ChipPro FPGA Device Programme
Quickstart Kaadi
Pariview
ChipPro jẹ ojutu siseto ẹrọ iyara ati irọrun fun awọn ẹrọ Microchip's Field Programmable Gate Array (FPGA). ChipPro Programmer baseboard gbalejo asopo kan lati pulọọgi sinu FlashPro6, pirogirama tuntun wa ti o ṣe atilẹyin Linux ati awọn iru ẹrọ Windows, ni apapo pẹlu Libero SoC, FlashPro Express, ati sọfitiwia SmartDebug. FlashPro ṣe atilẹyin gbogbo awọn ẹrọ FPGA ni PolarFire SoC, PolarFire, SmartFusion 2, IGLOO 2 ati RTG4″, ati RT PolarFire jara. Module-On-Module (SOM) ti o baamu si iwọn package kọọkan ati iru ninu apo-iṣẹ Microchip ti FPGA tun le sopọ si apoti ipilẹ lati ṣe eto package FPGA.
Table 1-1. Awọn akoonu Kit-ChipPro Baseboard (CP-PROG-BASE)
| Opoiye | Apejuwe |
| 1 | ChipPro Programmer® baseboard |
| 1 | Oluṣeto FlashPro6 (FLASHPRO6) |
| 1 | 12V, 5A AC ohun ti nmu badọgba agbara ati okun |
| 1 | Quickstart kaadi |
Table 1-2. Awọn akoonu Kit-ChipPro SoM
| Nọmba apakan | Apejuwe |
| 1 | ChipPro SoM fun MPFXXXX-XXXXXX tabi M2GLXXXX-XXXXXX |
olusin 1-1. Microchip ChipPro-FPGA Device Programmer
1.1 Jumper Eto
Olupilẹṣẹ ẹrọ ChipPro FPGA wa pẹlu awọn eto jumper aiyipada atẹle:
Table 1-3. Jumper Eto
| Jumper | Pin | Aiyipada Factory |
| J6, J7 | 2–3 | Kukuru 1–2: Tọkasi pe ẹrọ FPGA kan ko ni kojọpọ sori ChipPro SoM, ti a ṣeduro fun gbigbe igbimọ nikan (laisi Silicon) Kukuru 2–3: Tọkasi pe ẹrọ FPGA kan ti kojọpọ sori iho ti igbimọ ChipPro SoM |
| J26 | 1–2 | Ṣii |
| J17, J18, J19, J20 | 1–2 | Kukuru 1–2: Mu akọsori siseto SPI ṣiṣẹ Kukuru 2–3: Mu asopọ SPI Flash DB ṣiṣẹ |
| J21 | 1–2 | Mu SPI ṣiṣẹ |
| J22 | 1–2 | Ṣe atunto I/O |
| J23 | 1–2 | Ni ipamọ |
1.2 Nṣiṣẹ Ririnkiri
Lati faramọ pẹlu awọn pirogirama FlashPro ati atilẹyin ẹrọ ti o baamu ṣaaju ki o to bẹrẹ pẹlu ChipPro, tọka si awọn iwe aṣẹ atẹle.
Lati ṣiṣẹ demo, ṣe awọn igbesẹ wọnyi:
- Sopọ socketed ChipPro SoM Board (fun ẹrọ ati iru package ti ise agbese rẹ) si awọn baseboard (mö J3 ati J4 Connectors lori ChipPro baseboard).
- Fi ẹrọ FPGA sii (gbọdọ badọgba si ChipPro SoM ti a mẹnuba ni igbesẹ iṣaaju) lati ṣe eto, sinu iho lori ChipPro SoM. Rii daju pe polarity ti ẹrọ FPGA ati iho ibaamu.
- So ipese agbara 12V si J5.
- So ibudo USB pọ sori oluṣeto FlashPro6 si PC, ni lilo okun USB ti a pese pẹlu oluṣeto.
- Darapọ mọ JTAG ibudo, lori FlashPro6 pirogirama, si ChipPro baseboard lilo J27 FlashPro akọsori lori baseboard.
- Tan SW1 yipada nipasẹ sisun.
- Ṣii sọfitiwia siseto FlashPro Express lori PC; lilö kiri ati ki o yan awọn yẹ siseto file lati ṣe eto ẹrọ naa.
Software ati asẹ
Bibẹrẹ lati idasilẹ Libero SoC v11.5, FlashPro Express tun ti fi sii gẹgẹbi apakan ti Libero SoC. Libero SoC nilo iwe-aṣẹ lati ṣẹda ati siseto ẹrọ naa. FlashPro Express Standalone tun wa bi apakan ti Siseto ati yokokoro irinṣẹ. Ko si awọn iwe-aṣẹ afikun ti o nilo fun sọfitiwia Standalone FlashPro Express.
Awọn orisun iwe
Fun alaye diẹ sii nipa ChipPro, ṣabẹwo si wa CP-PROG-BASE weboju-iwe.
Microchip FPGA Support
Ẹgbẹ awọn ọja Microchip FPGA ṣe atilẹyin awọn ọja rẹ pẹlu ọpọlọpọ awọn iṣẹ atilẹyin, pẹlu Iṣẹ alabara, Ile-iṣẹ Atilẹyin Imọ-ẹrọ Onibara, a webojula, ati ni agbaye tita ifiweranṣẹ.
A daba awọn alabara lati ṣabẹwo si awọn orisun ori ayelujara Microchip ṣaaju kikan si atilẹyin nitori o ṣee ṣe pupọ pe awọn ibeere wọn ti ni idahun tẹlẹ.
Kan si Technical Support Center nipasẹ awọn webojula ni www.microchip.com/support. Darukọ nọmba Apakan Ẹrọ FPGA, yan ẹka ọran ti o yẹ, ati apẹrẹ ikojọpọ files lakoko ṣiṣẹda ọran atilẹyin imọ-ẹrọ.
Kan si Iṣẹ Onibara fun atilẹyin ọja ti kii ṣe imọ-ẹrọ, gẹgẹbi idiyele ọja, awọn iṣagbega ọja, alaye imudojuiwọn, ipo aṣẹ, ati aṣẹ.
- Lati North America, pe 800.262.1060
- Lati iyoku agbaye, pe 650.318.4460
- Faksi, lati nibikibi ninu aye, 650.318.8044
Microchip Alaye
Microchip naa Webojula
Microchip pese atilẹyin ori ayelujara nipasẹ wa webojula ni www.microchip.com/. Eyi webojula ti wa ni lo lati ṣe files ati alaye awọn iṣọrọ wa si awọn onibara. Diẹ ninu akoonu ti o wa pẹlu:
- Atilẹyin Ọja – Awọn iwe data ati errata, awọn akọsilẹ ohun elo ati sample eto, oniru oro, olumulo ká itọsọna ati hardware support awọn iwe aṣẹ, titun software tu ati ki o gbepamo software
- Atilẹyin Imọ-ẹrọ Gbogbogbo - Awọn ibeere ti a beere nigbagbogbo (Awọn FAQ), awọn ibeere atilẹyin imọ-ẹrọ, awọn ẹgbẹ ijiroro lori ayelujara, atokọ awọn ọmọ ẹgbẹ eto alabaṣepọ apẹrẹ Microchip
- Iṣowo ti Microchip - Aṣayan ọja ati awọn itọsọna aṣẹ, awọn idasilẹ atẹjade Microchip tuntun, atokọ ti awọn apejọ ati awọn iṣẹlẹ, awọn atokọ ti awọn ọfiisi tita Microchip, awọn olupin kaakiri ati awọn aṣoju ile-iṣẹ
Ọja Change iwifunni Service
Iṣẹ ifitonileti iyipada ọja Microchip ṣe iranlọwọ lati jẹ ki awọn alabara wa lọwọlọwọ lori awọn ọja Microchip. Awọn alabapin yoo gba ifitonileti imeeli nigbakugba ti awọn ayipada ba wa, awọn imudojuiwọn, awọn atunyẹwo tabi errata ti o ni ibatan si ẹbi ọja kan tabi ohun elo idagbasoke ti iwulo.
Lati forukọsilẹ, lọ si www.microchip.com/pcn ki o si tẹle awọn ilana ìforúkọsílẹ.
Onibara Support
Awọn olumulo ti awọn ọja Microchip le gba iranlọwọ nipasẹ awọn ikanni pupọ:
- Olupin tabi Aṣoju
- Agbegbe Sales Office
- Onimọ-ẹrọ Awọn ojutu ti a fi sii (ESE)
- Oluranlowo lati tun nkan se
Awọn onibara yẹ ki o kan si olupin wọn, aṣoju tabi ESE fun atilẹyin. Awọn ọfiisi tita agbegbe tun wa lati ṣe iranlọwọ fun awọn alabara. Atokọ ti awọn ọfiisi tita ati awọn ipo wa ninu iwe yii.
Imọ support wa nipasẹ awọn webojula ni: www.microchip.com/support
Ẹya Idaabobo koodu Awọn ẹrọ Microchip
Ṣe akiyesi awọn alaye atẹle ti ẹya aabo koodu lori awọn ọja Microchip:
- Awọn ọja Microchip pade awọn pato ti o wa ninu Iwe Data Microchip pato wọn.
- Microchip gbagbọ pe ẹbi ti awọn ọja wa ni aabo nigba lilo ni ọna ti a pinnu, laarin awọn pato iṣẹ, ati labẹ awọn ipo deede.
- Awọn iye Microchip ati ibinu ṣe aabo awọn ẹtọ ohun-ini ọgbọn rẹ. Awọn igbiyanju lati irufin awọn ẹya aabo koodu ti ọja Microchip jẹ eewọ muna ati pe o le rú Ofin Aṣẹ-lori Ẹgbẹrun Ọdun Digital.
- Bẹni Microchip tabi eyikeyi olupese semikondokito miiran le ṣe iṣeduro aabo koodu rẹ. Idaabobo koodu ko tumọ si pe a n ṣe iṣeduro ọja naa jẹ “aibikita”.
Idaabobo koodu ti wa ni idagbasoke nigbagbogbo. Microchip ti pinnu lati ni ilọsiwaju nigbagbogbo awọn ẹya aabo koodu ti awọn ọja wa.
Ofin Akiyesi
Atẹjade yii ati alaye ti o wa ninu rẹ le ṣee lo pẹlu awọn ọja Microchip nikan, pẹlu lati ṣe apẹrẹ, idanwo, ati ṣepọ awọn ọja Microchip pẹlu ohun elo rẹ. Lilo alaye yii ni ọna miiran ti o lodi si awọn ofin wọnyi. Alaye nipa awọn ohun elo ẹrọ ti pese fun irọrun rẹ nikan ati pe o le rọpo nipasẹ awọn imudojuiwọn. O jẹ ojuṣe rẹ lati rii daju pe ohun elo rẹ ni ibamu pẹlu awọn pato rẹ. Kan si ọfiisi tita Microchip agbegbe rẹ fun atilẹyin afikun tabi, gba atilẹyin afikun ni www.microchip.com/en-us/support/design-help/client-support-services.
ALAYE YI NI MICROCHIP “BI O SE WA”. MICROCHIP KO SE Aṣoju TABI ATILẸYIN ỌJA TI IRU KANKAN BOYA KIAKIA TABI TỌRỌ, KỌ TABI ẹnu, Ilana tabi Bibẹkọkọ, ti o jọmọ ALAYE NAA SUGBON KO NI LOPIN SI KANKAN, LATI IKILỌ ỌRỌ, ÀTI IFỌRỌWỌRỌ FUN IDI PATAKI, TABI ATILẸYIN ỌJA TO JEmọ MAJEMU, Didara, TABI Iṣe Rẹ.
LAISI iṣẹlẹ ti yoo ṣe oniduro fun eyikeyi aiṣedeede, PATAKI, ijiya, ijamba, tabi ipadanu, bibajẹ, iye owo, tabi inawo ti eyikeyi iru ohunkohun ti o jọmọ si awọn alaye tabi ti o ti gba, ti o ba ti lo, Ti a gbaniyanju nipa Seese TABI awọn bibajẹ ni o wa tẹlẹ. SI AWỌN NIPA NIPA NIPA TI OFIN, LAPAPA LAPAPO MICROCHIP LORI Gbogbo awọn ẹtọ ni eyikeyi ọna ti o jọmọ ALAYE TABI LILO RE KO NI JU OPO ỌWỌ, TI O BA KAN, PE O TI ṢAN NIPA TODAJU SIROMỌ.
Lilo awọn ẹrọ Microchip ni atilẹyin igbesi aye ati/tabi awọn ohun elo aabo jẹ patapata ni ewu olura, ati pe olura gba lati daabobo, ṣe idalẹbi ati dimu Microchip ti ko lewu lati eyikeyi ati gbogbo awọn bibajẹ, awọn ẹtọ, awọn ipele, tabi awọn inawo ti o waye lati iru lilo. Ko si awọn iwe-aṣẹ ti a gbe lọ, laisọtọ tabi bibẹẹkọ, labẹ eyikeyi awọn ẹtọ ohun-ini imọ Microchip ayafi bibẹẹkọ ti sọ.
Awọn aami-išowo
Orukọ Microchip ati aami, aami Microchip, Adaptec, AVR, AVR logo, AVR Freaks, BestTime, BitCloud, CryptoMemory, CryptoRF, dsPIC, flexPWR, HELDO, IGLOO, JukeBlox, KeeLoq, Kleer, LANCheck, LinkMD, maXSty MediaLB, megaAVR, Microsemi, Microsemi logo, MOST, MOST logo, MPLAB, OptoLyzer, PIC, picoPower, PICSTART, logo PIC32, PolarFire, Prochip Designer, QTouch, SAM-BA, Segenuity, SpyNIC, SST, SST Logo, SuperFlash, Symmetricom , SyncServer, Tachyon, TimeSource, tinyAVR, UNI/O, Vectron, ati XMEGA jẹ aami-išowo ti a forukọsilẹ ti Microchip Technology Incorporated ni AMẸRIKA ati awọn orilẹ-ede miiran.
AgileSwitch, APT, ClockWorks, Ile-iṣẹ Awọn Solusan Iṣakoso ti a fi sinu, EtherSynch, Flashtec, Iṣakoso Iyara Hyper, Load HyperLight, Libero, motorBench, mTouch, Powermite 3, Edge Precision, ProASIC, ProASIC Plus, ProASIC Plus logo, Idakẹjẹ- Waya, SmartFusion, SyncWorld, Temux, TimeCesium, TimeHub, TimePictra, TimeProvider, TrueTime, ati ZL jẹ aami-išowo ti a forukọsilẹ ti Microchip Technology Incorporated ni AMẸRIKA
Imukuro Bọtini nitosi, AKS, Analog-fun-The-Digital Age, Eyikeyi Kapasito, AnyIn, AnyOut, Yipada Augmented, BlueSky, BodyCom, Clockstudio, CodeGuard, CryptoAuthentication, CryptoAutomotive, CryptoCompanion, CryptoController, dsPICDEM, dsPImicnatching, MatchAtchingnet. DAM, ECAN, Espresso T1S, EtherGREEN, GridTime, IdealBridge, In-Circuit Serial Programming, ICSP, INICnet, Ti o jọra oye, IntelliMOS, Inter-Chip Asopọmọra, JitterBlocker, Knob-on-Display, KoD, maxCrypto, maxView, memBrain, Mindi, MiWi, MPASM, MPF, MPLAB aami ifọwọsi, MPLIB, MPLINK, MultiTRAK, NetDetach, Omniscient Code Generation, PICDEM, PICDEM.net,
PICkit, PICtail, PowerSmart, PureSilicon, QMatrix, GIDI yinyin, Ripple Blocker, RTAX, RTG4, SAMICE, Serial Quad I/O, simpleMAP, SimpliPHY, SmartBuffer, SmartHLS, SMART-IS, storClad, SQI, SuperSwitcher,
SuperSwitcher II, Switchtec, SynchroPHY, Apapọ Ifarada, Akoko igbẹkẹle, TSHARC, USBCheck, VariSense, VectorBlox, VeriPHY, ViewSpan, WiperLock, XpressConnect, ati ZENA jẹ aami-iṣowo ti Microchip Technology Incorporated ni AMẸRIKA ati awọn orilẹ-ede miiran.
SQTP jẹ aami iṣẹ ti Microchip Technology Incorporated ni AMẸRIKA
Aami Adaptec, Igbohunsafẹfẹ lori Ibeere, Imọ-ẹrọ Ibi ipamọ Silicon, ati Symmcom jẹ aami-išowo ti a forukọsilẹ ti Microchip Technology Inc. ni awọn orilẹ-ede miiran.
GestIC jẹ aami-iṣowo ti a forukọsilẹ ti Microchip Technology Germany II GmbH & Co.KG, oniranlọwọ ti Microchip Technology Inc., ni awọn orilẹ-ede miiran.
Gbogbo awọn aami-iṣowo miiran ti a mẹnuba ninu rẹ jẹ ohun-ini ti awọn ile-iṣẹ wọn.
© 2024, Microchip Technology Incorporated ati awọn ẹka rẹ. Gbogbo awọn ẹtọ wa ni ipamọ.
ISBN:
Didara Management System
Fun alaye nipa Awọn ọna iṣakoso Didara Microchip, jọwọ ṣabẹwo www.microchip.com/quality.
Ni agbaye Titaja ati Service
| AMERIKA | ASIA/PACIFIC | ASIA/PACIFIC | EUROPE |
| Ajọ Ọfiisi
2355 West Chandler Blvd. |
Australia – Sydney Tẹli: 61-2-9868-6733 Ilu China - Ilu Beijing Tẹli: 86-10-8569-7000 China – Chengdu Tẹli: 86-28-8665-5511 China – Chongqing Tẹli: 86-23-8980-9588 China – Dongguan Tẹli: 86-769-8702-9880 China – Guangzhou Tẹli: 86-20-8755-8029 China – Hangzhou Tẹli: 86-571-8792-8115 China – Hong Kong SAR Tẹli: 852-2943-5100 China – Nanjing Tẹli: 86-25-8473-2460 China – Qingdao Tẹli: 86-532-8502-7355 China – Shanghai Tẹli: 86-21-3326-8000 China - Shenyang Tẹli: 86-24-2334-2829 China – Shenzhen Tẹli: 86-755-8864-2200 China – Suzhou Tẹli: 86-186-6233-1526 China – Wuhan Tẹli: 86-27-5980-5300 China – Xian Tẹli: 86-29-8833-7252 China – Xiamen Tẹli: 86-592-2388138 China – Zhuhai Tẹli: 86-756-3210040 |
India – Bangalore Tẹli: 91-80-3090-4444 India – New Delhi Tẹli: 91-11-4160-8631 India - Pune Tẹli: 91-20-4121-0141 Japan - Osaka Tẹli: 81-6-6152-7160 Japan – Tokyo Tẹli: 81-3-6880-3770 Koria – Daegu Tẹli: 82-53-744-4301 Korea – Seoul Tẹli: 82-2-554-7200 Malaysia – Kuala Lumpur Tẹli: 60-3-7651-7906 Malaysia - Penang Tẹli: 60-4-227-8870 Philippines – Manila Tẹli: 63-2-634-9065 Singapore Tẹli: 65-6334-8870 Taiwan – Hsin Chu Tẹli: 886-3-577-8366 Taiwan – Kaohsiung Tẹli: 886-7-213-7830 Taiwan – Taipei Tẹli: 886-2-2508-8600 Thailand - Bangkok Tẹli: 66-2-694-1351 Vietnam - Ho Chi Minh Tẹli: 84-28-5448-2100 |
Austria – Wels Tẹli: 43-7242-2244-39 Faksi: 43-7242-2244-393 Denmark – Copenhagen Tẹli: 45-4485-5910 Faksi: 45-4485-2829 Finland – Espoo Tẹli: 358-9-4520-820 Faranse - Paris Tel: 33-1-69-53-63-20 Fax: 33-1-69-30-90-79 Jẹmánì – Garching Tẹli: 49-8931-9700 Jẹmánì – Han Tẹli: 49-2129-3766400 Jẹmánì – Heilbronn Tẹli: 49-7131-72400 Jẹmánì – Karlsruhe Tẹli: 49-721-625370 Jẹmánì – München Tel: 49-89-627-144-0 Fax: 49-89-627-144-44 Jẹmánì – Rosenheim Tẹli: 49-8031-354-560 Israeli - Ra'anana Tẹli: 972-9-744-7705 Italy – Milan Tẹli: 39-0331-742611 Faksi: 39-0331-466781 Italy – Padova Tẹli: 39-049-7625286 Netherlands - Drunen Tẹli: 31-416-690399 Faksi: 31-416-690340 Norway – Trondheim Tẹli: 47-72884388 Poland - Warsaw Tẹli: 48-22-3325737 Romania – Bucharest Tel: 40-21-407-87-50 Spain – Madrid Tel: 34-91-708-08-90 Fax: 34-91-708-08-91 Sweden – Gothenberg Tel: 46-31-704-60-40 Sweden – Dubai Tẹli: 46-8-5090-4654 UK – Wokingham Tẹli: 44-118-921-5800 Faksi: 44-118-921-5820 |
Awọn iwe aṣẹ / Awọn orisun
 |
MICROCHIP CP-PROG-BASE ChipPro FPGA Device Programmer [pdf] Itọsọna olumulo CP-PROG-BASE, CP-PROG-BASE ChipPro FPGA Device Programmer, ChipPro FPGA Device Programmer, FPGA Device Programme, Device Programme |
