Yooning MP-2500 Microplate Centrifuge Instruction Manual
General Information
Thank you for purchasing our Product.
This Manual for users contains function and operation of the Instrument. In order to use the instrument properly, please read this manual carefully before operation.
Please check the instrument and accessories with the packing list at the first time you open the instrument packing case.
Introduce
MP-2500 is a transient centrifuge designed for microplates, which is convenient for the wall drops. It is suitable for 96-well, 384 and small-capacity micro plates, as well as skirts and various standard PCR microplates.
Operation Guide
The Structure
Fane Plate and Display
Key functions
Press the up and down key to set the time.
The Short button
The start/stop button
The Operation
Timer Setting
a) When the Instrument powers on, it starts self-checking with the sound of de…
b) About 1s later, 10:00 in the time display is the last set time.
c) Press 
or 
to set the timer. Long press to set the time quickly.
The Touch
Press , it will run with the max. speed. When it reaches the maximum speed, the timer begins to work. It decelerates to stop when. releasing button
The Start/Stop
Close the lid after setting the time. Then press to run. When it reaches the maximum speed, the timing begins. Press the button during the running, it will decelerate to stop with 3 sound of de…
Note:
- It doesn’t run with 2 sounds of de… and E1 is displayed if the cover not closing The time will be displayed after closing the cover.
- Do not open the cover before the rotor stops.
- Samples should be placed symmetrically in equal quantities
Safety
- place on a stable work platform
- Don’t move the instrument during operation
Clean
Clean the instrument with a dry cloth and a non-corrosive cleaning solution with a pH of 7 ± 1; Do not immerse the instrument in a liquid or use a liquid to wet the instrument; Ensure that all parts of the instrument are completely dry before running the instrument.
The Parameters
| Voltage | DC24V, 2A | Power | 48W |
| Speed | 2800rpm | Noise | ≤60dB |
| Max. RCF | 600 xg | Speed Deviation | ≤10% |
| Time | 1~99s | Deceleration rate | ≤6s |
| Dimension (mm) | 220x245x200 | Weight | 2.5kg |
Troubles and Shootings
| Troubles | Causes | Shootings |
| The rotor not working | 1. The power cord not plugged in. | Check the power cord |
| 2. No power supply to the socket | Check the socket | |
| 3. The switch not turning on | Check the switch | |
| 4. The lid Not closed | Check the lid | |
| Noise, severe vibration or abnormal noise after starting up | 1. Not placed on a horizontal platform | Place it on a horizontal platform |
| 2. Loose screws | Tighten the screws | |
| 3. Samples not placed symmetrically | Place the sample symmetrically | |
| E1 error | Lid cant close | Contact supplier |
| E2 error | Over speed | Contact supplier |
| E3 error | Motor stalling | Contact supplier |
Performance Test
| Item | Microplate Centrifuge | Model | MP-2500 | |||
| Date | Serial No. | |||||
| No. | Content | Methods | Standards | Results | ||
| 1 | Basic Function | Visual check | Valid | □Qualified | ||
| 2 | Appearance | Visual check | Pass | □Qualified | ||
| 3 | Label | Visual check | Pass | □Qualified | ||
| 4 | Speed | Tachometer | 2800±10%rpm | □Qualified | ||
| 5 | Deceleration Time | Calculagraph | T≤6s | □Qualified | ||
| 6 | Noise Level | Sound Level Meter | ≤60dB | □Qualified | ||
| 7 | Amplitude | Dial Gauge | ≤0.3mm | □Qualified | ||
| 8 | Continuous Running Test | Operation | 30 min for 5 times without problem | □Qualified | ||
| Result | ||||||
| Remarks: | ||||||
| QC: Confirmer: | ||||||
Packing List
| No. | Item | Model/Type | Quantity | Confirm |
| 1 | Micro Plate Centrifuge | MP-2500 | 1 | |
| 2 | Adapters for tubes | 2 | ||
| 3 | Power Line | DC24V | 1 | |
| 4 | QC PASS Card | 1 | ||
| 5 | Manual | 1 | ||
| QC: Date: | ||||
Hangzhou Yooning Instrument Co., Ltd.
Address： 4 floor, #6 Building, No.3 Shengang Road,
Yuhang District,Hangzhou, China
Customer Service：+86-571-86907383 / 87613616
Website: www.yooning.com
Documents / Resources
 | Yooning MP-2500 Microplate Centrifuge [pdf] Instruction Manual MP-2500, MP-2500 Microplate Centrifuge, Microplate Centrifuge, Centrifuge |
