SMARTRISE VERSION 1.03 C4 LINK2 PROGRAMMER

Awọn pato

• Orukọ ọja: C4 Link2 Olupese
• Ẹya: 1.03
• Ọjọ: Oṣu kọkanla ọjọ 7, ọdun 2025

Pariview

• Iwe yii n pese awọn ilana igbesẹ-nipasẹ-igbesẹ fun igbasilẹ, fifi sori ẹrọ, ati lilo Oluṣeto Link2 pẹlu awọn olutona C4. O ṣe alaye bi o ṣe le gbe sọfitiwia sori oluṣakoso C4 ni lilo Oluṣeto Link2.

Awọn irinṣẹ ti a beere fun siseto sọfitiwia

Awọn irinṣẹ wọnyi ni a nilo lati ṣeto sọfitiwia naa:

1. Kọǹpútà alágbèéká kan pẹlu ẹrọ ṣiṣe ti o da lori Windows.
2. The Link2 Programmer.
3. Controller software: The original controller software is stored on a flash drive inside the white job binder. If the flash drive is missing or contains outdated prints and software, Smartrise can provide a webọna asopọ lati wọle si sọfitiwia tuntun ati awọn atẹjade.

Ohun elo Gbigba Awọn ilana

Lati gbe sọfitiwia sori oluṣakoso Smartrise, ohun elo siseto gbọdọ ṣe igbasilẹ si kọnputa agbeka. Ohun elo yii wa lori kọnputa filasi. Tẹle awọn igbesẹ wọnyi lati ṣe igbasilẹ ohun elo Programmer C4 Link2:

1. Ṣii filasi drive.
2. Navigate to (5) – Smartrise Programs and open the folder.
3. Wa ki o ṣii folda Programmer C4.
4. Ṣe igbasilẹ ati ṣiṣẹ awọn ohun elo mejeeji lori kọǹpútà alágbèéká. Diẹ ninu awọn kọǹpútà alágbèéká le ni awọn ogiriina ti o ṣe idiwọ awọn ohun elo lati ṣe igbasilẹ. Fun iranlowo, kan si alabojuto eto.
5. Ni kete ti pari, awọn ohun elo meji yẹ ki o han lori deskitọpu.
   AKIYESI: MCUXpresso ko nilo lati ṣii, fi sori ẹrọ nikan lori kọǹpútà alágbèéká.

Awọn ilana Ikojọpọ Software

Lati rii daju pe iṣẹ ṣiṣe to dara, sọfitiwia oluṣakoso gbọdọ wa ni ti kojọpọ sori oluṣakoso Smartrise nipa lilo Programmer Link2. Tẹle awọn igbesẹ isalẹ lati pari ilana naa:

1. So Link2 Programmer to laptop nipasẹ USB ibudo.
2. Ṣii C4 Link2 Programmer nipa tite aami rẹ lẹẹmeji. Ohun elo naa yoo ṣe imudojuiwọn laifọwọyi si ẹya tuntun ti o ba sopọ si intanẹẹti. Rii daju pe ohun elo ti wa ni imudojuiwọn ṣaaju ilọsiwaju.
3. Ṣawakiri fun sọfitiwia oluṣakoso:
   • Ṣii (1) – Software Adarí.
   • Yan folda pẹlu orukọ iṣẹ.
   • Yan Ọkọ ayọkẹlẹ lati gbe sọfitiwia fun.
   • Tẹ Yan Folda ni isalẹ ti window.
4. Yan ero isise lati mu dojuiwọn nipa lilo akojọ aṣayan silẹ. Awọn ilana le ṣe imudojuiwọn ni eyikeyi aṣẹ:
   • MR A: MR MCUA
   • MR B: MR MCUB
   • SRU A: CT ati COP MCUA
   • SRU B: CT ati COP MCUB
   • Riser / Imugboroosi: Riser / Imugboroosi ọkọ
   • Isise awọn isopọ le ri lori awọn ọkọ.
5. Bẹrẹ ilana ikojọpọ sọfitiwia nipa tite bọtini Bẹrẹ.
   • Pataki: Nigba siseto MR SRU, awọn ọkọ ayọkẹlẹ miiran ninu ẹgbẹ le ni ipa. Lati yago fun eyi, ge asopọ awọn ebute ẹgbẹ lori ọkọ.
6. Ferese tuntun yoo han, ati igbasilẹ sọfitiwia yoo bẹrẹ. Ni kete ti o ti pari, ifiranṣẹ ijẹrisi yoo han.AKIYESI: Ti sọfitiwia ba kuna lati ṣe igbasilẹ, gbiyanju atẹle naa:
   • Tun ilana naa gbiyanju.
   • Lo ibudo USB ti o yatọ.
   • Yiyipo agbara oludari.
   • Rii daju pe Link2 Programmer ti sopọ mọ daradara.
   • Tun kọǹpútà alágbèéká bẹrẹ.
   • Gbiyanju o yatọ Link2 Programmer.
   • Lo kọǹpútà alágbèéká ti o yatọ.
   • Kan si Smartrise fun iranlọwọ.
7. Tẹ Ṣatunkọ lati tẹsiwaju ikojọpọ sọfitiwia fun awọn ilana ti o ku ki o tẹle awọn igbesẹ ti tẹlẹ.
8. Ni kete ti gbogbo awọn ikojọpọ sọfitiwia ti pari, tun sopọ awọn ebute ẹgbẹ ati yipo agbara oludari naa.
9. Ṣe idaniloju ẹya sọfitiwia labẹ Akojọ aṣyn akọkọ | Nipa | Vers.
10. Yi lọ si isalẹ lati view gbogbo awọn aṣayan ki o jẹrisi ẹya ti o ti ṣe yẹ ti han.
    • ORUKO ISE
    • SRU BOARD
    • CAR LABEL
    • JOB ID: ########
    • VERS. ##.##.##
    • © 2023 SMARTRISE
11. Default to factory settings by navigating to Main Menu | Setup | Miscellaneous | Default | Default Factory.

Restoring a Bricked Processor

In the event of a bricked processor, follow the steps below to restore functionality:

1. Locate the two jumpers positioned beneath the LCD display – one jumper corresponds to each processor.
2. Connect the jumper associated with the affected (bricked) processor to establish communication.
3. Power cycle the board.
4. Once power is restored, program the processor using a release file that already includes a bootloader.
5. Start the application once programming is complete.
6. Remove the jumper used for recovery.
7. Power cycle the board again to finalize the restoration.

FAQs

Q: What should I do if I encounter issues with downloading the programming application?

A: If you face problems downloading the programming application due to firewalls or other reasons, contact your system administrator for assistance.

Awọn iwe aṣẹ / Awọn orisun

SMARTRISE VERSION 1.03 C4 LINK2 PROGRAMMER [pdf] Itọsọna olumulo VERSION 1.03 C4 LINK2 PROGRAMMER, VERSION 1.03, C4 LINK2 PROGRAMMER, LINK2 PROGRAMMER, PROGRAMMER

Awọn itọkasi

• Itọsọna olumulo