camera. Make sure the camera is fully charged. Optical zoom control is available on the gimbal when used with a motorized lens. Digital zoom control is available on the gimbal when used with a non- motorized lens. Please select the zoom option in your camera’s settings.
4. When shooting Panorama or Time lapse, it is recommended to turn off the Sony camera’s auto review.

Mode

1. Please enable the “PC Remote” function of the camera first. The specific settings are as follows: Network->Transfer/Remote->PC Remote Function->On; or Network->PC Remote Function->On.
2. When using the electronic focusing function, please set the lens to AF (auto-focusing) mode and the camera body to MF (manual focusing) mode, otherwise the electronic focusing function cannot be used.
3. In video mode, the camera body’s 5-axis anti-shake function will be automatically turned off. To turn it back on, go to Menu->Image Stabilization->Steady Shot->Enhanced/Standard. When used with a lens that has the anti-shake function, the lens anti-shake function is not affected.
4. To use the camera playback function normally, please set the destination for saving static images in the PC remote function to “Computer + Shooting device” or “Only Shooting device”.
5. When using the photo function, to avoid discrepancies in the number of photos taken, please set it as follows: Network->Transfer/Remote->PC Remote Function->Static Image Save Destination->Only Shooting Device.
6. When using HDMI (such as connecting to a monitor), the camera screen display settings are as follows: Go to the camera settings menu->External Output->HDMI Info Display->Off.

1. Please select “PC Remote” for your camera’s “USB Connection”.
2. If using electronic focusing, set the “zoom setting” into “on: Digital zoom” in the menu and set the photo format into “JPEG”.
3. For Sony cameras, after connecting the gimbal and camera with the control cable, power on the gimbal and then the camera. Make sure the camera is fully charged. Optical zoom control is available on the gimbal when used with a motorized lens. Digital zoom control is available on the gimbal when used with a non-motorized lens. Please select the zoom option in your camera’s settings.
4. When shooting Panorama or Time lapse, it is recommended to turn off the Sony camera’s auto review.

1. Please enable the “PC Remote” function of the camera first. The specific settings are as follows: Network->Transfer/Remote->PC Remote Function->On; or Network->PC Remote Function->On.
2. When using the electronic focusing function, please set the lens to AF (auto-focusing) mode and the camera body to MF (manual focusing) mode, otherwise the electronic focusing function cannot be used.
3. In video mode, the camera body’s 5-axis anti-shake function will be automatically turned off. To turn it back on, go to Menu->Image Stabilization->Steady Shot->Enhanced/Standard. When used with a lens that has the anti-shake function, the lens anti-shake function is not affected.
4. To use the camera playback function normally, please set the destination for saving static images in the PC remote function to “Computer + Shooting device” or “Only Shooting device”.
5. When using the photo function, to avoid discrepancies in the number of photos taken, please set it as follows: Network->Transfer/Remote->PC Remote Function->Static Image Save Destination->Only Shooting Device.
6. When using HDMI (such as connecting to a monitor), the camera screen display settings are as follows: Go to the camera settings menu->External Output->HDMI Info Display->Off.

1. Please select “PC Remote” for your camera’s “USB Connection”.
2. If using electronic focusing, set the “zoom setting” into “on: Digital zoom” in the menu and set the photo format into “JPEG”.
3. For Sony cameras, after connecting the gimbal and camera with the control cable, power on the gimbal and then the camera. Make sure the camera is fully charged. Optical zoom control is available on the gimbal when used with a motorized lens. Digital zoom control is available on the gimbal when used with a non-motorized lens. Please select the zoom option in your camera’s settings.
4. When shooting Panorama or Time lapse, it is recommended to turn off the Sony camera’s auto review.

1. Please enable the “PC Remote” function of the camera first. The specific settings are as follows: Network->Transfer/Remote->PC Remote Function->On; or Network->PC Remote Function->On.
2.  When using the electronic focusing function, please set the lens to AF (auto-focusing) mode and the camera body to MF (manual focusing) mode, otherwise the electronic focusing function cannot be used.
3. In video mode, the camera body’s 5-axis anti-shake function will be automatically turned off. To turn it back on, go to Menu->Image Stabilization->Steady Shot->Enhanced/Standard. When used with a lens that has the anti-shake function, the lens anti-shake function is not affected.
4. To use the camera playback function normally, please set the destination for saving static images in the PC remote function to “Computer + Shooting device” or “Only Shooting device”.
5. When using the photo function, to avoid discrepancies in the number of photos taken, please set it as follows: Network->Transfer/Remote->PC Remote Function->Static Image Save Destination->Only Shooting Device.6. When using HDMI (such as connecting to a monitor), the camera screen display settings are as follows: Go to the camera settings menu->External Output->HDMI Info Display->Off.

1. Please select “PC Remote” for your camera’s “USB Connection”.
2.  If using electronic focusing, set the “zoom setting” into “on: Digital zoom” in the menu and set the photo format into “JPEG”.
3. For Sony cameras, after connecting the gimbal and camera with the control cable, power on the gimbal and then the camera. Make sure the camera is fully charged. Optical zoom control is available on the gimbal when used with a motorized lens. Digital zoom control is available on the gimbal when used with a non-motorized lens. Please select the zoom option in your camera’s settings.
4. When shooting Panorama or Time lapse, it is recommended to turn off the Sony camera’s auto review.

1. Please enable the “PC Remote” function of the camera first. The specific settings are as follows: Network->Transfer/Remote->PC Remote Function->On; or Network->PC Remote Function->On.
2. When using the electronic focusing function, please set the lens to AF (auto-focusing) mode and the camera body to MF (manual focusing) mode, otherwise the electronic focusing function cannot be used.
3. In video mode, the camera body’s 5-axis anti-shake function will be automatically turned off. To turn it back on, go to Menu->Image Stabilization->Steady Shot->Enhanced/Standard. When used with a lens that has the anti-shake function, the lens anti-shake function is not affected.
4. To use the camera playback function normally, please set the destination for saving static images in the PC remote function to “Computer + Shooting device” or “Only Shooting device”.
5. When using the photo function, to avoid discrepancies in the number of photos taken, please set it as follows: Network->Transfer/Remote->PC Remote Function->Static Image Save Destination->Only Shooting Device.
6. When using HDMI (such as connecting to a monitor), the camera screen display settings are as follows: Go to the camera settings menu->External Output->HDMI Info Display->Off.

1. Please select “PC Remote” for your camera’s “USB Connection”.
2. If using electronic focusing, set the “zoom setting” into “on: Digital zoom” in the menu and set the photo format into “JPEG”.
3. For Sony cameras, after connecting the gimbal and camera with the control cable, power on the gimbal and then the camera. Make sure the camera is fully charged. Optical zoom control is available on the gimbal when used with a motorized lens. Digital zoom control is available on the gimbal when used with a non-motorized lens. Please select the zoom option in your camera’s settings.
4. When shooting Panorama or Time lapse, it is recommended to turn off the Sony camera’s auto review.

1. Please enable the “PC Remote” function of the camera first. The specific settings are as follows: Network->Transfer/Remote->PC Remote Function->On; or Network->PC Remote Function->On.
2. When using the electronic focusing function, please set the lens to AF (auto-focusing) mode and the camera body to MF (manual focusing) mode, otherwise the electronic focusing function cannot be used.
3. In video mode, the camera body’s 5-axis anti-shake function will be automatically turned off. To turn it back on, go to Menu->Image Stabilization->Steady Shot->Enhanced/Standard. When used with a lens that has the anti-shake function, the lens anti-shake function is not affected.
4. To use the camera playback function normally, please set the destination for saving static images in the PC remote function to “Computer + Shooting device” or “Only Shooting device”.
5. When using the photo function, to avoid discrepancies in the number of photos taken, please set it as follows: Network >Transfer/Remote->PC Remote Function->Static Image Save Destination->Only Shooting Device.
6. When using HDMI (such as connecting to a monitor), the camera screen display settings are as follows: Go to the camera settings menu->External Output->HDMI Info Display->Off.

1. Please select “PC Remote” for your camera’s “USB Connection”.
2. If using electronic focusing, set the “zoom setting” into “on: Digital zoom” in the menu and set the photo format into “JPEG”.
3. For Sony cameras, after connecting the gimbal and camera with the control cable, power on the gimbal and then the camera. Make sure the camera is fully charged. Optical zoom control is available on the gimbal when used with a motorized lens. Digital zoom control is available on the gimbal when used with a non-motorized lens. Please select the zoom option in your camera’s settings.
4. When shooting Panorama or Time lapse, it is recommended to turn off the Sony camera’s auto review.

1. Please enable the “PC Remote” function of the camera first. The specific settings are as follows: Network->Transfer/Remote->PC Remote Function->On; or Network->PC Remote Function->On.
2. When using the electronic focusing function, please set the lens to AF (auto-focusing) mode and the camera body to MF (manual focusing) mode, otherwise the electronic focusing function cannot be used.
3. In video mode, the camera body’s 5-axis anti-shake function will be automatically turned off. To turn it back on, go to Menu->Image Stabilization->Steady Shot->Enhanced/Standard. When used with a lens that has the anti-shake function, the lens anti-shake function is not affected.
4. To use the camera playback function normally, please set the destination for saving static images in the PC remote function to “Computer + Shooting device” or “Only Shooting device”.
5. When using the photo function, to avoid discrepancies in the number of photos taken, please set it as follows: Network->Transfer/Remote->PC Remote Function->Static Image Save Destination->Only Shooting Device.
6. When using HDMI (such as connecting to a monitor), the camera screen display settings are as follows: Go to the camera settings menu->External Output->HDMI Info Display->Off.

1. Please select “PC Remote” for your camera’s “USB Connection”.
2. If using electronic focusing, set the “zoom setting” into “on: Digital zoom” in the menu and set the photo format into “JPEG”.
3. For Sony cameras, after connecting the gimbal and camera with the control cable, power on the gimbal and then the camera. Make sure the camera is fully charged. Optical zoom control is available on the gimbal when used with a motorized lens. Digital zoom control is available on the gimbal when used with a non-motorized lens. Please select the zoom option in your camera’s settings.
4. When shooting Panorama or Time lapse, it is recommended to turn off the Sony camera’s auto review.

1. Please enable the “PC Remote” function of the camera first. The specific settings are as follows: Network->Transfer/Remote->PC Remote Function->On; or Network->PC Remote Function->On.
2. When using the electronic focusing function, please set the lens to AF (auto-focusing) mode and the camera body to MF (manual focusing) mode, otherwise the electronic focusing function cannot be used.
3. In video mode, the camera body’s 5-axis anti-shake function will be automatically turned off. To turn it back on, go to Menu->Image Stabilization->Steady Shot->Enhanced/Standard. When used with a lens that has the anti-shake function, the lens anti-shake function is not affected.
4. To use the camera playback function normally, please set the destination for saving static images in the PC remote function to “Computer + Shooting device” or “Only Shooting device”.
5. When using the photo function, to avoid discrepancies in the number of photos taken, please set it as follows: Network->Transfer/Remote->PC Remote Function->Static Image Save Destination->Only Shooting Device.
6. When using HDMI (such as connecting to a monitor), the camera screen display settings are as follows: Go to the camera settings menu->External Output->HDMI Info Display->Off.

1. Please select “PC Remote” for your camera’s “USB Connection”.
2.  If using electronic focusing, set the “zoom setting” into “on: Digital zoom” in the menu and set the photo format into “JPEG”.
3. For Sony cameras, after connecting the gimbal and camera with the control cable, power on the gimbal and then the camera. Make sure the camera is fully charged. Optical zoom control is available on the gimbal when used with a motorized lens. Digital zoom control is available on the gimbal when used with a non-motorized lens. Please select the zoom option in your camera’s settings.
4. When shooting Panorama or Time lapse, it is recommended to turn off the Sony camera’s auto review.

Sony α7M2

1. Please enable the “PC Remote” function of the camera first. The specific settings are as follows: Network->Transfer/Remote->PC Remote Function->On; or Network->PC Remote Function->On.
2. When using the electronic focusing function, please set the lens to AF (auto-focusing) mode and the camera body to MF (manual focusing) mode, otherwise the electronic focusing function cannot be used.
3. In video mode, the camera body’s 5-axis anti-shake function will be automatically turned off. To turn it back on, go to Menu->Image Stabilization->Steady Shot->Enhanced/Standard. When used with a lens that has the anti-shake function, the lens anti-shake function is not affected.
4. To use the camera playback function normally, please set the destination for saving static images in the PC remote function to “Computer + Shooting device” or “Only Shooting device”.
5. When using the photo function, to avoid discrepancies in the number of photos taken, please set it as follows: Network->Transfer/Remote->PC Remote Function->Static Image Save Destination->Only Shooting Device.
6. When using HDMI (such as connecting to a monitor), the camera screen display settings are as follows: Go to the camera settings menu->External Output->HDMI Info Display->Off.

1. Please select “PC Remote” for your camera’s “USB Connection”.
2.  If using electronic focusing, set the “zoom setting” into “on: Digital zoom” in the menu and set the photo format into “JPEG”.
3. For Sony cameras, after connecting the gimbal and camera with the control cable, power on the gimbal and then the camera. Make sure the camera is fully charged. Optical zoom control is available on the gimbal when used with a motorized lens. Digital zoom control is available on the gimbal when used with a non-motorized lens. Please select the zoom option in your camera’s settings.
4. When shooting Panorama or Time lapse, it is recommended to turn off the Sony camera’s auto review.

1. Please select “PC Remote” for your camera’s “USB Connection”.
2. . If using electronic focusing, set the “zoom setting” into “on: Digital zoom” in the menu and set the photo format into “JPEG”.
3. For Sony cameras, after connecting the gimbal and camera with the control cable, power on the gimbal and then the camera. Make sure the camera is fully charged. Optical zoom control is available on the gimbal when used with a motorized lens. Digital zoom control is available on the gimbal when used with a non-motorized lens. Please select the zoom option in your camera’s settings.
4. When shooting Panorama or Time lapse, it is recommended to turn off the Sony camera’s auto review.

1. Please enable the “PC Remote” function of the camera first. The specific settings are as follows: Network->Transfer/Remote->PC Remote Function->On; or Network->PC Remote Function->On.
2.  When using the electronic focusing function, please set the lens to AF (auto-focusing) mode and the camera body to MF (manual focusing) mode, otherwise the electronic focusing function cannot be used.
3. In video mode, the camera body’s 5-axis anti-shake function will be automatically turned off. To turn it back on, go to Menu->Image Stabilization->Steady Shot->Enhanced/Standard. When used with a lens that has the anti-shake function, the lens anti-shake function is not affected.
4. To use the camera playback function normally, please set the destination for saving static images in the PC remote function to “Computer + Shooting device” or “Only Shooting device”.
5. When using the photo function, to avoid discrepancies in the number of photos taken, please set it as follows: Network->Transfer/Remote->PC Remote Function->Static Image Save Destination->Only Shooting Device.
6. When using HDMI (such as connecting to a monitor), the camera screen display settings are as follows: Go to the camera settings menu->External Output->HDMI Info Display->Off.

1. Please select “PC Remote” for your camera’s “USB Connection”.
2. . For Sony cameras, after connecting the gimbal and camera with the control cable, power on the gimbal and then the camera. Make sure the camera is fully charged.
3. When shooting Panorama or Time lapse, it is recommended to turn off the Sony camera’s auto review.
4. To trigger electronic focus, please set “Manual Focus (MF)” under “focus mode”.

1. Please enable the “PC Remote” function of the camera first. The specific settings are as follows: Network->Transfer/Remote->PC Remote Function->On; or Network->PC Remote Function->On.
2. When using the electronic focusing function, please set the lens to AF (auto-focusing) mode and the camera body to MF (manual focusing) mode, otherwise the electronic focusing function cannot be used.
3. In video mode, the camera body’s 5-axis anti-shake function will be automatically turned off. To turn it back on, go to Menu->Image Stabilization->Steady Shot->Enhanced/Standard. When used with a lens that has the anti-shake function, the lens anti-shake function is not affected.
4. To use the camera playback function normally, please set the destination for saving static images in the PC remote function to “Computer + Shooting device” or “Only Shooting device”.
5. When using the photo function, to avoid discrepancies in the number of photos taken, please set it as follows: Network->Transfer/Remote->PC Remote Function->Static Image Save Destination->Only Shooting Device.
6. When using HDMI (such as connecting to a monitor), the camera screen display settings are as follows: Go to the camera settings menu->External Output->HDMI Info Display->Off.

1. Please select “PC (Tether)” for your camera’s “USB Connection”.
2. When using electronic focusing, the camera lens should be in “MF” mode.
3. Before connecting with a control cable, please first turn off the USB Power Supply in camera settings.
4. When shooting Panorama or Time lapse, it is recommended to turn off auto review and duration time(photo) in the Panasonic camera.

1. Please select “PC (Tether)” for your camera’s “USB Connection”.
2. When using electronic focusing, the camera lens should be in “MF” mode.
3. Before connecting with a control cable, please first turn off the USB Power Supply in camera settings
4. When shooting Panorama or Time lapse, it is recommended to turn off auto review and duration time(photo) in the Panasonic camera.

1. Please set the “connection mode” into “USB TETHER shooting auto” for camera connection settings.

1. Please apply electronic follow focus function in AF mode of the lens and live view mode of the camera.
2. If using electronic focusing when recording a video, please “Disable” the ” Movie Servo AF “.
3. The Canon DSLR cannot realize the halfway press shutter button to autofocus in Live Preview. If the feature is used, the camera Live Preview mode should be turned off.
4. When shooting Panorama or Time lapse, it is recommended to turn off image confirmation in the Canon camera.

1. Please apply electronic follow focus function in AF mode of the lens and live view mode of the camera.
2. If using electronic focusing when recording a video, please “Disable” the ” Movie Servo AF “.
3. The Canon DSLR cannot realize the halfway press shutter button to autofocus in Live Preview. If the feature is used, the camera Live Preview mode should be turned off.
4. When shooting Panorama or Time lapse, it is recommended to turn off image confirmation in the Canon camera.

1. Please apply electronic follow focus function in AF mode.
2. If using electronic focusing when recording a video, please “Disable” the ” Movie Servo AF “.
3. When shooting Panorama or Time lapse, it is recommended to turn off image confirmation in the Canon camera.

1. Please apply electronic follow focus function in AF mode of the lens and live view mode of the camera.
2. If using electronic focusing when recording a video, please “Disable” the ” Movie Servo AF “.
3. The Canon DSLR cannot realize the halfway press shutter button to autofocus in Live Preview. If the feature is used, the camera Live Preview mode should be turned off.
4. When shooting Panorama or Time lapse, it is recommended to turn off image confirmation in the Canon camera.

1.  Please apply electronic follow focus function in AF mode.
2.  If using electronic focusing when recording a video, please “Disable” the ” Movie Servo AF “.
3. When shooting Panorama or Timelapse, it is recommended to turn off image confirmation in the Canon camera.

1. When using electronic focusing, the camera lens should be in A(AF) mode and select AF-S or AF-C in focusing mode.
2. Nikon cameras don’t support electronic focusing when recording.
3. When shooting Panorama or Time lapse, it is recommended to turn off image review in the Nikon camera to reduce system latency.

1.  After connecting the cameras to the gimbal, there will be a prompt on the camera screen for you to choose USB mode. Please choose[  ] (PC control) and turn the camera mode dial to P, A, S, or M mode.

1. Please set the “connection mode” into “USB TETHER shooting auto” for camera connection settings.
2.   In Photo mode of Fujifilm, when the camera is connected to the gimbal, the camera parameter control from camera is disabled and you can only adjust camera parameters via gimbal. Restart the camera to resume parameter control from camera. Plug in and out the camera control cable to return to gimbal control; Fujifilm doesn’t support saving photos in RAW format.

1. Please set the “connection mode” into “USB TETHER shooting auto” for camera connection settings.
2. In Photo mode of Fujifilm, when the camera is connected to the gimbal, the camera parameter control from camera is disabled and you can only adjust camera parameters via gimbal. Restart the camera to resume parameter control from camera. Plug in and out the camera control cable to return to gimbal control; Fujifilm doesn’t support saving photos in RAW format.

1.  Set the camera’s “USB Connect” into “serial”.

1. Bluetooth shutter control and pairing methods:
   1. Turn on the camera’s Bluetooth: go to the camera settings menu, select Network → Bluetooth Settings → Bluetooth Function → On;
   2. Bluetooth pairing/connection: Network → Bluetooth Settings → Pairing;
   3. Click the menu button, Bluetooth Shutter → Select the corresponding camera Bluetooth name and click Connect;
   4. Turn on Bluetooth remote control: Network → Bluetooth Remote Control → On.
2. Due to the limitation of the camera system, the camera control is not available if the Bluetooth is only connected but not for remote control. Therefore the remote control should also be enabled.
3. When the camera and WEEBILL 3E are both in Bluetooth shutter and wired control mode at the same time, wired control takes priority and there is no need to actively disconnect Bluetooth.

1. Bluetooth shutter control and pairing methods:
   1.  Wireless function → Bluetooth settings → Bluetooth → Enable
   2. Wireless function → Wi-Fi/Bluetooth connection→ Connect to wireless remote control (If the camera prompts that the device is not found during the first-time connection, perform pairing again to complete Bluetooth pairing)
   3. Photo shooting setting: Drive mode → Self- timer: Remote control (10s, 2s are both acceptable, but it must be remote control)
   4. Power off setting: Settings → Power saving→ Auto power off → Off
   5. Video recording setting: Switch the camera to video recording mode → Shooting and recording → Remote control → Enable2. When the camera and WEEBILL 3E are both in Bluetooth shutter and wired control mode at the same time, wired control takes priority and there is no need to actively disconnect Bluetooth.

1. Bluetooth shutter settings and pairing method:
   1.  Enter the setting menu of the camera → Wireless remote control (ML-L7) → Save wireless remote control
   2. In the gimbal settings, select Bluetooth shutter→ Select the corresponding camera Bluetooth name and connect;
2. When the camera and the gimbal are in both Bluetooth shutter and wired control states, priority is given to the wired control function, and there is no need to actively disconnect Bluetooth;
3. Due to Bluetooth protocol issues, reconnection is currently not supported for Bluetooth.