MK3100-MK3190 Micro Interactive Kiosk
“
Specifications:
- Model Numbers: MK3100, MK3190
- Mounting: VESA mount with 100 mm specification
- Wireless Information: Applies only to MK3190
- Approved Radio Module: Zebra 21-148603-0B RLAN & BT
Product Usage Instructions:
Unpacking:
1. Remove the MK3100/3190 from its packing and inspect it for
damage.
2. Keep the packing for possible future shipping needs.
Mounting:
1. Use a VESA mount that conforms to the 100 mm
specification.
2. Use M4 x 8.1 mm screws for mounting, ensuring the length does
not exceed 8.1 mm.
3. Align VESA mounting holes with the device’s back holes.
4. Insert screws through each aligned hole to securely mount the
device.
Health and Safety Recommendations:
– Follow ergonomic recommendations for usage.
– Ensure compliance with regulatory information provided.
Ferrite Core Placement:
1. Open the ferrite core and place it on the Ethernet cable.
2. Route the cable outside the ferrite core once and then close
the ferrite core.
FAQ:
Q: Can I use any mounting screws for the device?
A: No, ensure to use M4 x 8.1 mm screws for mounting to prevent
damage to the device housing.
Q: Is it safe to use wireless devices in hospitals?
A: Wireless devices should be switched off in hospitals to
prevent interference with medical equipment.
“`
MK3100/3190
Quick Reference Guide
Unpacking
Remove the MK3100/3190 from its packing and inspect it for damage. Keep the packing, it is the approved shipping container and should be used if the device needs to be returned for servicing.
MK3100/3190 Parts
Microphone
Touch Screen / LCD
Function Buttons Speakers
Scanner Window
Mounting
Use a standard VESA mount to mount the device:
1. Select a VESA mount that conforms to the 100 mm VESA specification. 2. The device’s mounting inserts are M4 x 8.1 mm. When selecting an appropriate
screw type, ensure its length does not penetrate the device’s back housing more than 8.1 mm after going through the mounting plate. 3. Align the VESA mounting holes with the mounting holes on the back of the device. 4. Insert the screws through each of the four aligned mounting holes.
Health and Safety Recommendations
Ergonomic Recommendations
Caution: In order to avoid or minimize the potential risk of ergonomic injury follow the recommendations below. Consult with your local Health & Safety Manager to ensure that you are adhering to your company’s safety programs to prevent employee injury. · Reduce or eliminate repetitive motion · Maintain a natural position · Reduce or eliminate excessive force · Keep objects that are used frequently within easy reach · Perform tasks at correct heights · Reduce or eliminate vibration · Reduce or eliminate direct pressure · Provide adjustable workstations · Provide adequate clearance · Provide a suitable working environment · Improve work procedures.
Regulatory Information
This guide applies to the following Model Numbers: MK3100, MK3190
All wireless information only applies to MK3190.
All Zebra devices are designed to be compliant with rules and regulations in locations they are sold and will be labeled as required.
Local language translations are available at the following website: http://www.zebra.com/support
Any changes or modifications to Zebra equipment, not expressly approved by Zebra, could void the user’s authority to operate the equipment.
Only use Zebra approved and UL Listed accessories.
Declared maximum operating temperature: 40°C.
Avertissement: Le dispositive fonctionnant dans la bande 5150-5250 MHz est réservé uniquement pour une utilisation à l’intérieur afin de réduire les risques de brouillage préjudiciable aux systèmes de satellites mobiles utilisant les mêmes canaux. Les utilisateurs de radars de haute puissance sont désignés utilisateurs principaux (c.-à-d., qu’ils ont la priorité) pour les bands 5250-5350 MHz et 5650-5850 MHz et que ces radars pourraient causer du brouillage et/ou des dommages aux dispositifs LAN-EL. 2.4 GHz Only The available channels for 802.11 b/g operation in the US are Channels 1 to 11. The range of channels is limited by firmware.
Warnings for Use of Wireless Devices
Please observe all warning notices with regard to the usage of wireless devices. Potentially Hazardous Atmospheres – Vehicles Use You are reminded of the need to observe restrictions on the use of radio devices in fuel depots, chemical plants etc. and areas where the air contains chemicals or particles (such as grain, dust, or metal powders) and any other area where you would normally be advised to turn off your vehicle engine. Potentially Hazardous Atmospheres – Fixed Installations You are reminded of the need to observe restrictions on the use of radio devices in fuel depots, chemical plants etc. and areas where the air contains chemicals or particles (such as grain, dust, or metal powders). Safety in Aircraft Switch off your wireless device whenever you are instructed to do so by airport or airline staff. If your device offers a ‘flight mode’ or similar feature, consult airline staff as to its use in flight.
Safety in Hospitals
Wireless devices transmit radio frequency energy and may affect medical electrical equipment. Wireless devices should be switched off wherever you are requested to do so in hospitals, clinics or healthcare facilities. These requests are designed to prevent possible interference with sensitive medical equipment.
Zebra reserves the right to make changes to any product to improve reliability, function, or design. Zebra does not assume any product liability arising out of, or in connection with, the application or use of any product, circuit, or application described herein. No license is granted, either expressly or by implication, estoppel, or otherwise under any patent right or patent, covering or relating to any combination, system, apparatus, machine, material, method, or process in which Zebra products might be used. An implied license exists only for equipment, circuits, and subsystems contained in Zebra products.
Zebra Technologies Corporation Lincolnshire, IL U.S.A. http://www.zebra.com © 2017 ZIH Corp and/or its affiliates. All rights reserved. ZEBRA and the stylized Zebra head are trademarks of ZIH Corp, registered in many jurisdictions worldwide. All other trademarks are the property of their respective owners.
72-167095-04 Revision A — April 2017
Back View
Mounting Hole (4)
Cable Run
Cable Run
Mini-USB Host/ Client Port Mini-USB
Host Ports (2)
Headset Jack
MicroSD Card Slot
Cable Run
Power RJ45 (Ethernet) Reset Button
Ferrite Core Placement
You must place a ferrite core (Zebra p/n 34.10P16.001) on the Ethernet cable as follows:
1. Open the ferrite core and place it on the cable. 2. Route the cable outside the ferrite core once and then close the ferrite core.
Note:
· Supports standard 10/100Mbps Ethernet network. · Use Zebra approved Mini-USB cable (optional).
Radio Modules
The device contains an approved radio module. The module is identified below.
Zebra 21-148603-0B RLAN & BT.
Wireless Device Country Approvals
Operation of the device without regulatory approval is illegal.
Regulatory markings, subject to certification, are applied to the device signifying the radio(s) is/are approved for use in the following countries: United States, Canada, Japan, China, S. Korea, Australia, and Europe1. Please refer to the Declaration of Conformity (DoC) for details of other country markings. This is available at http://www.zebra.com/doc Note1: For 2.4GHz or 5GHz Products: Europe includes, Austria, Belgium, Bulgaria, Czech Republic, Cyprus, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Liechtenstein, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovak Republic, Slovenia, Spain, Sweden, Switzerland and the United Kingdom.
Country Roaming
This device incorporates the International Roaming feature (IEEE802.11d) which will ensure the product operates on the correct channels for the particular country of use.
Ad-Hoc Operation (5 GHz band)
Ad-Hoc operation is limited to Channels 36-48 (5150-5250 MHz). Use of this band is restricted to Indoor Use Only, any other use will make the operation of this device illegal.
Frequency of Operation – FCC and IC
5 GHz Only The use in the UNII (Unlicensed National Information Infrastructure) band 1 (5150-5250 MHz) is restricted to Indoor Use Only; any other use will make the operation of this device illegal. Industry Canada Statement: Caution: The device for the band 5150-5250 MHz is only for indoor usage to reduce potential for harmful interference to co-Channel mobile satellite systems. High power radars are allocated as primary users (meaning they have priority) of 5250-5350 MHz and 5650-5850 MHz and these radars could cause interference and/or damage to LE-LAN devices.
Pacemakers
Pacemaker manufacturers recommended that a minimum of 15cm (6 inches) be maintained between a handheld wireless device and a pacemaker to avoid potential interference with the pacemaker. These recommendations are consistent with independent research and recommendations by Wireless Technology Research. Persons with pacemakers: · Should ALWAYS keep the device more than 15cm (6 inches) from their pacemaker
when turned ON. · Should not carry the device in a breast pocket. · Should use the ear furthest from the pacemaker to minimise the potential for
interference. · If you have any reason to suspect that interference is taking place, turn OFF your
device.
Other Medical Devices
Please consult your physician or the manufacturer of the medical device, to determine if the operation of your wireless product may interfere with the medical device.
RF Exposure Guidelines
Safety Information
Reducing RF Exposure – Use Properly Only operate the device in accordance with the instructions supplied. International The device complies with internationally recognized standards covering human exposure to electromagnetic fields from radio devices. For information on “International” human exposure to electromagnetic fields refer to the Zebra Declaration of Conformity (DoC) at http://www.zebra.com/doc. Europe To satisfy EU RF exposure requirements, a mobile transmitting device must operate with a minimum separation distance of 20 cm or more from a person’s body. Co-located statement To comply with FCC RF exposure compliance requirement, the antenna used for this transmitter must not be co-located or operating in conjunction with any other transmitter/ antenna except those already approved in this filling.
Remote and Standalone Antenna Configurations To comply with FCC RF exposure requirements, antennas that are mounted externally at remote locations or operating near users at stand-alone desktop of similar configurations must operate with a minimum separation distance of 20 cm from all persons.
LED Devices
Classified as EXEMPT RISK GROUP according to IEC 62471:2006 and EN 62471:2008. Pulse duration: 10.3 ms
LED light is emitted from this aperture:
Radio Frequency Interference Requirements – Canada
This Class B digital apparatus complies with Canadian ICES-003. Cet appareil numérique de la classe B est conforme à la norme NMB-003 du Canada.
Radio Transmitters
For RLAN Devices: The use of 5 GHz RLAN’s, for use in Canada, have the following restrictions: · Restricted Band 5.60 – 5.65 GHz This device complies with RSS 210 of Industry & Science Canada. Operation is subject to the following two conditions: (1) this device may not cause harmful interference and (2) this device must accept any interference received, including interference that may cause undesired operation. Ce dispositif est conforme à la norme CNR-210 d’Industrie Canada applicable aux appareils radio exempts de licence. Son fonctionnement est sujet aux deux conditions suivantes: (1) le dispositif ne doit pas produire de brouillage préjudiciable, et (2) ce dispositif doit accepter tout brouillage reçu, y compris un brouillage susceptible de provoquer un fonctionnement indésirable.
Label Marking: The Term “IC:” before the radio certification only signifies that Industry Canada technical specifications were met.
CE Marking and European Economic Area (EEA)
The use of 5GHz RLAN throughout the EEA has the following restriction:
· 5.15 – 5.35 GHz is restricted to indoor use only.
Statement of Compliance for MK3190
Zebra hereby declares that this radio equipment is in compliance with Directive 2011/65/ EU and 1999/5/EC or 2014/53/EU (2014/53/EU supersedes 1999/5/EC from 13th June 2017). The full text of the EU Declaration of Conformity is available at the following internet address: http://www.zebra.com/doc.
Statement of Compliance for MK3100
Zebra hereby declares that this device is in compliance with all applicable Directives, 2014/30/EU, 2014/35/EU and 2011/65/EU. The full text of the EU Declaration of Conformity is available at the following internet address: http://www.zebra.com/doc.
Chile
“Este equipo cumple con la Resolución No 403 de 2008, de la Subsecretaria de telecomunicaciones, relativa a radiaciones electromagnéticas.”.
China
Mexico
Restrict Frequency Range to: 2.450 – 2.4835 GHz.
S. Korea
For a radio equipment using 2400~2483.5MHz or 5725~5825MHz, the following two expressions should be displayed.
.
Taiwan
5.25-5.35
Italiano: per i clienti dell’UE: tutti i prodotti che sono giunti al termine del rispettivo ciclo di vita devono essere restituiti a Zebra al fine di consentirne il riciclaggio. Per informazioni sulle modalità di restituzione, visitare il seguente sito Web: http://www.zebra.com/weee. Latviesu: ES klientiem: visi produkti pc to kalposanas mza beigm ir jnogd atpaka Zebra otrreizjai prstrdei. Lai iegtu informciju par produktu nogdsanu Zebra, ldzu, skatiet: http://www.zebra.com/weee. Lietuvi: ES vartotojams: visi gaminiai, pasibaigus j eksploatacijos laikui, turi bti grzinti utilizuoti kompanij ,,Zebra”. Daugiau informacijos, kaip grzinti gamin, rasite: http:// www.zebra.com/weee. Magyar: Az EU-ban vásárlóknak: Minden tönkrement terméket a Zebra vállalathoz kell eljuttatni újrahasznosítás céljából. A termék visszajuttatásának módjával kapcsolatos tudnivalókért látogasson el a http://www.zebra.com/weee weboldalra. Malti: Gal klijenti fl-UE: il-prodotti kollha li jkunu waslu fl-aar tal-ajja ta’ l-uu taghom, iridu jiu rritornati gand Zebra gar-riikla. Gal aktar tagrif dwar kif gandek tirritorna lprodott, jekk jogbok ur: http://www.zebra.com/weee. Nederlands: Voor klanten in de EU: alle producten dienen aan het einde van hun levensduur naar Zebra te worden teruggezonden voor recycling. Raadpleeg http://www.zebra.com/weee voor meer informatie over het terugzenden van producten. Polski: Klienci z obszaru Unii Europejskiej: Produkty wycofane z eksploatacji nale¿y zwróciæ do firmy Zebra w celu ich utylizacji. Informacje na temat zwrotu produktów znajduj¹ siê na stronie internetowej http://www.zebra.com/weee. Português: Para clientes da UE: todos os produtos no fim de vida devem ser devolvidos à Zebra para reciclagem. Para obter informações sobre como devolver o produto, visite: http:// www.zebra.com/weee. Românesc: Pentru clienii din UE: Toate produsele, la sfâritul duratei lor de funcionare, trebuie returnate la Zebra pentru reciclare. Pentru informaii despre returnarea produsului, accesai: http://www.zebra.com/weee. Slovencina: Pre zákazníkov z krajín EU: Vsetky výrobky musia by po uplynutí doby ich zivotnosti vrátené spolocnosti Zebra na recykláciu. Blizsie informácie o vrátení výrobkov nájdete na: http://www.zebra.com/weee. Slovenski: Za kupce v EU: vsi izdelki se morajo po poteku zivljenjske dobe vrniti podjetju Zebra za reciklazo. Za informacije o vraèilu izdelka obisèite: http://www.zebra.com/weee. Suomi: Asiakkaat Euroopan unionin alueella: Kaikki tuotteet on palautettava kierrätettäväksi Zebra-yhtiöön, kun tuotetta ei enää käytetä. Lisätietoja tuotteen palauttamisesta on osoitteessa http://www.zebra.com/weee. Svenska: För kunder inom EU: Alla produkter som uppnått sin livslängd måste returneras till Zebra för återvinning. Information om hur du returnerar produkten finns på http://www.zebra.com/weee. Türkçe: AB Müterileri için: Kullanim süresi dolan tüm ürünler geri dönütürme için Zebra’ya iade edilmelidir. Ürünlerin nasil iade edilecei hakkinda bilgi için lütfen u adresi ziyaret edin: http://www.zebra.com/weee.
Power Supply
This device must be powered from an 802.3af or 802.3at compliant power source which has been certified by the appropriate agencies, or by a LISTED, Type no. PWRS-14000 (12Vdc, 4.16A) direct plug-in power supply, marked Class 2 or LPS (IEC60950-1, SELV). Use of alternative Power Supply will invalidate any approvals given to this unit and may be dangerous.
Radio Frequency Interference Requirements-FCC
Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
· Reorient or relocate the receiving antenna · Increase the separation between the equipment and receiver · Connect the equipment into an outlet on a circuit different from that to which the
receiver is connected · Consult the dealer or an experienced radio/TV technician for help.
Radio Transmitters (Part 15)
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
The use of 5 GHz WLAN’s, for use in the U.S., has the following restrictions:
· Notched Band 5.60 – 5.65 GHz
Japan (VCCI) – Voluntary Control Council for Interference Class B ITE
Korea Warning Statement for Class B ITE
Other Countries Ukraine
This equipment corresponds to requirements of the Technical Regulation No. 1057, 2008 on restrictions as to the use of some dangerous substances in electric and electronic devices.
Australia
Use of 5GHz RLAN’s in Australia is restricted in the following band 5.50 – 5.65GHz.
Brazil
Regulatory declarations for MK3190 – BRAZIL Declarações Regulamentares para MK3190 – BRAZIL Nota: “A marca de certificação se aplica ao Transceptor, modelo MK3190. Este equipamento opera em caráter secundário, isto é, não tem direito a proteção contra interferência prejudicial, mesmo de estações do mesmo tipo, e não pode causar interferência a sistemas operando em caráter primário.” Para maiores informações sobre ANATEL consulte o site: www.anatel.gov.br
Eurasian Customs Union
EAC.
Waste Electrical and Electronic Equipment (WEEE)
English: For EU Customers: All products at the end of their life must be returned to Zebra for recycling. For information on how to return product, please go to: http://www.zebra.com/weee. Bulgarish: : Zebra . , : http://www.zebra.com/weee. Cestina: Pro zákazníky z EU: Vsechny produkty je nutné po skonèení jejich zivotnosti vrátit spoleènosti Zebra k recyklaci. Informace o zpùsobu vrácení produktu najdete na webové stránce: http://www.zebra.com/weee. Dansk: Til kunder i EU: Alle produkter skal returneres til Zebra til recirkulering, når de er udtjent. Læs oplysningerne om returnering af produkter på: http://www.zebra.com/weee. Deutsch: Für Kunden innerhalb der EU: Alle Produkte müssen am Ende ihrer Lebensdauer zum Recycling an Zebra zurückgesandt werden. Informationen zur Rücksendung von Produkten finden Sie unter http://www.zebra.com/weee. : ..: , , Zebra . , http://www.zebra.com/weee . Eesti: EL klientidele: kõik tooted tuleb nende eluea lõppedes tagastada taaskasutamise eesmärgil Zebra’ile. Lisainformatsiooni saamiseks toote tagastamise kohta külastage palun aadressi: http://www.zebra.com/weee. Español: Para clientes en la Unión Europea: todos los productos deberán entregarse a Zebra al final de su ciclo de vida para que sean reciclados. Si desea más información sobre cómo devolver un producto, visite: http://www.zebra.com/weee. Français : Clients de l’Union Européenne : Tous les produits en fin de cycle de vie doivent être retournés à Zebra pour recyclage. Pour de plus amples informations sur le retour de produits, consultez : http://www.zebra.com/weee. Hrvatski: Za kupce u Europskoj uniji: Svi se proizvodi po isteku vijeka trajanja moraju vratiti tvrtki Zebra na recikliranje. Informacije o nacinu vraanja proizvoda potrazite na web-stranici: http://www.zebra.com/weee.
Service Information
If you have a problem using the equipment, contact your facility’s technical or systems support. If there is a problem with the equipment, they will contact the Zebra Global Customer Support Center at: http://www.zebra.com/support.
For the latest version of this guide go to: http://www.zebra.com/support
Warranty
For the complete Zebra hardware product warranty statement, go to: http://www.zebra.com/warranty
For Australia Only:
For Australia Only. This warranty is given by Zebra Technologies Asia Pacific Pte. Ltd., 71 Robinson Road, #05-02/03, Singapore 068895, Singapore. Our goods come with guarantees that cannot be excluded under the Australia Consumer Law. You are entitled to a replacement or refund for a major failure and compensation for any other reasonably foreseeable loss or damage. You are also entitled to have the goods repaired or replaced if the goods fail to be of acceptable quality and the failure does not amount to a major failure. Zebra Technologies Corporation Australia’s limited warranty above is in addition to any rights and remedies you may have under the Australian Consumer Law. If you have any queries, please call Zebra Technologies Corporation at
+65 6858 0722. You may also visit our website: http://www.zebra.com for the most updated warranty terms.
Software Support
Zebra wants to ensure that customers have the latest release of entitled software at the time of product purchase. To confirm that your Zebra device is shipped with the latest release of entitled software, visit http://www.zebra.com/support. Check for the latest software from Software Downloads > Product Line/Product > Go.If your device does not have the latest entitled software release as of your product purchase date, please e-mail a request to Zebra at: http://www.zebra.com/support.
You must include the following essential device information with your request:
· Model number
· Serial number
· Proof of purchase · Title of the software download you are requesting.
If it is determined by Zebra that your device is entitled to the latest software release, you will receive an e-mail containing a link directing you to a Zebra Web site to download the appropriate software.
Documents / Resources
 |
ZEBRA MK3100-MK3190 Micro Interactive Kiosk [pdf] User Guide MK3100-MK3190 Micro Interactive Kiosk, MK3100-MK3190, Micro Interactive Kiosk, Interactive Kiosk, Kiosk |