tuya-Logo

Tuya PLC Gateway Development Framework Software

tuya-PLC-Gateway-Development-Framework-Software-Product

Awọn pato

  • Product: PLC Sub-Device Connectivity
  • Ẹya: 20250317
  • Idajọ Ayelujara

ọja Alaye

Power Line Communication (PLC) sub-device connectivity is designed to help you easily develop PLC gateways. Tuya’s hardware and software-integrated solution provides a PLC module and software implementation, allowing you to build a PLC gateway with no code and connect to PLC sub-devices in the Tuya ecosystem. This topic describes how to use the PLC features with the TuyaOS Gateway Development Framework.

abẹlẹ Alaye

Developing a PLC gateway has a high barrier to entry and a long development cycle. Tuya’s hardware and software-integrated solution makes complicated gateway development simple. Even if you do not have any PLC knowledge, you can build a PLC gateway cost-effectively. Connect your hardware to Tuya’s PLC module through the serial port and enable PLC features in the software. Then, your product becomes PLC-capable and can connect to Tuya-enabled sub-devices.

Itọsọna Idagbasoke

This section describes how to enable PLC features with the TuyaOS Gateway Development Framework by making API calls. Two interfaces are used to enable PLC features: PLC initialisationtuya_plc_svc_init and PLC startup tuya_plc_svc_start. They have the same parameters in JSON used for configurations.

Apejuwe iṣeto ni

Fields in the JSON data:

Aaye dev name Cts baud oṣuwọn Apejuwe
Specifies the serial port number. Specifies the serial port number used for communication.
Specifies whether to enable hardware flow control. 1 : Enable0 : Disable Whether to enable hardware flow control depends on the PLC module you use.
Baud rate for serial communication Set according to PLC requirements The baud rate for serial communication between the PLC module and the gateway’s microcontroller chip.

Example

tuya-PLC-Gateway-Development-Framework-Software-fig-1 (1) tuya-PLC-Gateway-Development-Framework-Software-fig-1 (2)

FAQs

Q: What is the purpose of the PLC Sub-Device Connectivity?
A: The purpose is to help users easily develop PLC gateways and connect to PLC sub-devices in the Tuya ecosystem.

Awọn iwe aṣẹ / Awọn orisun

tuya PLC Gateway Development Framework Software [pdf] Itọsọna olumulo
PLC Gateway Development Framework Software, Gateway Development Framework Software, Development Framework Software, Framework Software

Awọn itọkasi

Fi ọrọìwòye

Adirẹsi imeeli rẹ kii yoo ṣe atẹjade. Awọn aaye ti a beere ti wa ni samisi *