A8 True Wireless Earbuds
“
Specifications
- Model: A8
- Instruction manual version: A8
- Product dimensions: 10/2/2S
Product Operation Instruction
To turn the product on, press any function key for 3 seconds. To
turn it off, long press the left or right function key for 2
seconds. To pause or play, click the left function key. To skip to
the next track, triple-click the right function key. To go back to
the previous track, triple-click the left function key.
To adjust volume, double-click the left or right function key.
To activate the voice assistant, long press the left or right
function key for 2 seconds. Answer or reject a call by clicking any
function key, and hang up by long pressing the left or right
function key for 2 seconds.
Touch Function
The touch function on this product allows you to control various
operations like play/pause, track skipping, volume adjustment, call
handling, and activating voice assistant through specific touch
gestures on the function keys.
Matters Needing Attention
Ensure to clean the earphone and charging bin’s thimble
regularly with cotton swabs or a rag to prevent dirt accumulation
and ensure proper charging contacts. Charge the earphones at least
once every three months to maintain battery health.
Avoid exposing the earphones to high temperatures or direct
sunlight. Disconnect all connections or cables from other devices
before entering Bluetooth pairing mode.
FAQ
Q: How do I know if the earphones are fully charged?
A: When the earphones are charging, the white light of the
earphone will be steady on. Once fully charged, all lights will be
off.
Q: How do I enter Bluetooth pairing mode?
A: Long press both left and right function keys for 2 seconds to
enter Bluetooth pairing mode. The device will indicate pairing mode
by flashing lights on the main and secondary ears.
Q: How often should I clean the thimbles of the earphone and
charging bin?
A: It is recommended to clean the thimbles regularly with cotton
swabs or a rag to prevent dirt accumulation and ensure proper
charging contact.
“`
A8 A8 Instruction manual
· V5.3+BR+EDR · A2DPAVCTPAVDTP AVRCPHFPHID · 10m · SBC · Type-C · DC5V 0.2A · DC5V 0.2A
/ · · 3 · · 5S · 5
· 70%4
10
· 3
· “A8”
· 1
·
· 1.5
·
/
/
2/
/
2S
· · · · ·
·
· Type-C
·
· L/R10
·
Product parameter
· Bluetooth version: V5.3+BR+EDR · Support protocol: A2DPAVCTPAVDTP AVRCPHFPHID · Transmission distance: > 10m · Audio coding: SBC · Charging port: Type-C · input voltage current: DC5V 0.2 A Current, output voltage: DC5V 0.2 A · Playback time: about 4 hours for a single playback of 70% volume, about 10 hours with a charging case · Call duration: > 3 hours · Charging time: about 1 hour · Power box charging: about 1.5 hours
Product operation instruction
Touch function
Matters needing attention
·The earphone and charging bin are used for about a week. Clean the
On/off
Pause/Play
Click the left and right function keys
earphone and charging bin’s thimble with cotton swabs or rag to
· Open the charging case and take out the earphones, which will turn
Next track
Triple the right function key
prevent dirt on the thimble and avoid bad charging contact
on automatically
Previous piece
Triple the left function key
· When not in use, please put the earphones back in the charging case
· The earphone is off outside the box. Long press the function button Volume up
Double-click the right function key
to prevent loss and timely charge the earphones.
for 3 seconds to turn it on
Volume down
Double-click the left function key
· Before cleaning and maintenance, stop using the device, shut down
· Put it in the charging case and turn it off
Voice assistant
Long press left/right for 2 seconds
all applications, and disconnect all connections or cables from other
· Press and hold for 5S to power off
Answer a call
Click any function
devices.
· Disconnected devices automatically shut down after 5 minutes
Hang up
Long press left/right for 2 seconds
· Use a clean, dry, soft cloth to wipe the device or its accessories.
Bluetooth connection
Reject a call
Long press left/right for 2 seconds
· If the product with lithium battery is not used for a long time, make
· Turn on your device’s Bluetooth, search for “A8” and select Connect
Cancel dialing
Click any function key
sure to charge it at least once every three months
·When the device is turned on for the first time, it will automatically Note: When using in one ear, double-click to add volume; Three clicks · Keep the device and its accessories dry. Do not use external heating
enter the Bluetooth pairing state. The white and ice blue lights on the for the next song
devices such as microwave ovens or hair dryers to dry them.
main ear will flicker alternately, and the secondary ear lights will be off charge
· When the device is turned on again, the headset will automatically
· Do not place the device or its accessories in an area where the temperature is too high or too low. Otherwise, the device may fail,
connect back to the last device. If the connection fails, the headset will · When the Type-C data cable is inserted into the charging port, the catch fire, or explode.
automatically enter the pairing mode
digital tube flashes at the end and lights up after full charge
· Do not use strong chemicals, cleaning agents, or strong detergents to
· When charging the earphone, the L/R corresponding to the charging clean the equipment or its accessories.
case will be long on and off after 10 seconds of full charge. When the
earphone is charging, the white light of the earphone will be steady on.
When the earphone is fully charged, all lights will be off
FCC Statement Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: –Reorient or relocate the receiving antenna. –Increase the separation between the equipment and receiver. –Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. –Consult the dealer or an experienced radio/TV technician for help. This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:(1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. The device has evaluated to meet general RF exposure requirement. The device can be used be in portable exposure without restriction.
Documents / Resources
 |
Zebra Network A8 True Wireless Earbuds [pdf] Instruction Manual 2A5N2-A8, 2A5N2A8, A8 True Wireless Earbuds, A8, True Wireless Earbuds, Wireless Earbuds, Earbuds |