BD102 Solar Wireless Backup Camera System
“
Specifications:
- Model: BD102
- Monitor Size: 10 inches
- Power Source: Solar, USB-C charging
- Number of Backup Cameras: 2
Product Usage Instructions:
Before Using:
To ensure a smooth experience, verify that all items listed in
your order are included and undamaged. Contact customer service at
sales@uszeroxclub.com if anything is missing or defective. Include
your Amazon order number and attach photos for quick
assistance.
Charging the Battery:
The camera supports USB-C charging and solar charging. It is
recommended to primarily use the Type-C cable for efficient
charging. The solar panel provides supplementary power but is best
used as a backup to regular charging.
What’s in the Box:
- 10-inch Monitor
- Backup Camera x2
- 12V Car Charger
- Suction Cup Mount
- Installation Tools
- USB Wall Charger x2
- USB Power Cable for Monitor
- U-Shaped Bracket
- Antenna x4
- USB-C Cable x2
About the Camera:
- Power On/Off Instructions:
Quick press the power button to turn on the camera. Hold the button
for 7-10 seconds to turn it off manually. For convenience, use the
auto power option by cutting power to the monitor using the car
charger switch. - Camera Indicator Light:
The red light indicates charging and the blue light shows battery
level. Different blue light patterns indicate battery levels.
Ensure to charge when low battery warning blinks. - Two Charging Methods:
The camera supports USB-C charging and solar charging. USB-C
charging is recommended for reliable charging, while solar charging
assists in maintaining battery levels. - Solar Panel Charging Information:
The solar panel provides supplementary power. It is best used
alongside USB-C charging for optimal performance.
Installation:
- Installation of the Antenna:
– Mount the antenna to the monitor
– Mount the antenna to the camera
FAQ:
Q: What should I do if the camera battery is low?
A: Charge the camera using either the USB-C cable or ensure it
gets sufficient sunlight for solar charging.
Q: How do I turn off the camera?
A: Quick press the power button to turn it off manually or use
the auto power option with the car charger switch to cut power to
the monitor.
“`
ZEROXCLUB Instructions Manual
Solar Wireless Backup Camera System Model: BD102
Any questions or suggestions please send an email to customer service via sales@uszeroxclub.com
ZEROXCLUB Instructions Manual
TABLE OF CONTENTS
TABLE OF CONTENTS ……………………………………………………………………………………………………1 WARRANTY ……………………………………………………………………………………………………………………..2 BEFORE USING ……………………………………………………………………………………………………………… 2 CHARGE THE BATTERY ……………………………………………………………………………………………….. 3 WHAT IS IN THE BOX ……………………………………………………………………………………………………..4 ABOUT CAMERA ……………………………………………………………………………………………………………. 4 INSTALLATION ……………………………………………………………………………………………………………….. 7
Installation of the Antenna ……………………………………………………………………………………………. 7 Installation of the Camera ……………………………………………………………………………………………..7 Installation of the Monitor ………………………………………………………………………………………………7 OPERATING INSTRUCTION ………………………………………………………………………………………….. 9 Monitor Buttons ……………………………………………………………………………………………………………. 9 Main Screen Interface ………………………………………………………………………………………………… 10 Settings Operation ……………………………………………………………………………………………………… 11
Menu ………………………………………………………………………………………………………………………. 11 PAIRING Operation ………………………………………………………………………………………………… 11 PICTURE Operation ……………………………………………………………………………………………….. 13 SYSTEM Operation ………………………………………………………………………………………………… 14 PLAY Operation ……………………………………………………………………………………………………… 14 RECORD Operation ……………………………………………………………………………………………….. 15 TROUBLESHOOTING …………………………………………………………………………………………………… 15 FAQS ………………………………………………………………………………………………………………………………18 SAFETY INFORMATION ………………………………………………………………………………………………..20 SPECIFICATIONS …………………………………………………………………………………………………………. 21
ZEROXCLUB Instructions Manual
WARRANTY
Thank you for choosing ZEROXCLUB! We stand behind our products with an 18-month free warranty and lifetime technical support–ensuring your backup camera performs flawlessly for years to come. If you encounter any issues, need troubleshooting assistance, or simply have questions, our dedicated support team is here to help. Every message receives a reply within 24 hours, and we’ll do everything possible to resolve your concern to your satisfaction. For warranty claims, replacements, or technical support, please contact us immediately at: Email: sales@uszeroxclub.com Save this address for quick access–we’re always ready to assist!
BEFORE USING
To ensure a smooth experience, please verify that all items listed in your order are included and undamaged. If anything is missing or defective, contact us immediately at sales@uszeroxclub.com for fast assistance. For the quickest resolution: Include your Amazon order number Attach photos of the damaged/missing item(s) This helps us resolve your issue efficiently. We appreciate your patience and cooperation!
2
ZEROXCLUB Instructions Manual
CHARGE THE BATTERY
Fully Charge the battery before use via the supplied USB cable. 1. Connect the supplied USB-C cable to the Type-C port of the camera. 2. Plug the USB-C cable into the USB wall charger and Plug your charger into an outlet. The red indicator light will be on when your camera is charging. 3. It takes about 6 hours to charge. When battery is fully charged, the red indicator light will turn off. If the battery is drained before charging, the charging time needs to be extended. 4. Close Type-C door securely to ensure waterproof integrity. NOTICE Turn the camera off for charging. Otherwise the camera will consume power while charging. NOTICE The Type-C Charging port is not waterproof, please cover it back after charging. Otherwise the camera may not work if it gets water in it.
3
ZEROXCLUB Instructions Manual
WHAT IS IN THE BOX
10-inch Monitor
Backup Camera*2
12V Car Charge
Suction Cup Mount
Installation Tools
USB Wall Charger*2
USB power cable for Monitor
U-Shaped Bracket
ABOUT CAMERA
Antenna*4
USB-C Cable*2
4
ZEROXCLUB Instructions Manual
1. Power On/Off Instructions: Quick press the power button to turn on the camera. Hold the button (7-10 seconds) to turn it off manually.
Auto Power Option (Recommended for Convenience): Turn on the camera first. Use the car charger switch to cut power to the monitor. The camera will auto-off in ~1 minute. It will auto-on in ~1 minute when power is restored. *This automatic feature eliminates manual operation for daily use.
2. Camera Indicator Light
The red light is the charging indicator, it will light up when the
camera is charging, it will turn off when charging is finished or
uncharged. The blue light indicates the battery level. The blue light
will illuminate when the camera is turned on.
Steady on
Turn on / Battery about 67% to 100% full
Steady on
Turn on / Battery about 34% to 66% full
Steady on
Turn on / Battery about 1% to 33% full
Blinks blue Low battery. Charge as soon as possible.
Steady on
No Lights On
The camera is turned off and charging. When charging is finished, the red lamp turns off. Turn off / Camera is off and fully charged / Battery is drained
3. Two Charging Methods The camera supports USB-C charging (5V DC charging) and Solar charging. Due to the inefficiency of solar charging caused by the limitation of solar panel area, it is best to use Type-C charging as the primary charging method. Note that charging times increase at low or
high temperatures.
4. Solar Panel Charging Information
5
ZEROXCLUB Instructions Manual
The included solar panel supplementary power. However, due to its compact size, it cannot fully recharge the battery on its own– especially with continuous use. For optimal performance: Primary Charging: Use the included Type-C cable for full, reliable charging Solar Assistance: The panel helps maintain battery levels when sunlight is available Tip: For best results, use solar charging as a backup to your regular Type-C charging routine.
NOTICE
1. Power Management · Power off the camera when not in use (e.g., overnight) to conserve energy. · Always fully charge the battery via the included USB-C cable before first use. 2. Charging Recommendations · Primary Charging: Regularly recharge via USB-C (especially in winter) · Low Battery Alert: Charge immediately when the battery indicator drops below 20%. · Storage: Recharge every 60 days if unused; charge fully 1-2 days before planned use. 3. Solar Panel Usage · Extends operational time but cannot fully replace wired charging. · For best results, ensure direct sunlight exposure (angled at 30°-45°). 4. Vehicle Power Safety · If hardwired to a constant 12V outlet, unplug the monitor when parked to prevent vehicle battery drain. · When using portable power: Minimum 9,600mAh capacity required Use only 5V/2A output ports 5. Installation Tips · Signal Test: Temporarily mount both units and test reception in multiple locations before final placement. · Optimal Positioning: Camera: Mount 20″ above ground to reduce debris interference Monitor: Avoid metallic obstructions between components
6
ZEROXCLUB Instructions Manual
* Extreme temperatures may reduce battery efficiency. For winter use, keep the camera charged above 50%.
INSTALLATION
Installation of the Antenna
Mount the antenna to monitor
Mount the antenna to camera
Installation of the Camera
The camera has a strong magnetic base that easily adheres to metal surfaces. You just attach it where you want and then adjust the camera angle as needed.
NOTICE
a. Aluminum and fiberglass magnets vehicle body is weakly attracted to a magnetic base. We recommend that you can purchase a metal plate and bolts from the local hardware store. After cutting it down to size and used the bolts that you through-bolted to the vehicle.
b. Take the camera off when not in use and put it in a safe place to prevent it from being stolen.
Installation of the Monitor
7
ZEROXCLUB Instructions Manual
U-shaped Bracket Installation
Align the bracket with Screw the knob bolts, After adjusting the
the holes on either side and adjust the angle of screen angle, tighten the
of the screen.
the stand to the screen. screws to secure it.
Suction Cup Bracket Installation
8
ZEROXCLUB Instructions Manual
1. Clean and dry the mounting surface where the monitor can be easily seen inside the car, and does not obstruct your vision when driving. 2. Remove the plastic sheet of the suction cup, press it against the mounting surface and push the suction cup lock lever down to lock the suction cup. 3. Slide the monitor into the bracket. The angle of the monitor can be adjusted by loosening or tightening the rotary knob. 4. Plug the monitor into the cigarette lighter to power for the monitor.
You can also use the DC power pigtail cable to power your monitor. (1)Connect Red wire to ACC power(which is the gear switch before starting up the car’s motor).Vehicle turns on, monitor turns on automatically,Vehicle turns off, monitor will turn off. (2)Connect Black wire to Negative Power/Ground/Sheet Metal. NOTICE Do not allow water to enter the LCD Display.
OPERATING INSTRUCTION
Monitor Buttons
9
ZEROXCLUB Instructions Manual
Putting the monitor on standby and waking it up
Decrease/Brightness Adjustment/Flip Image button: Select forward in menu operation. In a non-menu panel, press to reduce brightness or press and hold for 5S to rotate.
Menu/Return button: Press to access menu or return to the previous panel.
Increase/Brightness Adjustment button: Select backward in menu operation. In a non-menu panel, press to increase brightness.
Confirm/Recording Button: Confirm in menu operation, press it to activate the selected icon. Press to start/stop recording.
Channel Switch/Confirm button: Press to switch camera channel.
Parking Guidelines button: Turn on/off the parking guidelines.
Note: In split screen, the menu cannot be accessed, please press CH to switch to single screen first.
Note: The MENU button cannot be operated to access the menu panel if the system is recording. Please press OK first to stop recording.
Note: If everything is backwards, press and hold the can rotate the screen.
button a few seconds
Main Screen Interface
(1)
Signal: It means the strength of the signal between the camera and
the monitor.
(2)
CAM #1/2: The channel number is shown on the top left of the
screen. Press the CH button to switch the camera channel.
(3)
Battery: This sign represents the remaining battery power of the
camera. You can check the battery level in the display.
(4)
Rewrite: When this sign is displayed on the screen, it means the
rewrite function is turned on. And it will automatically overwrite the previous
videos when the memory card is full. (You could turn on/off it via MENU RECORD ON/OFF.)
(5)
Memory card: This sign is displayed in the top right of the screen
10
ZEROXCLUB Instructions Manual
to indicate that an memory card is inserted. If the system does not recognize the memory card, try reinserting or formatting it.
(6)
REC: The
will shown in red in the top center of the screen while
recording video. If there is a problem with the recording, please try to format
the memory card. Press OK button to start/stop recording.
(7)
Unpaired: If this sign is displayed in the upper left of the screen,
this channel is not yet paired with the camera.
(8) Camera Charging Indicator
(9)
Battery exhausted: Turn camera off and recharge battery.
Settings Operation
Menu
There are eight primary menu selections. Selected menu items are highlighted
in yellow. Settings for Pairing/Picture/Mir-flip/ System/ Play/ Record. Use the Function Increase button or Function Decrease button to select the menu item. Sub-menu items may be highlighted in red.
NOTICE Pressing the M button won’t bring up the main menu when in
split-screen mode or recording mode. To return from any selection, press the M button or wait for a timeout.
PAIRING Operation
11
ZEROXCLUB Instructions Manual
Special Notice
a. The cameras have been paired in the factory for QC testing. If it does not paired, manually re-pair the camera. b. Fully charge the camera with a Type-C cable before first use. Turn off the camera power before charging,otherwise the camera will consume power while charging. Turn off camera when not in use to hold battery charge. c. Press the power button once to turn on the camera; Press and hold the power button to completely turn off the camera. d. This is easiest done with the camera and monitor close to each other, as you have a limited time to pair the screen and camera together. (within 3 feet) e. Ensure that the antennas have been installed for both the monitor and the camera f. Turn off all cameras before pairing and make sure they are charged with at least 1 bar. Only power up one camera when pairing and pair it at a time. g. Fully charge the camera with a Type-C cable before first use.
Single Camera Pairing Steps 1) Turn off the camera first. 2) Press CH button to select a full channel that needs to be paired. (The channel must be a blue screen with no signal, and only one
channel is currently displayed, which is full screen.)
3) Press M to enter menu interface and select PARIING, press OK to confirm, you will have 30 seconds for pairing. 4) Turn on the camera during the pairing countdown.Only power up
one camera and pair it at a time.
5) The live view will be displayed after pairing complete.
Two Cameras Pairing Steps 1) Turn off all cameras and make sure they are charged with at least 1 bar 2) Switch to the first full screen and start the pairing function: Menu
PAIRING30S countdown
3) Turn on ONE camera on DURING the pairing countdown
12
ZEROXCLUB Instructions Manual
4) Switch to the second full screen and start the pairing function again for a 2nd time 5) Turn on the 2ND camera DURING the pairing countdown
NOTICE
a. If no picture displayed after pairing, please power-off again the camera and retry pairing steps. b. The pairing must be completed within 30 seconds, otherwise, you need to retry pairing steps. c. If the camera is powered on all the time during the pairing process, there is no picture displayed as well. d. After successful pairing, if the current channel does not display picture, please check other channels.
PICTURE Operation
1) Press M button to enter menu interface. 2) Press + or – to select PICTURE. Press OK to confirm. 3) Press + or – to select BRIGHTNESS / CONTRAST / HUE ,
press OK to confirm. Press + or – to adjust settings. 4) After all settings are done, press M to return to previous panel,
press it again to exit the menu.
Note: Please note that the “Volume” function is disabled. The system is unable to record and playback sound.
MIR-FLIP Operation
13
ZEROXCLUB Instructions Manual
You can flip the image to front view, mirror view or inverted view according to your needs. There are four options to flip the image on the monitor. The image cannot be rotated by 90°. 1) Press M button to enter menu interface. 2) Press + or – to select MIR-FLIP. Press OK to confirm. 3) Press + or – to select NORMAL / MIRROR / FLIP /
MIR-FLIP, press OK to confirm. 4) After all settings are done, press M to return to previous panel,
press it again to exit the menu.
SYSTEM Operation
1) Press M button to enter menu interface. 2) Press + or – to select SYSTEM. Press OK to confirm. 3) Press + or – to select TIME / LANGUAGE / AUTO-DIM /
P-LINE / DEFAULT, press OK to confirm. Press + or – to
adjust settings.
4) After all settings are done, press M to return to previous panel,
press it again to exit the menu.
AUTO-DIM
DELAY TIME
When this option is “ON”, the monitor will automatically increase the brightness when there is low light. Or you can set this option to “OFF”. Auto Dimming Function. Ignore this function
P-LINE DEFAULT
Turn ON/OFF parking line. Or you can press to turn it ON/OFF. The parking guide line need to be controlled individually on each camera screen. NOTICE If the P-LINE function is not turned on for other camera channels, the parking guideline will not be displayed. Restore default settings. When you turn it on, the camera and monitor need to be re-paired, please refer to the “Pairing Steps”.
PLAY Operation
14
ZEROXCLUB Instructions Manual
1) Press M button to enter menu interface. 2) Press + or – to select PLAY. Press OK to confirm. 3) Press + or – to select the second folder, press OK to
confirm. Press + or – to select the video to be played. 4) After all settings are done, press M to return to previous panel,
press it again to exit the menu.
RECORD Operation
1) Press M button to enter menu interface.
2) Press + or – to select RECORD. Press OK to confirm.
3) Press + or – to select REWRITE / FORMAT, press OK to
confirm. Press + or – to turn on/off.
4) After all settings are done, press M to return to previous panel,
press it again to exit the menu.
REWRITE It will automatically overwrite the previous videos when the SD card
is full. If you turn on it, please remember to save the video file in time
if you need it to avoid it being overwritten.
FORMAT It will clear all data in the system. If not turned off, the formatting
will be always happening. Copy out the useful recording material
first to avoid losing important videos before formatting.
NOTICE Recording can only record what is on the screen, not all
cameras unless in split screen mode. (*Press button
to
start/stop recording.)
TROUBLESHOOTING
15
ZEROXCLUB Instructions Manual
Would not pair with the monitor 1) First ensure the camera has power. 2) Ensure that the antennas on both the screen and camera are securely screwed on. 3) Do not turn on the camera until the pairing count-down had already started. 4) When pairing, power on one camera at a time. Turning on all cameras interferes with
pairing and causes pairing to fail. 5) Try moving the camera closer, or pairing the camera to a different camera number in
the pairing screen. 6) Move the camera and screen into the same room to attempt pairing. 7) If it not pairs, this indicates that you are going over too great a distance, or that
something is causing wireless interference. In this case, you will have to consider relocating the camera to a different. 8) If it still doesn’t pair in the same room, contact our customer service email: sales@uszeroxclub.com.
Monitor and camera disconnected (intermittent / no signal)
1) Check whether the camera still has the remaining power. If the blue power indicator is often on, it means that there is remaining power. If only one lamp is flickering, it means that the camera is out of power and need to be charging. Fully charge the camera first with the USB-C cable. If the camera still displays a blue screen even though it has power, the pairing has been disconnected. Please refer to the manual to re-pair.
2) Chang the the angle of the antenna can improve signal. Move the antenna out a little bit, keeping the tip of the antenna as far away from metal objects as possible. The antenna cling to the sheet metal will weaken the transmission signal. Make sure the antenna of the camera and the monitor is firmly installed.
3) If it disconnects sometimes but comes back on, please spraying contact cleaner on antenna connection on camera.
4) If the vehicle body is aluminum or fiberglass which is blocking the signal and we recommend that you raise the camera to get a direct line of sight signal.
5) Look at the camera/monitor to find if the antenna is off. Check if the antenna screw connector on the camera/monitor is loose.
6) Check if there is an issue with the center conductor of the antenna. 7) Check other devices transmitting on the 2.4g frequency like WIFI, Bluetooth, and
other devices like tire management systems. Stay the electronic devices such as mobile phones away from the monitor to avoid signal interference. 8) If there still has a signal issue with the system after above adjustment, we are willing
16
ZEROXCLUB Instructions Manual
to send you a 10ft antenna extension cable, please contact us via sales@uszeroxclub.com, we will send it to you for free.
Monitor shows a black screen 1) Check if the pin on the inside of the power plug for the monitor is broken off. 2) If using a cigarette lighter installation, check if the cigarette lighter is broken. Check
your fuses to ensure everything is not blown. Use the red and black power cord to test. After plugging the cigarette lighter into the vehicle’s cigarette lighter socket, press the cigarette lighter’s switch and check to see if the cigarette lighter emits a blue light. Or use a data cable to plug into the USB port on the cigarette lighter to see if you can charge your cell phone or other device. 3) Check power at monitor plug and have 12volts? 4) Check the car battery if is good and replaced it. 5) If you have gone through the above checks and still have a black screen, please contact us via sales@uszeroxclub.com with your Amazon order ID.
Unable to Charge 1) Check if the wall socket is off or damaged. 2) Check if the cable or charger is damaged. Use another cable or another 5V/2A
charger to charge the camera and put it in the wall socket. Or you may use other devices to verify the charger and USB-C cable could work well. 3) The camera does not support fast charging protocols, so using a fast charging cable may cause damage to the camera. 4) Bad contact in the charging cable. Unplug and re-insert the charging cable. Ensure the stable connection. 5) Improper charging temperature. For the battery-powered camera, it cannot be charged if the temperature is out of the charging temperature range 0(32) – 45 (113). You may take the camera and battery back to the room and wait for it back to the room temperature to charge for a test. 6) The battery charging input is less than the output. Please turn off the camera to charge it for several hours. 7) To ensure that you have the most current possible running through your charging cable, please use a wall outlet. Using the USB port on a laptop or desktop computer can charge your camera, but it often does so much slower. 8) The Type-C port on the camera is damaged. Check if the port was oxidation/rust,
splitting or water-in. If there is damage to the type-c port, please contact us via
sales@uszeroxclub.com with your Amazon order ID and issue picture. The monitor is upside down
17
ZEROXCLUB Instructions Manual
Make sure the screen back to the non-menu panel, then press and hold the
button
to a few seconds to rotate it.
Camera shuts off after working for a few minutes, press the power button
again, it works for a few minutes and then shuts off again.
When the camera is low battery, it may cut off power after a few minutes, and then, when
turned on again, it may work for a few more minutes before the power is cut off once
more. Therefore, please recharge it using the included Type-C cable to ensure a fully
charge before use.
If you have any questions not mentioned above, just feel free to
email us at sales@uszeroxclub.com. We’re always there for you!
FAQS
Question
The suction cup mount doesn’t stick to dashboard, what should I do?
Can I turn on/off the camera from inside the truck?
Does it only comes on when I am in reverse?
Answer
If the rough surface of the dash did not work, you can plan ahead and make sure the surface is smooth, like glass or plastic. Clean the windshield thoroughly (inside) then place it, it will stick, if it doesn’t then wash the rubber/suction part then try again If the surface is NON-SMOOTH or NOT-FLAT, you can use sticky adhesive or double-sided circle or a small piece of sturdy velcro to help it mount. Yes. You can turn on the camera first and then press the switch on the car charger to cut off the monitor’s power; the camera will automatically turn off about 1 minute later. The camera will also turn on automatically about 1 minute after you connect the monitor again. No, this is completely wireless and there are no wires which connect to the backup lights. If you have it always plugged-in to your car’s power outlet, it comes on when you fire up the
18
ZEROXCLUB Instructions Manual
car. There is also a button on the charger you
can manually push to turn it on/off anytime.
Press OK button, a sign will appear on the top
How to start to record video?
center of the screen and the monitor will start to
record. Press it again to stop record
1.Use a wall outlet to charge the camera:
Plug the USB end of the charging cable into the
USB wall charger.
Plug the other end into the camera’s type-c port.
Plug the charge into the wall outlet.
2.Charge the camera with a batter pack:
Charge your power bank in advance and
remember to take it with you when you won’t
have access to wall outlet.
Plug the charging cable into the batter pack and
into your camera. How to charge the backup camera?
5. Adjusting solar panel so it can receive direct
sunlight. Solar charging can only extend the
working time, it is recommended to use the
type-c charging.
Note: Turn off the camera while charging.
Note: Due to the size limitations of the solar
panels, solar charging will be less efficient than
the rate of power consumption, and it is best to
use solar power as a means of extending the
operating time of the camera. It is necessary to
charge with a charger regularly.
How do I keep my backup camera clean in the winter?
We suggest to coat the camera lens with a hydrophobic fluid, such as Rain-X, as a way to keep snow and slush from clinging to the lens.
How to turn on the night vision of the It will be automatically turned on in the dark
camera?
environment.
How to turn on/off the Parking
1. Press
button.
Guideline?
2. MENU SYSTEM P-LINE ON/OFF.
19
ZEROXCLUB Instructions Manual
Why the screen is flicking?
There is nothing for magnet to stick on with vehicle.
What if I am not satisfied with this product?
It might be caused by the current, please make sure the current draw on the camera and monitor is 2A. Check proper wiring to avoid loose and poor attachments and connections of wires, as this may affect the delivery of images. Aluminum and fiberglass magnets vehicle body is weakly attracted to a magnetic base. We recommend that you can purchase a metal plate and bolts from the local hardware store. After cutting it down to size and used the bolts that you through-bolted to the vehicle. Or use Loctite Power Grab adhesive to secure a metal plate similar in size to the camera and mount it on the vehicle where you want to place the camera. We offer a 18-month warranty and 30 days money back guarantee on all our products. If you have any problems with the product, please feel free to contact us via sales@uszeroxclub.com. We will reply you within 24 hours.
SAFETY INFORMATION
There are no user-serviceable parts inside the ZEROXCLUB camera system. Contact ZEROXCLUB customer service at sales@uszeroxclub.com if the part is ever compromised. Do not disassemble or attempt to repair any part of the camera system. Children should be supervised to ensure that they do not play with the appliance. Use this product within the voltage range specified. Failure to do so can cause electronic shock or product malfunction.
20
ZEROXCLUB Instructions Manual
Do not install the monitor where it may obstruct drivers view or obstruct an air bag device. Do not operate the monitor while driving, as it may cause an accident. Dropping the unit may cause possible mechanical failure.
SPECIFICATIONS
Monitor
LCD Display
10”
Monitor Connector Item Weight Power Supply Monitor Dimensions
Image Sensor Effective Pixels
DC female connector 0.19 pounds DC 12V 10(L) x 6.5(H) x 0.94(D) in
Camera
CMOS 1920 x 1080
Waterproof Rating Charging Voltage View Angle Operating Temperature Item Weight Solar Panel Size Camera Dimensions
Battery Capacity
IP69K DC 5V 2A 140° -4°F~ 158°F 1.54 pounds 3.8(L) x 2.4(H) x 0.19(D) in 4.29(L) x 3.3(H) x 2.9(D) in
Others
9600MaH
USB Charging Time
6 Hours
21
ZEROXCLUB Instructions Manual
Continuous Working
About 8-10 Hours
Time (Fully Charged)
Maximum Signal Range: 55 feet
22
Documents / Resources
 |
ZEROXCLUB BD102 Solar Wireless Backup Camera System [pdf] User Manual BD102, BD102 Solar Wireless Backup Camera System, Solar Wireless Backup Camera System, Wireless Backup Camera System, Backup Camera System, Camera System |