ZELOTES F-33pro Wireless Programmable Mouse Instruction Manual

ZELOTES F-33pro Wireless Programmable Mouse

Package Contents

Package Contents (attachment)

• Mouse x1
• Receiver x1
• Instructions x1
• Charging cable x1

Compatibility

With Receiver

• Windows ® 11 or later / Windows ® 10/Windows ® 8,Windows ® 7
• macOS 10.10 or later
• Chrome OS TM
• linux Kernel 2.6
• Bluetooth ® low energy technology
• Windows ® 11 or later / Windows ® 10/Windows ® 8
• macOS 10.10 or later
• Chrome OS TM,Android TM 5.0 or later

Product Structure Diagram

Functions

Notes on the functions of components

1. Left button
2. Right button
3. Scroll wheel
4. Forward button
5. Back button
6. Adjust DPI mode
7. Rotary Button
8. Bluetooth
9. Power on/off
10. Receiver
11. Trackball

Specifications

• Number of Buttons: 8
• Tracking System: Optical
• Frequency: 2402.85MHZ-2480.85MHz
• Effective Distance: >10m
• Operating Voltage/Current: 3.7 V 25 mA
• Button Durability: 3 million times
• Wheel Durability: 1.2 million times
• Product Dimensions: 0°132*102*29mm，18°132*100*62mm
• Product Weight:265 ± 5 g
• DPI: 400-800-1200-1600-2400-4800-8000DPI
• 2.4 GHz Report Rate: 125 -1000Hz
• Bluetooth Report Rate: 133Hz

Bluetooth Mode

Pair Your First Device

1. Turn on the power switch.
2.  In Bluetooth mode, hold the Bluetooth key for over 3 seconds. The screen flashes “Linking” rapidly,
3. Compete Bluetooth pairing on your device: Windows 7 and 8:
   • Click Start, then select Control Panel > Add Devices.
   • Select BT Pro 1 or BT Pro 2 in the list, then click Next. Windows 10:
     • Click Start, then select Settings > Device > Bluetooth.
     • Select BT Pro 1 or BT Pro 2 in the list, then click Pair.

Pair Your Second Device.

1. Short press the Bluetooth button to switch channel.
2. Follow Steps 2 and 3 in “Pair Your First Device” to complete pairing.
3. Switch between devices.Short press the Bluetooth button to switch between up to 3 paired devices (Up to 2 devices via Bluetooth and 1 device via the 2.4 GHz receiver).

Rotary Button Operation Guide:
To set a function like “Volume Adjustment”, rotate the button to the corresponding icon, then press it to confirm. The text turns white from blue, indicating a successful setup. Rotating the button again adjusts the volume. Press the button once more to cancel the function.

Charging and Low Battery Alert:
When the battery drops below 20%, the screen flashes “BAT LOW”. Charge the mouse, which automatically switches to wired mode. The screen displays “100%” when fully charged.

Resolution Adjustment:
Press Key 6 to adjust the cursor movement speed, which is displayed on the screen: 400, 800, 1200, 1600, 2400, 4800, and 8000 DPI (7 settings).

Precautions

• Do not expose it to liquid
• Do not disassemble it
• Avoid dropping it
• Avoid extremely high or low temperature

Declaration of Conformity
The product conforms to EC standards for radio interference. Here, Master Electronic Technology Co., Ltd. in Shenzhen announces that F-33 Pro radio equipment conforms to the Directive 2014/53/EU. The full text of the EU Declaration of Compliance can be found on: http://www.zelotes.cn/en/InfoPages_106.html
Maximum Output Power: OdBm.
Frequency Range: 2.4g band (2402.85MHz-2480.85MHz)

FCC Statement

1. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
   • The device may not cause harmful interference.
   • The device must accept any interference received, including that may cause undesired operation.
2. Changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna
• Increase distance between the equipment and receiver.
• Plug the equipment into a socket on a circuit different from that to which the receiver is connected.
• Consult your distributor or an experienced radio/TV technician for help.

Model: F-33 Pro or FCC ID: 2AIRKF-35
Trademark number： No.013426986

The device conforms to Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) The device may not cause harmful interference, and (2) the device must accept any interference received, including interference that may cause undesired operation.

The symbol means the product should not be disposed of with household waste but be brought to an appropriate collection point to enable recycling. According to local regulations, do not dispose of the product or rechargeable battery with normal household waste. Appropriate disposal of used products and rechargeable batteries helps to prevent negative impacts on the environment and human health.

warranty

Customer Service
Limited warranty for 18 months
Lifelong technical support

Trackball Maintenance

1. The adjustable hinge enables you to choose a 0° or 18° angle.
2. The trackball can be removed and cleaned, to move more smoothly.

• Step 1 Through the round hole on the bottom of the mouse, eject the trackball out of its socket.
• Step 2 Take out the trackball, and wipe its socket with a cotton swab cautiously.
• Step 3 Put the trackball back into the mouse.

(Note: Illustrations referenced in this manual are for function description purpose only. Please refer to the actual product when purchasing!)

Troubleshooting

What If the Mouse Does Not Respond?

• Ensure the mouse is powered on.
• Check if the mouse is correctly paired with your device (refer to Bluetooth pairing instructions).
• If using the 2.4 GHz receiver, ensure it is properly plugged into your computer.
• Try recharging the mouse if the battery is low.
• If interference is suspected, try the following for FCC compliance:
  • Reorient or relocate the receiving antenna.
  • Increase distance between the equipment and receiver.
  • Plug the equipment into a socket on a circuit different from that to which the receiver is connected.
  • Consult your distributor or an experienced radio/TV technician for help.

MOREINFO

For more information on the functions, please go to the official website and download the drivers for programming: Http://www.zelotes.cn)