YUN ESS Driver Drill
Specifications
| Tool | Description |
|---|---|
| Pencil | Used for marking the position on the wall. |
| Drill | Used for creating holes in the wall. |
| Screwdriver | Used for securing the mounting bracket. |
| Allen Wrench | Used for tightening the fixture to the bracket. |
Easy to Install Guide
Installation Steps
- Mark the position on the wall using a pencil.
- Use a drill to create a hole at the marked position.
- Insert and secure the mounting bracket using a screwdriver.
- Attach the fixture to the bracket and tighten with an Allen wrench.
FAQ’s
What tools do I need for installation?
You will need a pencil, drill, screwdriver, and an Allen wrench.
How do I ensure the fixture is securely attached?
Make sure to tighten the fixture with the Allen wrench until it is firmly in place.
Can this installation be done on any wall type?
Ensure the wall can support the fixture and use appropriate anchors if necessary.
Documents / Resources
 |
YUN ESS Driver Drill [pdf] Installation Guide ESS Driver Drill, ESS, Driver Drill, Drill |