ET60 and ET65
Accessories Guide
The most versatile rugged Android business tablets
Accessories that power devices
Vehicle Docks
Vehicle Dock Charging, 2 x USB Type A, 1 x RS232 SKU# CRD-ET6X-VEHDK-CON-01
- Small design, Quick release, VESA mount pattern
- IP66, Extreme shock, vibration and thermal shock testing – built to survive constant pounding
- Heated pogo pins to avoid corrosion and loss of connection
- 2 USB Type A ports and one serial port to connect peripherals
- All ports are securely covered in a compartment
- Allows locking the ET6x
SKU# CRD-ET6X-VEHDK-PTA-01
- Small design, Quick release, VESA mount pattern
- IP66, Extreme shock, vibration and thermal shock testing – built to survive constant pounding
- Heated pogo pins to avoid corrosion and loss of connection
- 3 antenna passthroughs for strong GPS and wireless signals
- 2 USB Type A ports and one serial port to connect peripherals
- All ports are securely covered in a compartment
- Allows locking the ET6x
Vehicle Power Supplies and Cables
 |
DC/DC Power Supplies 9-60 VDC: SKU# 450083 50-150 VDC: SKU# 450084 • To be installed between the vehicle dock and the vehicle battery • Isolated • Check the voltage of the vehicle before selecting the variant |
 |
Cigarette Lighter Adapter (CLA) to Vehicle Dock SKU# 450143 • Power the Vehicle Dock from a 12V cigarette lighter • To be installed between the vehicle dock and the cigarette lighter |
 |
Direct Wire Kit SKU# 300039 • To connect the DC/DC power supply with the Vehicle Dock |
 |
DC Power Adapter to VC DC Power Cable with CPC Connector SKU# CBL-ET-ADPA1-1 • Replace a legacy Zebra VC and reuse the existing DC power cable • To be installed between the existing DC power cable and the DC/DC power supply |
 |
DC Power Adapter to legacy LXE VC DC Power Cable SKU# ACC-PWRCBL01 • Replace a legacy LXE/Honeywell VC and reuse the existing DC power cable • To be installed between the existing DC power cable and the DC/DC power supply |
 |
AC/DC Power Supply SKU# 450020 • 100-240 VAC in, 14 VDC out • To power the vehicle dock from a regular 110/220 VAC outlet Please order AC cable separate: • 450040 (for US) • 450047 (for Australia/New Zealand) • 450042 (for EU) • 450041 (for UK) • ACC-L10LINECORD-TW (for Taiwan) • ACC-L10LINECORD-JP (for Japan) • ACC-L10LINECORD-CN (for China) |
Vehicle Mounts
The Vehicle Docks have the VESA mount pattern and can be used with a range of 3rd party mounts.
| MT4301 | RAM mount, 4″ arm |  |
| MT4302 | RAM MOUNT, 8.5″ ARM (12″ arm length with two plates attached) |  |
| MT3501 | VESA plate (for 4″ or 12″ RAM arm) |  |
| MT3502 | Round plate (for 4″ or 12″ RAM arm) |  |
| MT3505 | Clamp base (for 4″ or 12″ RAM arm), 2″ max. width |  |
| MT3507 | Clamp base (for 4″ or 12″ RAM arm), 3″ max. width | |
| RAM-D-247U-4 | Mount, RAM, Square Post Clamp Base for Posts up to 4″ Wide, D-size ball |  |
| MT3509 | Rail base (for 4″ or 12″ RAM arm), 1-1/4″ to 1-7/8″ |  |
| MT3510 | Rail base (for 4″ or 12″ RAM arm), 2″ to 2 1/2″ | |
| 350025 | MOUNT, L10/ET8X, RAM FORKLIFT MOUNTING KIT |  |
| STND-ET-DESK-01 | Desk Stand for Vehicle Dock |  |
Accessories that power devices
Warehouse Keyboard for Vehicles
Warehouse Keyboard
- Alphanumeric
- 12 direct Function keys
- Field replaceable elastomer and cable
- IP66, -30 to +50 C, condensing environments
- Dimmable backlight
- Controller chip with build-in temperature compensation
- Heated board and drainage system for condensing environments
- AMPS mounting holes pattern
| KYBD-QW-VC-01 | VC USB Keyboard QWERTY | |
| KYBD-QW-AZ-01 | VC USB Keyboard AZERTY | |
| KYBD-QW-ET-S-1 | VC USB Keyboard QWERTY with USB Type A Cable |  |
| CBL-ET-KBUSB1-01 | USB Type A Cable for Warehouse Keyboard |  |
| CBL-ET-KBUSB2-01 | USB & RS232 Y-Cable for Warehouse Keyboard (to power heaters) | |
| KT-KYBDTRAY-ET6X-01 | ET6x Keyboard Tray for Vehicle Dock, VESA & AMPS Mounting Hole Pattern |  |
Accessories that power devices
AC/DC Power Supply
AC/DC Power Supply
SKU# PWR-BGA15V45W-UC2-WW
- 100-240 VAC in, 14 VDC out
- To power the tablet from a regular 110/220 VAC outlet
Please order AC cable separate:
- 450040 (for US)
- 450047 (for Australia/New Zealand)
- 450042 (for EU)
- 450041 (for UK)
- ACC-L10LINECORD-TW (for Taiwan)
- ACC-L10LINECORD-JP (for Japan)
- ACC-L10LINECORD-CN (for China)
Batteries
 |
Standard Battery SKU# BTRY-ET6XA-9AH-01 • ET6x Android Standard Battery, 9.3 Ah • Zebra’s PowerPrecision+ batteries provide the intelligence to better manage a battery pool. • Obtain advanced battery state of health information including charge level and battery age based on usage patterns. |
 |
Extended Battery SKU# BTRY-ET6XA-18AH-01 • ET6x Android Extended Battery, 18.7 Ah • Zebra’s PowerPrecision+ batteries provide the intelligence to better manage a battery pool. • Obtain advanced battery state of health information including charge level and battery age based on usage patterns. |
 |
No Cells Battery SKU# BTRY-ET6X-0AH-01 • Battery housing without cells • Cost saving and elimination of battery maintenance in fixed mount installations |
Accessories that enable productivity solutions
Stylus
 |
Active Stylus SKU# SG-ET8X-STYLUS1-01 • Allows for a large range of pressure sensitivity, tilt detection and hover capability. • IP55 water and dust protected. • Two side buttons for easy erase and menu access. • Can be tethered to tablet with SG-ET5X-SLTETR-01 (sold separately). • Can be secured to tablet with Pen Loop Holder (SG-ET8X-PENLOOP1-01) or inserted into handle SG-ET8X-HANDLE1-01 (sold separately). • Uses one AAAA battery, included. |
 |
Stylus Holder SKU# SG-ET8X-PENLOOP1-01 • Adhesive Loop attaches to rear of tablet |
 |
Coiled Tether SKU# SG-ET5X-SLTETR-01 • Used to tether stylus to the tablet. • Can be attached to tether points on device corners |
 |
Passive Stylus SKU# SG-STYLUS-TCX-MTL-03 Fiber tipped stylus – pack of 3 • Heavy-duty and made from stainless steel / brass. No plastic parts — real pen feel. • Micro-knit, hybrid-mesh, fiber tip provides silent, smooth gliding use. • Length of stylus is 5″. • Tether to device or hand strap using SKU# SG-TC5NGTC7NG-TETHR-03. |
 |
Passive Stylus Tether SKU# SG-TC5NGTC7NG-TETHR-03 • Can be attached to tether points on device corners • String type tether prevents loss of stylus. |
 |
Small Passive Stylus Kit With Tether SKU# SG-TC7X-STYLUS-03 Pack of 3 • Conductive Carbon-filled plastic material w/ 5mm tip • Length of stylus is 3.5″. • Rigid plastic stylus is optimized for enterprise durability. • Clip & tether point to reduce loss. • Tether to the ET6X using the attachment points on the top right or top left sides of tablet. |
Straps and Stand
  |
Kickstand with Hand Strap SKU# XBK-ET6X-KCKSTD-01 • Easy to use while walking • Adjustable to hand size • Detents help lock desired rotation angle • Kickstand provides great ergonomics for reading and touch screen interactions while the tablet is on flat surfaces • User adjustable display angle |
 |
Replacement Hand Strap for Kickstand SKU# SG-ET5X-RHTP1-01 • Spare/Replacement hand strap |
 |
Carry Handle SKU# SG-ET8X-HANDLE1-01 • Comes with Stylus Slot and Coiled Stylus Tether • Requires Attachment Clips (SG-ET6X-DCLIPS-01) |
 |
Shoulder Strap SKU# SG-ET8X-SHLDR1-01 • Adjustable length • Requires Attachment Clips (SG-ET6X-DCLIPS-01) |
 |
Attachment Clips for Straps SKU# SG-ET6X-DCLIPS-01 • Attach to keyboard latch points on tablet |
ET60 and ET65 Accessories Guide
Documents / Resources
 |
ZEBRA ET65 Most Versatile Rugged Android Business Tablets [pdf] User Guide ET65 Most Versatile Rugged Android Business Tablets, ET65, Most Versatile Rugged Android Business Tablets, Rugged Android Business Tablets, Android Business Tablets, Business Tablets |