ZEBRA MC3400, MC3450 Mobile Computer

Product Information

• Single-slot charge / USB cradle for charging one MC3300x / MC3300ax; MC3400 / MC3450 device and its spare battery.
• It can charge the extended-capacity battery pack (7000mAh) in 4.5 hours and fully charge the high-capacity (5200mAh) battery in about 3.5 hours.
• Includes micro-USB cable SKU# 25-124330-01R and country-specific three-wire AC cable.
• A five-slot charge-only cradle that charges up to five MC3300x / MC3300ax; MC3400 / MC3450 devices.
• Includes mounting accessory SKU# BRKT-SCRD-SMRK-01 and country-specific AC cable.
• A four-slot charge-only cradle for MC3300x / MC3300ax; MC3400 / MC3450 devices and their four spare batteries.
• Charges extended-capacity battery pack (7000mAh) in 4.5 hours and full charges of high-capacity (5200mAh) battery in about 3.5 hours.
• Includes mounting accessory SKU# BRKT-SCRD-SMRK-01 and country-specific AC cable.
• A five-slot charge / Ethernet cradle for up to five MC3300x / MC3300ax; MC3400 / MC3450 devices with network speeds of up to 1 Gbps.
• Includes mounting accessory SKU# BRKT-SCRD-SMRK-01 and country-specific AC cable.
• A four-slot charge-only cradle for MC3300x / MC3300ax; MC3400 / MC3450 devices and their four spare batteries with network speeds of up to 1 Gbps.

Product Usage Instructions

• Connect the micro-USB cable to the cradle and the power supply.
• Insert the device into the cradle for charging.
• For spare battery charging, place the spare battery in the designated slot on the cradle.
• Connect the cradle to the power supply using the provided AC cable.
• Insert the devices into the slots on the cradle for charging.
• For spare battery charging, place the batteries in the designated slots on the cradle.

Accessories that power devices

Single-slot cradles

Single-slot charge / USB cradle

• SKU# CRD-MC33-2SUCHG-01
• Single-slot USB cradle for charging one MC3300x / MC3300ax; MC3400 / MC3450 device and its spare battery.
• Allows USB communication to the device with an additional micro-USB cable.
• Supports fast-charging of the MC3400 / MC3450 device. Full charge of the extended-capacity battery pack (7000mAh) in 4.5 hours and full charge of the high-capacity (5200mAh) battery in about 3.5 hours.
• LED notification of spare battery charging status.
• Sold separately: Power Supply SKU# PWR-BGA12V50W0WW,DC cable SKU# CBL-DC-388A1-01, micro-USB cable SKU# 25-124330-01R,and country-specific three-wire AC cable (listed later in this document).

Single-slot charge / USB cradle kit
SKU# KT-CRD-MC33-2SUCHG-01

• Single-slot USB cradle kit for charging one MC3300x / MC3300ax; MC3400 / MC3450 device and its spare battery.
• Allows USB communication to the device with an additional micro-USB cable.
• Supports fast-charging of the MC3400 / MC3450 device. Full charge of the extended-capacity battery pack (7000mAh) in 4.5 hours and full charge of the high-capacity (5200mAh) battery in about 3.5 hours.
• LED notification of spare battery charging status.
• Includes: Power Supply SKU# PWR-BGA12V50W0WW,DC cable SKU# CBL-DC-388A1-01
• Sold separately: Micro-USB Cable SKU# 25-124330-01R and country-specific three-wire AC cable (listed later in this document).

Multi-slot cradles

Five-Slot Charger Cradle

• SKU# CRD-MC33-5SCHG-01
• Five-slot charge-only cradle, charges up to five MC3300x / MC3300ax; MC3400 / MC3450 devices.
• Mounting options for standard 19-inch rack systems using mounting accessory SKU# BRKT-SCRD-SMRK-01.
• Sold separately: Power Supply SKU# PWR-BGA12V108W0WW, DC cable SKU# CBL-DC-381A1-01, mounting accessory SKU# BRKT-SCRD-SMRK-01, and country-specific AC cable (listed later in this document).

Four-slot charger cradle with spare battery charging
SKU# CRD-MC33-4SC4BC-01

• Four-slot charge-only cradle for MC3300x / MC3300ax; MC3400 / MC3450 devices and their four spare batteries.
• Supports fast-charging of the MC3400 / MC3450 device. Full charge of the extended-capacity battery pack (7000mAh) in 4.5 hours and full charge of the high-capacity (5200mAh) battery in about 3.5 hours.
• Mounting options for standard 19-inch rack systems using mounting accessory SKU# BRKT-SCRD-SMRK-01.
• Sold separately: Power Supply SKU# PWR-BGA12V108W0WW, DC cable SKU# CBL-DC-381A1-01, mounting accessory SKU# BRKT-SCRD-SMRK-01, and country-specific AC cable (listed later in this document).

Five-Slot Ethernet charger cradle
SKU# CRD-MC33-5SETH-01

• Five-slot charge / Ethernet cradle for up to five MC3300x / MC3300ax; MC3400 / MC3450 devices with network speeds of up to 1 Gbps.
• Mounting options for standard 19-inch rack systems using mounting accessory SKU# BRKT-SCRD-SMRK-01.
• Sold separately: Power Supply SKU# PWR-BGA12V108W0WW, DC cable SKU# CBL-DC-381A1-01, mounting accessory SKU# BRKT-SCRD-SMRK-01, and country-specific AC cable (listed later in this document).

Multi-slot cradles

Five-Slot Ethernet charger cradle with spare battery charging

• SKU# CRD-MC33-4SE4BC-01
• Four-slot charge-only cradle for MC3300x / MC3300ax; MC3400 / MC3450 devices and their four spare batteries with network speeds of up to 1 Gbps.
• Supports fast-charging of the MC3400 / MC3450 device. Full charge of the extended-capacity battery pack (7000mAh) in 4.5 hours and full charge of the high-capacity (5200mAh) battery in about 3.5 hours.
• Mounting options for standard 19-inch rack systems using mounting accessory SKU# BRKT-SCRD-SMRK-01.
• Sold separately: Power Supply SKU# PWR-BGA12V108W0WW, DC cable SKU# CBL-DC-381A1-01, mounting accessory SKU# BRKT-SCRD-SMRK-01, and country-specific AC cable (listed later in this document).

Adapter Cup

Adapter charge-only cradle cup for legacy cradles
SKU# ADP-MC33-CRDCUP-01

• MC3400 / MC3450 adapter charge-only cradle cup for MC32 legacy cradles.
• Charges standard rate from 0-90% in about 5 hours.
• One cup is required per slot in a cradle.

Spare battery chargers

Four-slot spare battery charger
SKU# SAC-MC33-4SCHG-01

• Spare battery charger to charge four spare batteries.
• Supports fast-charging for the its high-capacity battery (5200mAh) in about 3.5 hours, and the extended-capacity battery (7000mAh) in 4.5 hours.
• Compatible with MC3300x / MC3300ax ; MC3400 / MC34500 batteries: SKU# BTRY-MC33-70MA-01, SKU# BTRY-MC33-7BLE-01, and SKU# BTRY-MC33-27MA-01.
• Mounting options for standard 19-inch rack systems using mounting accessory SKU# BRKT-SCRD-SMRK-01 for four chargers or could be used standalone.
• Sold separately: Power Supply SKU# PWR-BGA12V50W0WW,DC cable SKU# CBL-DC-388A1-01, and country-specific AC cable (listed later in this document).

20-slot spare battery charger

• SKU# SAC-MC33-20SCHG-01
• Spare battery charger to charge 20 spare batteries.
• Supports fast-charging for its high-capacity battery (5200mAh) in about 3.5 hours, and the extended-capacity battery (7000mAh) in 4.5 hours.
• Compatible with MC3300x / MC3300ax ; MC3400 / MC34500 batteries: SKU# BTRY-MC33-70MA-01, SKU# BTRY-MC33-7BLE-01, and SKU# BTRY-MC33-27MA-01.
• Mounting options for standard 19-inch rack systems using mounting accessory SKU# BRKT-SCRD-SMRK-01.
• Sold separately: Power Supply SKU# PWR-BGA12V108W0WW, DC cable SKU# CBL-DC-381A1-01, mounting accessory SKU# BRKT-SCRD-SMRK-01, and country-specific AC cable (listed later in this document).

Spare Li-ion batteries

Extended-capacity battery with PowerPrecisionPlus
SKU# BTRY-MC3X-70MA-01

• 7000mAh extended-capacity battery with PowerPrecisionPlus.
• Battery comes with improved ingress protection for MC3400/MC3450 use cases.
• Backwards compatible with MC3300ax & MC3300x models.
• Premium-grade battery cells with a longer lifecycle. Designed to meet rigorous controls, standards and help prevent overcharging.
• Obtain advanced battery state of health information, including charge level and battery age based on usage patterns.
• Also available in India -PowerPrecision+ Lithium-Ion battery pack, 7000mAh, provides advanced State of Charge and State of Health, supports fast-charge. –SKU#BTRY-MC3X-70MA-IN

Bluetooth enabled extended-capacity battery with PowerPrecisionPlus

SKU# BTRY-MC3X-7BLE-01

• 7000mAh Bluetooth extended-capacity battery with PowerPrecisionPlus.
• Battery comes with improved ingress protection for MC3400/MC3450 use cases.
• Backwards compatible with MC3300ax & MC3300x models.
• Premium-grade battery cells with longer lifecycle. Designed to meet rigorous controls, standards and help prevent overcharging.
• Obtain advanced battery state of health information, including charge level and battery age based on usage patterns.
• BLE beacon allowthe s device with this battery to be located even if powered off using Zebra Device Tracker.
• Sold separately: Zebra Device Tracker licenses for either 1-year SKU# SW-BLE-DT-SP-1YR or 3-years SKU# SW-BLE-DT-SP-3YR.
• The secondary BLE beaconing functionality is only supported through MC3300x, MC3300ax, MC3400 / MC3450 devices.
• Also available in India -PowerPrecision+ Lithium-Ion battery pack, 7000mAh, with Secondary BLE Beacon. –SKU#BTRY-MC3X-7BLE-IN.
• *Available May 2025

Additional Charging Accessories

Cigarette lighter adapter plug

SKU# CHG-AUTO-USB1-01

• USB cigarette lighter adapter plug.
• Used with USB communication / charging cable adapter SKU# CBL-MC33-USBC-01 or SKU# CBL-TC5X-USBC2A-01 to charge in-vehicle.
• Includes two USB Type A ports providing higher current (5V, 2.5A) for faster charging.
• Sold separately: USB communication / charging cable adapter SKU# CBL-MC33-USBC-01 or USB-C cable SKU# CBL-TC5X-USBC2A-01.

USB communication / charging cable

SKU# CBL-MC33-USBCHG-01

• USB charge/communications cable adapter.
• USB cable provides both USB communications and charging support with a USB-A connector.
• The cable length is 60 inches.
• Requires: To charge to a wall outlet, a power adapter SKU# PWR-WUA5V12W0XX (listed later in the document) is required or USB cigarette lighter adapter SKU# CHG-AUTO-USB1-01 for in-vehicle use.

Micro-USB to USB-A cable
SKU# 25-124330-01R

• Micro-USB to USB-A active-sync cable allows for active-sync cable.
• To use with single-slot communication cradles.
• The cable length is 48 inches.

USB-A to USB-C Communications and Charing Cable

SKU# CBL-TC5X-USBC2A-01

• USB-A to USB-C communications and charging cable.
• For charging and communication directly with MC3400 / MC3450 devices.
• Use with USB power adapter SKU#PWR-WUA5V12W0US for charging with AC wall outlet.
• Use USB cigarette lighter adapter SKU# CHG-AUTOUSB1-01 for in-vehicle charging.

Power supply, cables, and adaptors

Country-specific AC line cords: grounded, 3-prong

Country-specific AC line cords: ungrounded, 2-prong

Accessories that enable productivity solutions

Mounting and Headset

Unpowered forklift mount
SKU# MNT-MC33-FLCH-01

• Includes an un-powered forklift mount that allows installing the device on a roll bar or square surface of a forklift.
• Sold separately: RAM double socket arm for 1-inch ball SKU# MNT-RAM-B201U,RAM forklift clamp 2.5-inch max width square rail base with 1-inch ball SKU# MNT-RAM-B247U25.

RAM mount arm
SKU# MNT-RAM-B201U

• RAM double socket arm for 1-inch ball.
• Used with un-powered forklift mount SKU# MNT-MC33-FLCH-01
• Uses RAM mount P/N SKU# RAM-B-201U

RAM mount base
SKU# MNT-RAM-B247U25

• RAM forklift clamp 2.5-inch max width square rail base with 1 inch ball
• Used with an un-powered forklift mount SKU# MNT-MC33-FLCH-01 and attaches to the square-shaped post of the forklift.
• Uses RAM mount P/N SKU# RAM-B-201U

Rack mounting for space optimization

• SKU# BRKT-SCRD-SMRK-01 / wall mounting bracket allows to install the 20-slot battery charger, multi-slot terminal cradles or up to four 4-slot battery chargers on a wall or a 19” server rack.

Rugged wireless headset with over-the-head headband SKU# HS3100-OTH

• HS3100 Rugged Bluetooth headset with over-the-head headband. Included HS3100 boom module and HSX100 OTH headband module

Rugged wireless headset with behind-the-neck headband (left). SKU# HS3100-BTN-L

• HS3100 Rugged Bluetooth headset with behind-the-neck headband (left).

Styluses

Fiber-tipped stylus
SKU# SG-STYLUS-TCX-MTL-03

• Set of three fiber-tipped stylus.
• Heavy-duty and made from stainless steel/brass. No plastic parts —real pen feel. Can be used in rain.
• Micro-knit, hybrid-mesh, fiber tip provides silent, smooth gliding use. 5″ length.
• Big improvement over a rubber rubber-tipped or plastic-tipped stylus.
• Compatible with all capacitive touch screen devices.
• Tether to the device or hand strap using SKU# SG-TC5NGTC7NG-TETHR-03.
• Capacitive stylus with coiled tether
• SKU# SG-TC7X-STYLUS-03
• Set of three capacitive styluses with coiled tether.
• Includes: Capacitive stylus SKU# SG-TC7X-STYLUS-03 and coiled tether SKU# KT-TC7X-TETHR1-03.
• Also available as a 6-pack —6 styluses and 6 coiled tethers—SKU#SG-TC7X-STYLUS-06.
• Please note this accessory is a consumable and may require replacement during the device’s lifespan.

Capacitive stylus

• SKU# SG-TC7X-STYLUS1-03
• Set of three capacitive styluses optimized for enterprise durability.
• Made of conductive carbon-filled plastic material with 5mm tip. 3.5” length.
• Can be stored in loop of hand strap.
• Sold separately: Hand strap SKU# SG-MC33-HDSTPG-01 and holster SKU# SG-MC3X-SHLSTB-01
• Also available as a 50-pack of 50 styluses—SKU#SG-TC5X-STYLUS-50.

Please note this accessory is a consumable and may require replacement during the device’s lifespan.

Capacitive stylus with coiled tether
SKU# SG-TC7X-STYLUS-03

• Set of three capacitive styluses with coiled tether.
• Includes: Capacitive stylus SKU# SG-TC7X-STYLUS-03 and coiled tether SKU# KT-TC7X-TETHR1-03.
• Also available as a 6-pack —6 styluses and 6 coiled tethers—SKU#SG-TC7X-STYLUS-06.

Please note this accessory is a consumable and may require replacement during the device’s lifespan.

Accessories that protect devices

Hand straps, shoulder strap, belt, and screen protector

• Replacement gun hand strap
• SKU# SG-MC33-HDSTPG-01 Replacement gun hand strap.
• Please note this accessory is a consumable and may require replacement during the device’s lifespan.

Replacement straight shooter strap

• SKU# SG-MC34-HDSTPB-01
• Replacement straight shooter hand strap.
• Available May 2025

Please note this accessory is a consumable and may require replacement during the device’s lifespan.

Shoulder strap

• SKU# 58-40000-007R
• Universal shoulder strap for fabric holster.
• Extends from 22 to 55 inches and is 1.5 inches wide.

Please note this accessory is a consumable and may require replacement during the device’s lifespan.

Belt for holster

• SKU# 11-08062-02R
• Universal belt for fabric holster.
• Extends 48 inches and is 2 inches wide.

Please note this accessory is a consumable and may require replacement during the device’s lifespan.

Glass screen protector

• SKU# MISC-MC34-SCRN-01
• Set of five tempered glass screen protectors.
• The kit includes screen protectors (Qty 5), wiping cloth (Qty 1), alcohol wipes (Qty 2) and installation instructions

Please note this accessory is a consumable and may require replacement during the device’s lifespan.

Fabric holsters

Fabric holster for straight shooter

• SKU# SG-MC3X-SHLSTB-01
• Fabric holster, secures to a belt or a shoulder strap for brick/straight shooter.
• Includes: Shoulder strap SKU# 58-40000-007R.

Please note this accessory is a consumable and may require replacement during the device’s lifespan.

Fabric holster for gun configuration

• SKU# SG-MC3021212-01R
• Fabric holster for gun configurations, secures to a belt or a shoulder strap. Allows carrying the gun device on the hip or cross-body.
• Compatible with devices with or without a rubber boot.
• Sold separately: Shoulder strap SKU# 58-40000-007R or belt SKU# 11-08062-02R.

Please note this accessory is a consumable and may require replacement during the device’s lifespan.

Rigid holster for straight shooter
SKU# SG-MC34-RDHLST-01

• Rigid holster for straight shooter configurations, secures to a belt.
• Sold separately: Belt SKU# 11-08062-02R.
• *Available May 2025

Please note this accessory is a consumable and may require replacement during the device’s lifespan.

Rubber boots

Rubber boot for gun unit

• SKU# SG-MC34-RBTG-01
• Rubber boot for MC3400 / MC3450 for gun terminal only.
• Compatible with fabric holsters: SKU# SG-MC3021212-01R.
• The rubber boot can be bent up to allow the insertion of the terminal into the charge cradle.

Please note that this accessory is a consumable and may require replacement during the device’s lifespan.

Rubber boot for straight shooter unit

• SKU# SG-MC34-RBTS-01
• Rubber boot for MC3400 / MC3450 for straight shooter terminal only.
• The rubber boot can be bent up to allow the insertion of the terminal into the charge cradle.
• Available May 2025

Please note that this accessory is a consumable and may require replacement during the device’s lifespan.

Stylus tethers

• SKU# SG-TC5NGTC7NG-TETHR-03
• Stylus tether –pack of 3.
• Can be attached to the device tower bar.
• When a hand strap is used, the tether should attach to hand strap SKU# SG-NGTC5TC7-HDSTP-03 directly (not to terminal towel bar).
• The string-type tether prevents loss of the stylus.

Please note this accessory is a consumable and may require replacement during the device’s lifespan.

Stylus coiled tether replacement

• SKU#KT-TC7X-TETHR1-03
• Set of three coiled tethers for stylus to replace previously lost or damaged tethers.
• Not recommended when using fiber-tipped stylus SKU# SG-STYLUS-TCX-MTL-03

Please note that this accessory is a consumable and may require replacement during the device’s lifespan.

Stylus coiled tether replacement

• SKU#SG-ET5X-SLTETR-01
• Coiled tether for stylus to replace previously lost or damaged tethers.
• Not recommended when using fiber-tipped stylus SKU# SG-STYLUS-TCX-MTL-03

Please note that this accessory is a consumable and may require replacement during the device’s lifespan.

FAQ

• Q: How long does it take to charge the extended-capacity battery pack?
  • A: The extended-capacity battery pack (7000mAh) charges in approximately 4.5 hours.
• Q: Can I use any micro-USB cable with the single-slot cradle?
  • A: It is recommended to use the provided micro-USB cable for optimal performance.

Documents / Resources

ZEBRA MC3400, MC3450 Mobile Computer [pdf] User Guide MC3401 0S1R63SS A6, CRD-MC33-2SUCHG-01, KT-CRD-MC33-2SUCHG-01, CRD-MC33-5SCHG-01, CRD-MC33-4SC4BC-01, MC3400 MC3450 Mobile Computer, MC3400 MC3450, Mobile Computer, Computer

References

• User Manual