ZEBRA MC17 Personal Shopper Mobile Computer Instruction Manual

ZEBRA MC17 Personal Shopper Mobile Computer - front page

INTRODUCTION

This AirBEAM package contains an OSUpdate package containing a complete set of Hex Images from MC17xxc50Ben software release. After installing this package all device partitions will be updated. Users are advised to copy any valuable data or files they wish to save from the device to a separate location before performing this update as all data will be erased once the update occurs.

Warning: Users are recommended to install this package prior to installing other application software that may reside in RAM since that software will be erased when the Hard Reset occurs.

DESCRIPTION

General Enhancements in 05.35.22
ReBranded Components:

  1. Fusion Software 3.00.2.0.041R(FCC Compliant)
  2. Airbeam v07.03.46
  3. Pocket Browser v3.0
  4. AppLauncher
  5. Splash Screen
  6. ScanSamp2 Application v4.3.0.0
  7. Debug Tools(eMscript,CaptureDump) integrated

NOTE: The device needs to be rebooted manually after installing the Capture Dump cab file

CONTENTS

The “17xxc50BenAB053522.apf” file contains an AirBeam OSUpdate package which will contain the following MC17xxc50Ben file partitions:

  • 17xxc50BenAP013.bgz
  • 17xxc50BenOS053522.bgz
  • 17xxc50BenPL016.bgz
  • 17xxc50BenPM634403.bin
  • 17xxc50BenPT001.hex
  • 17xxc50BenSC001.hex
  • 17xxc50XenMO0157XX.hex

DEVICE COMPATIBILITY

This software release has been approved for use with both the “Touch” and “Non- Touch” versions of the following Symbol devices.

ZEBRA MC17 Personal Shopper Mobile Computer - DEVICE COMPATIBILITY

INSTALLATION INSTRUCTIONS

Installation Prerequisites:
· MC17xxc50B Windows CE 5.0 terminal
· AirBEAM Package Builder 2.11 or later OR MSP 3.x Server

Installation Steps:

i) Airbeam update Package:

  • Upload this AirBEAM package “17xxc50BenAB053522.apf” on to server.
  • Download the package to the MC17xxc50B device using RD, AirBEAM client or MSP tools (see instructions on each tool for details).

ii) OSUpdate Package:

  • Unzip the 17xxc50BenUP053522.zip and copy the OSUpdate folder to device \Storage Card or \Temp folder using Active Sync.
  • Click 17xxc50BenColor_SD.lnk from \Storage Card folder or 17xxc50BenColor_Temp.lnk from \Temp folder to start the update process.
  • The update will take approximately 510 minutes

PART NUMBER AND RELEASE DATE

17xxc50BenAB053522

17xxc50BenUP053522
December 16, 2015

ZEBRA and the stylized Zebra head are trademarks of Zebra Technologies Corp., registered in many jurisdictions worldwide. All other trademarks are the property of their respective owners. ©2023 Zebra Technologies Corp. and/or its affiliates.

Documents / Resources

ZEBRA MC17 Personal Shopper Mobile Computer [pdf] Instruction Manual
MC17, MC17 Personal Shopper Mobile Computer, Personal Shopper Mobile Computer, Shopper Mobile Computer, Mobile Computer, Computer

References

Leave a comment

Your email address will not be published. Required fields are marked *