WS50 WEARABLE COMPUTER
ACCESSORIES GUIDE
Revised April 5, 2022
WS50 Converged Assembly
WS50 Converged Spare Battery and Charger
Spare 1300mAh Li-ion Battery
BTRY-WS5X-13MA-01
PowerPrecision Spare Lithium-Ion battery, 1300mAh, for WS50 Converged
WS50 Converged, Four Slot Spare Battery Charger
SAC-WS5X-4S13-01: WS50
Converged four slot spare battery charger, charges four 1300mAh batteries. LEDs on the cradle indicate charge status of each battery.
Power supply for single cradle
 |
PWR-BGA12V50W0WW Level VI AC/DC Power Supply AC Input: 100-240V, 2.4A DC Output: 12V, 4.16A, 50W Requires: DC line cord and Country specific grounded AC line cord. |
 |
CBL-DC-388A1-01 DC Line Cord for running the single slot cradles or battery chargers from a single Level VI power supply PWR-BGA12V50W0WW |
 |
23844-00-00R US AC line cord, 7.5 feet long, grounded, three wire for power supplies. |
Charging LED indicators
| Off | Battery not charging |
| Solid Amber | Healthy battery charging |
| Solid Green | Healthy battery charging complete |
| Fast Blink Red | Charging error |
| Solid Red | Unhealthy battery |
WS50 Converged Single Charging Cradle
WS50 Converged, Two Slot Device Cradle
CRD-WS5X-2SCV-01: Two slot charge-only cradle, charges two WS50 Converged devices. LED near the top of the WS50 display indicate charge status of each device. “Stadium” positioning enables viewability of the display on the rear device while a device is placed in the front slot.
Power supply for single cradle
|
PWR-BGA12V50W0WW Level VI AC/DC Power Supply AC Input: 100-240V, 2.4A DC Output: 12V, 4.16A, 50W Requires: DC line cord and Country specific grounded AC line cord. |
|
CBL-DC-388A1-01 DC Line Cord for running the single slot cradles or battery chargers from a single Level VI power supply PWR-BGA12V50W0WW |
|
23844-00-00R US AC line cord, 7.5 feet long, grounded, three wire for power supplies. |
Charging LED indicators
| Off | Battery not charging |
| Solid Amber | Healthy battery charging |
| Solid Green | Healthy battery charging complete |
| Fast Blink Red | Charging error |
| Solid Red | Unhealthy battery |
WS50 Converged Multi-Slot Device Cradle
WS50 Converged, 10 Slot Device Cradle
CRD-WS5X-10SCV-01: Ten slot charge-only cradle, charges ten WS50 Converged devices. LED near the top of the WS50 display indicate charge status of each device.
Power supply for multi-slot cradle
 |
PWR-BGA12V108W0WW Level VI AC/DC Power Supply AC Input: 100-240V, 2.8A DC Output: 12V, 9A, 108W. |
 |
CBL-DC-381A1-01 DC Line Cord for running multi-slot cradles from a single Level VI power supply PWR-BGA12V108W0WW |
|
23844-00-00R US AC line cord, 7.5 feet long, grounded, three wire for power supplies. |
 |
BRKT-SCRD-SMRK-01 Rack/Wall Mounting bracket for multi-slot cradles. |
Charging LED indicators
| Off | Battery not charging |
| Solid Amber | Healthy battery charging |
| Solid Green | Healthy battery charging complete |
| Fast Blink Red | Charging error |
| Solid Red | Unhealthy battery |
WS50 Converged Multi-Slot Battery Charger
WS50 Converged, 20 Slot Spare Battery Charger
SAC-WS5X-20S13-01: WS50 Converged twenty slot spare battery charger, charges four 1300mAh batteries. LEDs on the cradle indicate charge status of each battery.
Power supply for multi-slot cradle
|
PWR-BGA12V108W0WW Level VI AC/DC Power Supply AC Input: 100-240V, 2.8A DC Output: 12V, 9A, 108W . |
|
CBL-DC-381A1-01 DC Line Cord for running multi-slot cradles from a single Level VI power supply PWR-BGA12V108W0WW |
|
23844-00-00R US AC line cord, 7.5 feet long, grounded, three wire for power supplies. |
|
BRKT-SCRD-SMRK-01 Rack/Wall Mounting bracket for multi-slot cradles. |
Charging LED indicators
| Off | Battery not charging |
| Solid Amber | Healthy battery charging |
| Solid Green | Healthy battery charging complete |
| Fast Blink Red | Charging error |
| Solid Red | Unhealthy battery |
WS50 Converged Multi-Slot Ethernet Cradle
WS50 Converged, 5 Slot Ethernet Cradle with Spare Battery Charger
CRD-WS5X-5SECV-01: WS50 Converged Five Slot Ethernet Cradle with Spare Battery Charger, charges 5 WS50 Converged devices and 5 spare 1300mAh batteries. LED near the top of the WS50 display indicate charge status of each device. LEDs on the cradle indicate charge status of each battery.
Power supply for multi-slot cradle
|
PWR-BGA12V108W0WW Level VI AC/DC Power Supply AC Input: 100-240V, 2.8A DC Output: 12V, 9A, 108W . |
|
CBL-DC-381A1-01 DC Line Cord for running multi-slot cradles from a single Level VI power supply PWR-BGA12V108W0WW |
|
23844-00-00R US AC line cord, 7.5 feet long, grounded, three wire for power supplies. |
|
BRKT-SCRD-SMRK-01 Rack/Wall Mounting bracket for multi-slot cradles. |
Charging LED indicators
| Off | Battery not charging |
| Solid Amber | Healthy battery charging |
| Solid Green | Healthy battery charging complete |
| Fast Blink Red | Charging error |
| Solid Red | Unhealthy battery |
WS50 Charge Cable
WS50 Charge Cable
CBL-WS5X-USB1-01 : WS50 charge cable. Provides charging and communications. Snaps on to bottom of WS50 device. Cable length 6 inches / 15cm. USB-C female port enables client-host connectivity. Requires separate purchase of USB-C cable and AC power adapter. 
Accessories for WS50 charge cable
 |
PWR-WUA5V12W0XX Power Supply-100-240 VAC, 5 V, 2.5 A with country specific plugs. |
 |
CBL-TC5X-USBC2A-01 USB-C to USB-A communication and charging cable, 1M length |
Charging LED indicators
| Off | Battery not charging |
| Solid Amber | Healthy battery charging |
| Solid Green | Healthy battery charging complete |
| Fast Blink Red | Charging error |
| Solid Red | Unhealthy battery |
WS50 Converged Two Finger Mount
WS50 Two Finger Trigger Mount
SG-WS5X-TRGA-01: WS50 Converged replacement trigger mount. Includes strap and finger pad.
Accessories for WS50 back of hand mount
 |
SG-WS5X-STRP-10 Replacement finger strap for WS50 Converged,10 pack |
 |
SG-WS5X-SHLCS-01 Replacement protective shell for WS50 Converged. Two input buttons. |
 |
SG-WS5X-DFLTC-01 Replacement protective deflector for WS50 Converged. Includes mounting screws. |
 |
SG-WS5X-SCRNP1-01 Replacement screen protector for WS50 display. |
WS50 Converged Back of Hand Mount
WS50 Back of Hand Mount
SG-WS5X-BHMT-01 : WS50 Converged back of hand mount. Includes mounting plate and trigger assembly. Requires separate purchase of hand wrap.
| Part # | Hand / Size |
| SG-WEAR-HNWPRS-01 | Right, small |
| SG-WEAR-HNWPLS-01 | Left, small |
| SG-WEAR-HNWPRM-01 | Right, medium |
| SG-WEAR-HNWPLM-01 | Left, medium |
| SG-WEAR-HNWPRL-01 | Right, large |
| SG-WEAR-HNWPLL-01 | Left, large |
Accessories for WS50 back of hand
 |
SG-WEAR-HNWPXX-01 Spare Hand Wrap for WS50 Back of Hand Mount. Available in small, medium, large and left, right. |
|
SG-WS5X-SHLCS-01 Replacement protective shell for WS50 Converged. Two input buttons. |
|
SG-WS5X-DFLTC-01 Replacement protective deflector for WS50 Converged. Includes mounting screws. |
|
SG-WS5X-SCRNP1-01 Replacement screen protector for WS50 display. |
Documents / Resources
 |
Zebra WS50 Wearable Computer Accessories [pdf] User Guide BTRY-WS5X-13MA-01, SAC-WS5X-4S13-01, CRD-WS5X-2SCV-01, WS50 Wearable Computer Accessories, WS50, WS50 Wearable Computer, Wearable Computer, Wearable Computer Accessories |
 |
ZEBRA WS50 Wearable Computer Accessories [pdf] User Guide WS50 Converged Assembly, WS50 Wrist Assembly, BTRY-WS5X-13MA-01, PWR-BGA12V50W0WW, CBL-DC-388A1-01, SAC-WS5X-4S13-01, 23844-00-00R, BTRY-WS5X-8MA-01, SAC-WS5X-4S8-01, WS50, WS50 Wearable Computer Accessories, Wearable Computer Accessories, Computer Accessories, Accessories |