YsxLite A7 Security Camera App User Guide

YsxLite A7 Security Camera App

Specifications

Installation APP

Mobile phone scan e following QR code ·for download and installatio Name of Software: YsxUte.

Connection Method 1: no network connection

1. Connect the machine’s own hot spot, the hot spot at the beginning of BAT. Click Connect. After the link s successful return to APP, as shown in the following figure.
   • Click o open the system WiFI Interface
   • WiFl with BAT starting name
2. After entering the page. follow the steps below.
   • After the successfiil conn ctiOn 1s displayed, click Sereen viewing
3. .No network link has been completed, you can watch the video closely.
   Note: You can’t remotely monitor the WIFi that links the camera within 4 meters of the camera every time you view it without a network link, With WIFI at home, you can perform the following steps to achieve remote monltoring .

Connection method 2: Internet connection

1. Connect the machine’s own hot spot, he l1ot spot at the beginning of BAT. Click Connect. After the link is successful return to APP, as shown in the folio •lr-g figure.
   • Click to open the system WlFI interface
   • 2.W1Ft with BAT starting name
2. Find your own WlFI account and ernter the password correctly then click to return
   • Click on the pimon in the figure
   • Click WiFi Settings
   • Find WiFi and enter the password link
3. When you return to the APP. you will see that the reminder link is successful. At this time, you can click the play button to view the screen. and the remote setting is successful
   • Note; As long as the WIFI password is correct. it can be linked. If it cannot oe inked. first forget the router password, verity the passwcxd. and then re—enter it.

Troubleshooting

• Connection fails: Verify that your Wi‑Fi password is correct.
• If the issue continues: forget the router network in your phone settings, verify the password manually, and then attempt the camera Wi‑Fi setup again.