YourMechanic Replacing Window Switch Installation Guide

YourMechanic-logo

YourMechanic Replacing Window Switch

YourMechanic-Replacing-Window-Switch-product

Please always verify compatibility with your year, make, model, and OEM part number before proceeding.

Compatibility

  • Compatible with 2015-2020 Ford F-150
  • Compatible with 2015-2019 Ford Edge
  • Compatible with 2013-2020 Ford Fusion
  • Compatible with 2015-2023 Ford Mustang
  • Compatible with 2018-2022 Ford Expedition
  • Compatible with 2019-2020 Ford SSV Plug-In Hybrid
  • Compatible with 2019-2020 Ford Police Responder Hybrid
  • Compatible with 2017-2018 Lincoln MKX
  • Compatible with 2019-2021 Lincoln Nautilus
  • Compatible with 2018-2019 Lincoln Navigator
  • Compatible with 2017-2019 Lincoln Continental

Replaces OEM Part Number:

  • SW7340, DG9Z-14529-AB

Technical Specification

  • Function integration: Control the lifting and lowering of passenger window

Interface:

  • 5-pin

Essential tools

  •  Flat-blade screwdriver (preferably with a thin, non-marring tip)
  • Plastic trim removal tools (optional, to avoid scratches)
  • Flashlight (for visibility in tight spaces)

 Installation

Step 1

Removing the Power Window Switch

  1. Pry up the window switch with a door panel removal tool
  2. Disconnect the wiring harness
  3. Press the clips on the switch and remove it from the trim

Step 2

Installing the Power Window Switch

  1. Clip the switch into the trim
  2. Connect the wiring harness
  3. Press the window switch into the door pane

Step 3

Test the Switch

  1. Reconnect the battery:
    Reattach the vehicle’s negative battery terminal.
  2. Operate the window:
    Test all functions (up/down) to confirm proper operation.

Important Notes

  • Battery Safety: Always disconnect the battery before working on electrical components to prevent short circuits.
  • Compatibility : Ensure the replacement switch is designed for your original switch.

Troubleshooting

  •  Switch not working: Double-check the wiring harness connection and test the vehicle’s fuse in the cabin fuse box.
  • Loose panel: Re-seat the clips or replace broken ones for a snug fit.

Frequently Asked Questions

Is this window switch compatible with other vehicle models?

No, this window switch is specifically designed for the listed Ford and Lincoln models.

Can I install this window switch myself?

Yes, you can follow the provided installation manual for step-by-step instructions on replacing the window switch.

Documents / Resources

PDF thumbnailReplacing Window Switch
Installation Guide · Replacing Window Switch, Window Switch, Switch

References

Ask a Question

Use this section to ask about setup, compatibility, troubleshooting, or anything missing from this manual.

Ask a Question

Ask about setup, compatibility, troubleshooting, or anything missing from this manual. Name and email are optional.