ZEBRA MC17 Handheld Computer
MC17 OPERATING SYSTEM BSP 04.35.14 RELEASE NOTES
INTRODUCTION
- This AirBEAM package contains an OSUpdate package containing a complete set of Hex Images from the MC17xxc50Ben software release.
- After installing this package all device partitions will be updated. Users are advised to copy any valuable data or files they wish to save from the device to a separate location before performing this update as all data will be erased once the update occurs.
Warning: Users are recommended to install this package before installing other application software that may reside in RAM since that software will be erased when the Hard Reset occurs.
DESCRIPTION
- CMI (Chimei) Display Support Added
- OEM Version 04.35.14
- Monitor v01.57.258
- Power Micro v63.44.03
- Application v12
- Platform v15.
- SPR 22644: MAC address is shown in PB Sample but not in Device Info after a hard reset
- SPR 23078: Long Charging time seen in MC17T/MC17A
- SPR 23361: MC17T reporting 222 (battery level) when high CPU Load
- Default Successful Scan LED On time is reduced to 2 seconds
CONTENTS
The “17xxc50BenAB043514.apf” file contains an AirBeam OSUpdate package which will contain the following MC17xxc50Ben file partitions:
- 17xxc50BenAP012.bgz
- 17xxc50BenOS043514.bgz
- 17xxc50BenPL015.bgz
- 17xxc50BenPM634403.bin
- 17xxc50BenPT001.hex
- 17xxc50BenSC001.hex
- 17xxc50XenMO0157XX.hex
DEVICE COMPATIBILITY
- This software release has been approved for use with both the “Touch” and “Non-
- Touch” versions of the following Symbol devices.
| Device | Operating System |
| MC17xxc50B | Windows CE 5.0 |
INSTALLATION INSTRUCTIONS
Installation Prerequisites
- MC17xxc50B Windows CE 5.0 terminal
- AirBEAM Package Builder 2.11 or later OR MSP 3. x Server Installation Steps:
Airbeam update Package
- Upload this AirBEAM package “17xxc50BenAB043514.apf” onto the server.
- Download the package to the MC17xxc50B device using RD, AirBEAM client, or MSP tools (see instructions on each tool for details).
OSUpdate Package
- Unzip the 17xxc50BenUP043514.zip and copy the OSUpdate folder to the device \Storage Card or \Temp folder using Active Sync.
- Click 17xxc50BenColor_SD.lnk from \Storage Card folder or 17xxc50BenColor_Temp.lnk from \Temp folder to start the update process.
- The update will take approximately 510 minutes
PART NUMBER AND RELEASE DATE
- 17xxc50BenAB043514
- 17xxc50BenUP043514
- January 30, 2013
ZEBRA and the stylized Zebra head are trademarks of Zebra Technologies Corp., registered in many jurisdictions worldwide. All other trademarks are the property of their respective owners. ©2023 Zebra Technologies Corp. and/or its affiliates.
Documents / Resources
 |
ZEBRA MC17 Handheld Computer [pdf] Instructions MC17 Handheld Computer, MC17, Handheld Computer, Computer |