YONGNUO YN360IV RGB Led Video Light Lamp
Introduction
Thank you for using YN360Iv. Please read the user manual carefully before use,thank you.
Precautions
Do not put the product close to or throw it into the fire source to avoid the danger of fire and explosion. Do not disassemble the product, maintenance or repair of this product should be handled by technical maintenance personal of our company or authorized technical maintehance personal. When the product is running, please do not look directly at the COB lamp beads, do not cover the heat emission hole, and do not touch the COB lamp beads; When the device is running, do not look directly at the light. Do not use this product in flammable and explosive place,or where it can be exposed to moisture.
Product specification
Product structure
Remote Control Structure
Reflector Structure
Remote Control Installment
Please pull out the battery insulation gasket of the remote control for the first use. Installment: Follow the arrow direction to install the remote control. The screen will be automatically turned off after 1min no-operation. Removal: Press and hold the remote control lock buckle to remove it in the opposite direction of the arrow. The screen will be automatically turned off after 15s no-operation.
Two power supply modes
- Uses battery for power supply. Installment: Follow the arrow direction to install the NP-F series battery.
Removal: Press the battery lock buckle to remove the battery in the opposite direction of the arrow.
The standard version does not contain NP-F series batteries. - Powered by power adapter.
Power ON or OFF
Standard Mode
- Tone Setting.
- Effects Setting.
- Channel Setting.
Press <M1> to enter menu, choose <CH> channel, press <OK>, adjust channel, press <OK> to finish setting, press <M1> again to return.
- 4 professional light adjustment curve models.
Press <M1> to enter menu, press > and adjust until twinkles, press “OK” to stop twinkling, adjust the key to choose the curve made
Light Lock Mode
Turn on light lock mode,the remote control and APP are locked simultaneously and non- operational.
Multiple Lights Layout Mode
Please download APP for using layout mode.
The Use of APP and Remote Control
- Press <M1> to enter menu, choose bluetooth <, press <OK> to turn or off the bluetooth. then open the APP to connect automatically.
- 2.4G wireless mode can be turned on or off.
- Visit YONGNUO official website or scan the APP QR code in the manual to download.
The functions in this manual are based on the test conditions our company.Further notice will not be given if the design and specifications change.
Documents / Resources
 |
YONGNUO YN360IV RGB Led Video Light Lamp [pdf] User Manual YN360IV RGB Led Video Light Lamp, YN360IV, RGB Led Video Light Lamp, Video Light Lamp, Light Lamp, Lamp |
