WLAN Pi Go 树莓派计算模块
“
OSCIUM Wi-Spy Lucid
规格：
- Accessory Port: Wi-Spy Lucid (Optional)
- Utilization: Packet Capture, Passive Scan, Spectrum Analysis,
Device Profiling - Compliance: FCC ID: 2BNM5-BE200NG, CE/UKCA/FCC Part 15
合规 - Made in: Taiwan
产品使用说明：
基本设置：
- Plug the WLAN Pi Go into the host device.
- Install the appropriate application on the host device:
- a) WLAN Pi App on iOS/Android
- b) WiFi Explorer Pi / Airtool Pi on iOS
- c) WiFi Explorer Pro 3 / Airtool 2 on Mac
- d) MetaGeek App on PC
常问问题：
Q: What can I use the OSCIUM Wi-Spy Lucid for?
A: The Wi-Spy Lucid can be utilized for packet capture, passive
scan, spectrum analysis, and device profiling.
Q: Where is the OSCIUM Wi-Spy Lucid manufactured?
A: The OSCIUM Wi-Spy Lucid is made in Taiwan.
Q: What are the compliance standards for the OSCIUM Wi-Spy
Lucid?
A: The OSCIUM Wi-Spy Lucid is FCC ID: 2BNM5-BE200NG, CE/UKCA/FCC
Part 15 compliant.
问：我在哪里可以找到更多信息和支持
产品？
A: For more info and support, visit wlanpi.com/support.
“`
Go
OSCIUM Wi-Spy Lucid (OPTIONAL) ACCESSORY PORT
STATUS LED DATA PORT
CONNECT TO HOST
Utilize for:
数据包捕获
Passive Scan
频谱分析
Device Profiling
基本设置：
1). Plug WLAN Pi Go into host device 2). Install Application on host device
a) WLAN Pi App on iOS/Android b) WiFi Explorer Pi / Airtool Pi on iOS c) WiFi Explorer Pro 3 / Airtool 2 on Mac d) MetaGeek App on PC
FCC ID: 2BNM5-BE200NG CE / UKCA / FCC Part 15 compliant. Meets SAR exemptions per FCC 447498 D01. More info: wlanpi.com/support
台湾制造
文件/资源
 |
OSCIUM WLAN Pi Go Raspberry Compute Module [pdf] 指示 WLAN Pi Go Raspberry Compute Module, Raspberry Compute Module, Compute Module, Module |