YOSEMITE-TECHNOLOGIES-Y600-A-Portable-Dissolved-Oxygen-Meters-LOGO

YOSEMITE TECHNOLOGIES Y600-A Portable Dissolved Oxygen Meters

YOSEMITE-TECHNOLOGIES-Y600-A-Portable-Dissolved-Oxygen-Meters-PRODUCT

¨     Water Quality Testing

¨     Aquaculture

¨     Wastewater

¨     Environment

¨     Groundwater

¨     Surface Water

¨     Food and Beverage

¨     Process Control

¨     Oceans etc.

 

 Advantages of Optical:

No oxygen consumption No flow rate limitations No H2S interference

No membrane No electrolyte No electrodes

Low maintenance Fast response Better stability Low drift

Y600-A

Optical Dissolved Oxygen Meter

M1500K

Galvanic Dissolved Oxygen Meter

Model Y600-A M1500K
 

Probe Type

Y506-A IP68 Optical dissolved oxygen sensor Probe size: 180mm x 16mmØ on 5m cable Supplied with sensor protection shield

Quick and easy sensor cap replacement

M9501-3 IP68 Galvanic type probe Probe size: 165mm x 24mmØ on 3m cable Requires regular calibration to correct drift Frequent servicing of probe and electrolyte
Meter IP67 Waterproof multi-function meter

(can be used with other optional probes)

IP67 Waterproof, rugged and shock resistant
DO Range 0.00~199.99% and 0.00~19.99mg/L 0.0~199.9% or 0.0~19.99mg/L
Temperature 0 ~ 50°C (automatic compensation)
Accuracy ±1% of FS / ±0.2°C ±1.5% of FS / ±0.5°C
Pressure Built-in sensor (50~115kPa) Automatic pressure correction Manual pressure correction
Salinity Manual Salinity compensation
Calibration One or two points (100.0%SAT and 0%SAT)
Data Logger Memory for 5000 data sets USB transfer as CSV file û
Power Supply 2 x 18650 rechargeable batteries

(charger not included, use any USB type)

2 x AAA alkaline batteries
Weight approx. 450g approx. 260g
Dimensions (mm) 220 x 96 x 44mm 160 x 70 x 36mm
 

Accessories

c/w carry strap, Y506-A Optical probe with cap, protection shield, 2 x 18650 rechargeable batteries, USB cable and manual c/w carry case, M9501-3 Galvanic probe, spare membrane, 30ml electrolyte,

2 a AAA batteries and manual

Model Y600-A M1500K
 

Probe Type

Y506-A IP68 Optical dissolved oxygen sensor Probe size: 180mm x 16mmØ on 5m cable Supplied with sensor protection shield

Quick and easy sensor cap replacement

M9501-3 IP68 Galvanic type probe Probe size: 165mm x 24mmØ on 3m cable Requires regular calibration to correct drift Frequent servicing of probe and electrolyte
Meter IP67 Waterproof multi-function meter

(can be used with other optional probes)

IP67 Waterproof, rugged and shock resistant
DO Range 0.00~199.99% and 0.00~19.99mg/L 0.0~199.9% or 0.0~19.99mg/L
Temperature 0 ~ 50°C (automatic compensation)
Accuracy ±1% of FS / ±0.2°C ±1.5% of FS / ±0.5°C
Pressure Built-in sensor (50~115kPa) Automatic pressure correction Manual pressure correction
Salinity Manual Salinity compensation
Calibration One or two points (100.0%SAT and 0%SAT)
Data Logger Memory for 5000 data sets USB transfer as CSV file û
Power Supply 2 x 18650 rechargeable batteries

(charger not included, use any USB type)

2 x AAA alkaline batteries
Weight approx. 450g approx. 260g
Dimensions (mm) 220 x 96 x 44mm 160 x 70 x 36mm
 

Accessories

c/w carry strap, Y506-A Optical probe with cap, protection shield, 2 x 18650 rechargeable batteries, USB cable and manual c/w carry case, M9501-3 Galvanic probe, spare membrane, 30ml electrolyte,

2 AAA batteries and manual

Distributor: A Smith Process Instrumentation cc

PO Box 449 Pinegowrie 2123

Tel: 011 782 7279 / 888 7144      WhatsApp: 087 255 6713

e-mail: sales@instruments.co.za     website: www.instruments.co.za

Documents / Resources

YOSEMITE TECHNOLOGIES Y600-A Portable Dissolved Oxygen Meters [pdf] User Manual
Y600-A, Portable Dissolved Oxygen Meters, Y600-A Portable Dissolved Oxygen Meters, Dissolved Oxygen Meters, Oxygen Meters, Meters

References

Leave a comment

Your email address will not be published. Required fields are marked *