Z03 Wireless Controller User Manual

Z03 Wireless Controller
Manual

Applicable instructions

1. This product adopts an ergonomic design with a comfortable feel.
2. Using a Bluetooth 5.2 EDR/BLE connection, the controller is connected to various hosts, such as mobile phones, through Bluetooth.
3. Supports the ShootingPlus app, which can be downloaded from various mobile app markets.
4. Supports Android and Harmony OS HID standard modes, and can play various game hall games that support HID standard modes.
5. Supports Android 6.0 and above systems (ie ShootingPlus Android mode).
6. Supports MFi games for iOS 13.0 and above systems, which can be downloaded from the Shan Wan MFI app.
7. Supports Bluetooth connection for playing games on P53/PS4/SV/ITCH game console, and has gyroscope function.
8. Supports Bluetooth connection for Windows 10 laptops and plays X-Input games
9. Supports USB cable and can play PC/PS3/SWITCH games.
10. The controller can be upgraded with firmware and additional feature modifications and settings by downloading and installing the GamepadSpace app on the phone
    Due to phone system issues, some phones may not support this device
    Due to uncontrollable factors such as software upgrades or source code changes on the official gaming platform, some games cannot be connected and operated with this product. Our company is not responsible for any issues. Our company reserves the final right of interpretation regarding this matter.

Product characteristic parameters

1. Working voltage: DC3.7V
2. Working current: approximately 10mA
3. Continuous use time: 20 h
4. Sleep current: <5uA
5. Charging voltage/current: DC5V/500mA
6. Bluetooth transmission distance: <-BM
7. Battery capacity: 600mAh
8. Standby time: fully charged and left for 60 days

Notes:

1. Please do not store this product in damp or high-temperature areas;
2. Do not strike, drop, stick, puncture, or attempt to disassemble this product to avoid unnecessary damage to the product;
3. The product is equipped with a built-in battery; please do not dispose of it with garbage;
4. Do not charge the controller near fire or other heat sources,
5. Non-professionals are not allowed to disassemble this product; otherwise, it will not be covered by the after-sales warranty service.

Function button diagram

Product Instructions

Android ShootingPlus V3 mode (HarmonyOS and Android Shooting Plus V3 mode are the same):
Simultaneously press [A+HOME] for 2 seconds to enter V3 Android mode, and the controller indicator light will flash quickly. When the Android phone searches for the device name “BSP-Z03”, select “Connect”. After successful connection, the indicator light on the handle remains red.
After successfully connecting, you can directly press [HOME]; the indicator light will flash slowly and automatically reconnect

Android/HarmonyOS/iOS key mapping function:
Follow the official account “Shooting Plus” and view the default operating instructions in the official account. If you need to set the mapping keys, please download and install the “Shooting Plus” APP, map the keys, and adjust the key positions in the APP. Shooting Plus App for Android and HarmonyOS can be downloaded from various mobile application markets.

https://qixiongfiles.cn/app/V5Download.html

Android Standard Mode:

1. Simultaneously press [X+HOME] for 2 seconds to enter standard Android mode, and the controller indicator light will flash quickly. When the Android/HarmonyOS phone searches for the device name “BSP-203”, select Connect. After a successful connection, the indicator light on the handle remains on [orange].
   Successfully connected, you can directly press [HOME], the indicator light will flash slowly and automatically reconnect.
2. In Android/HarmonyOS standard mode, you can download various game halls and enter the platform to download the required games.

IOS MFi mode:
Simultaneously press [B+HOME] for 2 seconds to enter IOS MFI mode, and the controller Indicator light will flash quickly. When the Apple phone searches for the device name “DUALSHOCK 4 Wireless Controller”, select “Connect”. After successful connection, the indicator light on the handle remains on [purple]. Successfully connected, you can directly press [HOME], the indicator light will flash slowly and automatically reconnect
MFI games can be downloaded from the ShanWan MFI app.

PC X-input Bluetooth mode:
At the same time, press [RB+HOME] for 2 seconds to enter the Bluetooth mode of the computer. The indicator light on the controller will flash quickly. Open the computer, find the Bluetooth device to add, click search, and when you find the device name “Xbox Wireless Controller”, select connect. After successful connection, the indicator light on the handle remains on [cyan].
Successfully connected, you can directly press [HOME]; the indicator light will flash slowly and automatically reconnect

Switch mode:
On the Switch host, select Controller->Change Grip/Order to enter the Switch host pairing mode interface. Press L+R on the controller. Simultaneously press [RT+HOME] for 2 seconds to enter the SWITCH mode pairing. The handle indicator light flashes, and if pairing is successful, the handle indicator light remains on [green]. Successfully connected, you can directly press [HOME], the indicator light will flash slowly and automatically reconnect.

PC 2.4G computer receiver mode:
Simultaneously press [LB+HOME] for 2 seconds to enter computer mode. The indicator light on the controller flashes quickly, indicating PC connection mode. The computer receiver is plugged into the computer. After successful connection, the indicator light on the handle remains on [cyan].
Successfully connected, you can directly press [HOME], the Indicator light will flash slowly and automatically reconnect.

Wired mode:

1. Automatic recognition of various system platforms in wired mode, supported by Android, PC (D-input and X-input), PS3, and Switch.
2. On a PC, pressing the [HOME] button for 2 seconds can switch between PC/PS3 mode and XBOX360 mode.

Motor vibration force adjustment

Pressing and holding the TURBO+right joystick up and down can enhance and weaken the motor vibration force

TURBO settings

Press “A” and then “T” to activate the Turbo burst
Press “A” for the second time and then “T” again; the “A” key will be sent continuously automatically
Pressing “A” for the third time and then “T” will turn off the burst (restore the original state)
When the “A” button is in AUTO mode, press and hold “TURBO+left joystick up and down to set the automatic firing speed, which is 15 times per second, 25 times per second, and 8 times per second, respectively. (Note: Other function key settings are the same as above)

Axis calibration function

Place the handle flat on the desktop, while holding down the [START+HOME] button, wait for the indicator light to stay on, then release. After calibration is completed, the indicator light will turn off.

Strong body sensation opening

1. Press and hold the “T” button for eight seconds, and if the motor vibrates, switch to simulating the right joystick.
   When the six-axis has been switched to
2. the right Joystick, lightly press “T” to enter the semi-open state of the gyroscope. The main use scenario is to assist in shooting and aiming when pressing 12 to open the mirror in FPS games.
3. Press and hold the “T” button again for eight seconds, and if the motor vibrates, switch to simulating the left joystick.
4. Press and hold the “T” button again for eight seconds, and if the motor vibrates, cancel

ABXY key value exchange function

Press and hold the handle “Y”+”A”+”HOME”, and the ABXY key values can be interchanged with the PC layout key value and the Switch layout key value.

Macro programming:

[Back macro extension settings]

1. Press and hold the ‘SELECT’ button on the controller, then press M1. At this time, the controller indicator light will flash quickly, which indicates the setting mode

[M2 setting method as above]

1. After the setting mode is turned on, the “status indicator light” will flash quickly. At this time, you can set the button, and the key pressed on the handle will be recorded on the M1 button. For example, press the A key once, and A will be entered into M1. [This key is listed; other key positions can also be entered]
2. If multiple buttons need to be set: press A, then press B, then press X, and then press Y, so that the order of using M1 to attack is A, B, X, and Y. [This button is set to list: other attack orders can be set with 12 ABXY/up, down, left, right/L/ZL/R/ZR]
3. After pressing the button, press M1 again to complete the programming, and the “status indicator light” will remain on

[Back macro clear button]
At the same time, press and hold the “SELECT”+”M1” keys on the handle to enter programming mode. At this time, the “status indicator light” will flash quickly. Do not type any key values at this time. Press the “M1” key again to eliminate the key values set before the M1 key.

Handle charging/hibernation/wake-up function

1. Handle charging function:
   A. When the battery is low, the indicator light flashes quickly to indicate;
   B. When charging, the indicator light flashes slowly to indicate;
   C. When fully charged, the handle shuts down;
2. Handle hibernation/wake-up/shutdown function:
   A. The controller automatically shuts down and goes to sleep when there are no button operations within 5 minutes;
   B. When you need to use it again, you need to press the [HOME] button to wake up and reconnect;
   C. Press and hold the [HOME] button for 8 seconds in the power-on state to shut down the product and turn off all LED indicators.

Operation and usage mode

Bluetooth mode:

Applicable system	Android/Harmony OS		IOS system
Working mode	Shooting Plus V3	Android Standard Mode	IOS MFI mode
MOSE pairing: 12 seconds long	A+HOME	X+HOME	B+HOME
Status indicator	Red	Orange	Purple
notes	Play games downloaded from the Android Market	Play Android HID Game Hall	Play the MFi game ShanWan MFi App for download

Computer receiver and data cable mode:

Applicable system	Computer/PC/Bluetooth	PC 2.4G	PS3/PS4/PS5	Switch
Mosie pairing (2 seconds lang)	RB+HOME	LB-HOME	Plug in USB data cable	RT HOME or Plug in USB
Status indicator	Cyan	Cyan	Blue	Green
notes	Play X-input games	Play X-input and D-input games	Play PS3/PS4 games	Playing Switch Games

*Computers need an optional computer receiver