Z48-2100-1C Response Linq Router
“
Product Specifications
- Model: Z48-2100-1C
- Version: V1.0
Product Information
Product Features:
- MT7620A solution with a MIPS24KEc architecture CPU
- Maximum clock speed: 580 MHz
- 2.4G WIFI functionality with a speed of up to 300Mbps
- 128MB DDR2 RAM and 16MB Nor Flash
- 1 WAN and 4 LAN ports with 100M adaptive network ports
- Supports USB 2.0 and TF card storage interface for network
storage functions - One-click factory reset mode for easy reset
- External standard SIM card interface supporting SIM/USIM
cards - External high-gain omnidirectional antenna for 360-degree
wireless signal coverage
Hardware Functions:
- Net Port, USB Interface, TF card Interface, SIM card
Interface - Power Port, Key Antenna, PCIe Port, WAN port, 4 LAN ports
- Reset button, Full-direction 5dbi 2.4G antenna – 2 units
- Built-in mini-PCIe interface supporting USB 2.0 bus
Product Usage Instructions
Connection:
- Connect the WAN port to your modem using an Ethernet
cable. - Connect your devices to the LAN ports using Ethernet cables for
wired connection. - Power on the device using the DC 5.0 * 2.1mm interface.
Configuration:
- Access the device settings through a web browser using the
default IP address. - Set up wireless network SSID, password, and security
settings. - Configure additional features like USB storage and SIM card
settings.
Reset:
To perform a factory reset, press and hold the reset button
while powering on the device.
Frequently Asked Questions (FAQ)
Q: How do I update the firmware of the device?
A: To update the firmware, download the latest firmware file
from the manufacturer’s website and follow the instructions
provided in the user manual.
Q: Can I use this device with a VPN connection?
A: Yes, you can configure VPN settings in the device to
establish a VPN connection.
“`
Shenzhen Zhibotong Electronics Co., Ltd
Product ModelZ48-2100-1C VersionsV1.0
1 10
Shenzhen Zhibotong Electronics Co., Ltd Catalogue
1 Review …………………………………………………………………………………………………………………………… 3 1.1 brief overview ………………………………………………………………………………………………………..3 1.2 Reference standard ………………………………………………………………………………………………….3
2 Product Picture …………………………………………………………………………………………………………………4 3 Product Feature ……………………………………………………………………………………………………………….. 5 4 Hardware functions …………………………………………………………………………………………………………..6
4.1 hardware interface …………………………………………………………………………………………………. 6 4.2 Introduction to Indicator Light Function ……………………………………………………………………6 4.3 Introduction to the Hardware Platform …………………………………………………………………….. 7 5 Other characteristics ………………………………………………………………………………………………………… 7 6 Power Supply and Power Consumption Explanation …………………………………………………………… 7 7 Introduction to WIFI Wireless Parameters ………………………………………………………………………….. 8 8 Introduction to Structural Parameters and Accessories ………………………………………………………….8 9 Product operating environment requirements ……………………………………………………………………… 9 10 Software configuration information …………………………………………………………………………………. 9 11 FCC Warning ………………………………………………………………………………………………………………… 9
2 10
1.Review
Shenzhen Zhibotong Electronics Co., Ltd
1.1 Brief overview
This document describes the electrical characteristics, RF performance, dimensions and application environment of the WE826-T2. Under the introduction of this document, end users or developers can quickly understand the hardware functions of the WE826-T2.
1.2 Reference standard
Standard Specification:
USB 2.0 bus standard TF Card interface standard SIM/USIM interface standard IEEE802.11n/g/b IEEE802.3/802.3u Mini PCI Express Card Electro mechanical Specification Revision
1.0-2003
3 10
Shenzhen Zhibotong Electronics Co., Ltd 2 Product Picture
4 10
Shenzhen Zhibotong Electronics Co., Ltd 3 Product Feature
Using the MT7620A solution, with a MIPS24KEc architecture CPU and a maximum clock speed of 580 MHz.
The MT7620A chip integrates 2.4G WIFI functionality with a speed of up to 300Mbps.
Using high-speed 128MB DDR2, combined with 16MB Nor Flash 1 WAN and 4 LAN with 100M adaptive network ports, supporting
automatic switching (Auto MDI/MDIX) Supports USB 2.0 and TF card storage interface, which can be used
to expand the SMABA or FTP network storage functions. Support “one-click factory reset mode”, that is, by long-pressing
the reset button and then powering on, you can enter the rescue factory reset mode. External standard SIM card interface, supporting SIM/USIM cards
External high-gain omnidirectional antenna, with wireless signal coverage providing 360-degree without any blind spots.
5 10
Shenzhen Zhibotong Electronics Co., Ltd 4 Hardware functions
4.1 hardware interface
Net Port
USB Interface TF card Interface SIM card Interface
Power Port
Key Antenna
PCIe Port
WAN port 1, supports 100Mbps with automatic switching (Auto MDI/MDIX) Complies with IEEE 802.3/802.3u 4 LAN ports, supporting automatic switching (Auto MDI/MDIX) at 100Mbps Compliant with IEEE 802.3/802.3u 1 USB 2.0 interface
Standard TF card interface: 1 piece
Standard SIM card (large card) interface 1, supporting SIM/USIM
DC 5.0 * 2.1mm interface
Reset button 1 piece
Full-direction 5dbi 2.4G antenna – 2 units
Built-in mini-PCIe interface, supporting USB 2.0 bus
4.2 Introduction to Indicator Light Function
LAN1 LED LAN2 LED LAN3 LED LAN4 LED WAN LED
2.4G WIFI LED
The network port remains constantly lit when connected, and it flashes when there is data communication. The network port remains constantly lit when connected, and it flashes when there is data communication. The network port remains constantly lit when connected, and it flashes when there is data communication. The network port remains constantly lit when connected, and it flashes when there is data communication. The network port remains constantly lit when connected, and it flashes when there is data communication. The 2.4G WIFI function indicator lights up constantly when the function is enabled. It flashes when there is data communication. It does not light up when the 2.4G WIFI or the 2.4G WIFI function is not enabled or when there is a malfunction in the 2.4G WIFI function.
6 10
Power LED
Shenzhen Zhibotong Electronics Co., Ltd
It lights up when the power is connected, and does not light up when there is a power failure or when the power is not connected.
4.3 Introduction to the Hardware Platform
Processor 2.4G WIFI Chip Internal Storage
MT7620A, a MIPS24KEc architecture CPU with a maximum clock speed of 580 MHz. MT7620A integrates 2.4G WIFI function IEEE 802.11n/g/b, with the maximum speed of 300Mbps
DDR2 128MB
Internal Storage Nor Flash 16MB Does not support NAND Flash
5.Other characteristics
(SIM Card Detection (Optional)) Power supply voltage: 3.4~4.5V, typical 3.8V Operating temperature: -35 to +75 degrees Celsius
6 Power Supply and Power Consumption Explanation
Test Condition
Least value
Rated value
Maximum
Unit
operating voltage
T A = 25°C
6
12
14
V
Absolute
working
T A = 25°C
5.5
16
V
voltage
operating current
VIN=12VT A = 25°C 0.3
0.5
0.8
A
Please use the power adapter provided with ZBT to supply power to this
product. If you do not use the power adapter provided by ZBT, please supply power to
this product strictly in accordance with the above power specification parameters.
Otherwise, the product may be damaged. If you use batteries or a vehicle power
supply, please definitely take measures to prevent static electricity and surges.
7 10
Shenzhen Zhibotong Electronics Co., Ltd 7 Introduction to WIFI Wireless Parameters
Compatible with IEEE 802.11 b/g/n, supports IEEE 802.11 d/h/k; supports 20MHz, 40MHz, adopts 2T2R MIMO antenna technology, with the maximum connection rate reaching up to 300Mbps. The following are the explanations of the operating frequency, receiving sensitivity and transmitting power of 2.4G WIFI.
Explain
maximum
rated value
least value
Unit
Operating Frequency
2484
2412
MHz
11 Mbps CCK
-86
Receive
54 Mbps OFDM
-72
Sensitivity
BW=20MHz MCS 7
-70
BW=40MHz MCS 7
-68
11 Mbps CCK
19
Transmitted 54 Mbps OFDM
17
Power
BW=20MHz MCS 7
17
BW=40MHz MCS 7
16
-87.5
-89
dBm
-74
-76
dBm
-72
-74
dBm
-70
-71
dBm
18
17
dBm
16
15
dBm
16
15
dBm
15
14
dBm
8 Introduction to Structural Parameters and Accessories
Weight KG Case Size
0.54KG L*W*H=109MM*83MM*29MM
Blendent
black
Accessories
Power adapter 12V/1A 1PCS specification
1PCS
8 10
Shenzhen Zhibotong Electronics Co., Ltd
certificate
1PCS
reticle
1PCS
SIM cutting ferrule
1PCS
antenna
2.4G 5DB detachable black rod-shaped antenna 2 pieces
9 Product operating environment requirements
operating temperature storage temperature
-20 60 -4070
operating humidity
10%90%RH noncondensing
Storage humidity
5%90%RH noncondensing
10 Software configuration information
Default IP
Username / Password 2.4G SSID
5.8G SSID
192.168.1.1
root/admin WIFI-XXXXXX (X represents the last 6 digits of the MAC address), default password-free NA
WIFI-XXXXXX (X represents the last 6 digits of the MAC address), default no password. The above are the regular default configuration information of the product. Our OS firmware or OPENWRT firmware is used. The WIFI SSID may vary, but the default IP and WEB login name and password of this product remain unchanged. For other detailed software functions, please refer to the product manual.
9 10
Shenzhen Zhibotong Electronics Co., Ltd 11 FCC Warning
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. FCC warning: Any Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: -Reorient or relocate the receiving antenna. -Increase the separation between the equipment and receiver. -Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. -Consult the dealer or an experienced radio/TV technician for help. This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator & your body.
10 10
Documents / Resources
 |
zbT Z48-2100-1C Response Linq Router [pdf] Instruction Manual 2BQZD-Z48-2100-1C, Z48-2100-1C Response Linq Router, Z48-2100-1C, Response Linq Router, Linq Router, Router |