PWM-120-12 Series Constant Voltage PWM O wu LED Driver
“
Awọn pato:
- Awoṣe: PWM-120-12, PWM-120-24, PWM-120-36, PWM-120-48
- DC Voltage: 12V, 24V, 36V, 48V
- Ti won won Lọwọlọwọ: 10A, 5A, 3.4A, 2.5A
- Agbara ti a ṣe iwọn: 120W (fun gbogbo awọn awoṣe)
- Iwọn Dimming: 0 - 100%
- Igbohunsafẹfẹ PWM: 1.47kHz fun Òfo/DA-Iru, 2.5kHz fun
DA2-Iru - Eto, Aago dide: 500ms, 80ms
- Voltage Ibiti: 90 - 305VAC, 127 - 431VDC
- Iwọn Igbohunsafẹfẹ: 47 - 63Hz
- Okunfa agbara: PF>0.97/115VAC, PF>0.96/230VAC,
PF> 0.93 / 277VAC @ kikun fifuye - Lapapọ Idarudapọ ti irẹpọ: THD<20%
- Ṣiṣe: 88.5% - 90%
- O pọju. No. ti PSUs lori 16A Circuit Breaker: 4 units (circuit
fifọ ti iru B) / 6 sipo (Circuit fifọ iru C) ni
230VAC
Awọn ilana Lilo ọja:
1. Fifi sori ẹrọ:
- Rii daju pe agbara titẹ sii baamu iwọn titẹ AC ti a sọ
fun awoṣe rẹ.
– So awọn LED iwakọ si awọn yẹ voltage orisun ati
rii daju didasilẹ to dara.
2. Dimming:
- Ṣatunṣe iwọn dimming lati 0 si 100% gẹgẹ bi itanna rẹ
awọn ibeere.
– Lo eto ipo igbohunsafẹfẹ PWM ti a sọ fun aipe
išẹ.
3. Aabo Itanna:
- Tẹle gbogbo awọn itọnisọna ailewu itanna ti o yẹ ati
awọn ilana nigba fifi sori ẹrọ ati lilo awakọ LED.
- Maṣe kọja nọmba ti o pọ julọ ti PSU lori fifọ Circuit kan
lati yago fun apọju.
FAQ:
Q: Kini MO le ṣe ti awakọ LED ko ba ṣiṣẹ?
A: Ṣayẹwo asopọ agbara titẹ sii ki o rii daju pe voltage
orisun ni laarin awọn pàtó kan ibiti.
Q: Ṣe MO le so awọn LED pupọ pọ si awakọ kan?
A: A ṣe iṣeduro lati tẹle awọn itọnisọna olupese lori
awọn ti o pọju nọmba ti LED ti o le wa ni ti sopọ si kan nikan iwakọ
lati rii daju pe iṣẹ ṣiṣe to dara ati gigun gigun ti awọn LED.
“`
120W Ibakan Voltage PWM O wu LED Driver
PWM-120 jara
Itọsọna olumulo
2
(fun DA2-Iru nikan)
Iṣagbewọle AC: 100-240Vac (fun DA2-Iru nikan)
IP67
WA 15885
TOMASAMUẸLI
TOMASAMUẸLI
05
ayafi 12DA iru
Ti gba lati ayelujara lati Arrow.com.
File Orukọ: PWM-120-SPEC 2024-09-25
120W PWM O wu LED Driver
PWM-120 jara
PATAKI
AṢE
PWM-120-12
PWM-120-24
PWM-120-36
PWM-120-48
DC VOLTAGE
12V
24V
36V
Ti won won lọwọlọwọ
10A
5A
3.4A
AGBARA TI WON
120W
120W
122.4W
IJADE
DIMMING ibiti o
0 ~ 100%
Igbohunsafẹfẹ PWM (Iru.) 1.47kHz fun òfo/DA-Iru, 2.5kHz fun DA2-Iru
Eto, DIDE Akoko
Akiyesi.2 Akiyesi.9
500ms, 80ms / 230VAC tabi 115VAC
Àkókò ṢE (Iru.) 16ms/230VAC tabi 115VAC
VOLTAGE RANGE AKIYESI.3
90 ~ 305VAC 127 ~ 431VDC (Jọwọ tọka si apakan “SATIC CHARACTERISTIC”)
Iwọn Igbohunsafẹfẹ 47 ~ 63Hz
FACTOR AGBARA (Iru.)
PF>0.97/115VAC, PF>0.96/230VAC, PF>0.93/277VAC @ fifuye kikun (Jọwọ tọka si apakan “AGBARA FACTOR (PF) HARACTERISTIC”)
48V 2.5A 120W
Àpapọ̀ ìrẹ́pọ̀
THD< 20%(@load60%/115VAC, 230VAC; @load75%/277VAC) (Jọwọ tọka si apakan “Apapọ HARMONIC DISTORTION”)
ÀWỌN Ọ̀RỌ̀
AGBARA (Iru.)
88.5%
90%
90%
AC lọwọlọwọ (Iru.)
1.3A / 115VAC 0.65A / 230VAC 0.55A / 277VAC
INRUSH lọwọlọwọ (Iru.) Ibẹrẹ tutu 60A (iwọn = 520s ti a wọn ni 50% Ipeak) ni 230VAC; Fun NEMA 410
90.5%
MAX. RARA. ti PSUs lori 16A CIRCUIT BREAKER
Awọn ẹya 4 (olufọkasi ti iru B) / awọn ẹya 6 (fifọ iru C) ni 230VAC
Isọjade lọwọlọwọ
<0.25mA / 277VAC
KO fifuye/Iduroṣinṣin agbara agbara
Ko si agbara agbara fifuye <0.5w fun iru ofo; agbara agbara imurasilẹ <0.5W fun iru DA/Iru DA2
APOJU
108 ~ 130% ti a ṣe iwọn agbara iṣelọpọ ipo Hiccup, gba pada laifọwọyi lẹhin ti o ti yọ ipo aṣiṣe kuro
IDAABOBO AGBAYE KURO
LORI VOLTAGE
Ipo hiccup 12V/24V ati ipo 36V/48V tiipa (pẹlu DA-Iru / ayafi fun DA2-Iru) Ipo hiccup, ṣe atunṣe laifọwọyi lẹhin ti o ti yọ ipo aṣiṣe kuro (nikan fun iru DA2)
15 ~ 17V
28 ~ 34V
41 ~ 46V
54 ~ 60V
Pa o/p voltage, tun-agbara lati bọsipọ
LORI IGBAGBÜ Pa o/p voltage, tun-agbara lati bọsipọ
IDANWO SISE.
Tcase = -40 ~ +90 (Jọwọ tọka si "OUTPUT LOAD vs TEMPERATURE" apakan)
MAX. ÌṢẸ́ ỌJỌ́.
Tcase=+90
Ayika SISE ọriniinitutu
20 ~ 95% RH ti kii ṣe idapọmọra
ÌGBÀ ÌṢÍJỌ́., Ọ̀RỌ̀ -40 ~ +80, 10 ~ 95% RH
TEMP. ALAGBARA
± 0.03% / (0 ~ 45, ayafi 0 ~ 40 fun 12V)
VIBRATION
10 ~ 500Hz, 5G 12min./1cycle, akoko fun 72min. kọọkan pẹlú X, Y, Z ãke
UL8750 (iru "HL") (ayafi fun iru 12DA), CSA C22.2 No. 250.13-12; ENEC BS EN/EN61347-1, BS EN/EN61347-2-13,
AABO awọn ajohunše
Akiyesi.5
BS EN/EN62384 ominira, IP67, BIS IS 15885 (Apá 2/Sec13) (fun 12,24 Òfo ati DA2 Iru), EAC TP TC 004, GB19510.1, GB19510.14 fọwọsi; Oniru tọka si BS EN / EN60335-1; Ni ibamu si BS EN / EN61347-2-13
àfikún J ti o dara fun awọn fifi sori ẹrọ pajawiri (EL) (Input AC: 100-240Vac) (fun DA2-Iru nikan)
DALI awọn ajohunše
IEC62386-101, 102, 207,251 fun DA/DA2-Iru nikan, Ẹrọ iru 6(DT6)
AABO & FOJUTO VOLTAGEI/PO/P:3.75KVAC; I/P-DA:1.5KVAC; O/P-DA:1.5KVAC
EMC
ÌDÁJỌ́ ÌYÁNṢẸ I/PO/P:100M Ohms / 500VDC / 25/ 70% RH
EMC EMISSION Akiyesi.6 EMC ajesara
Ibamu si BS EN/EN55015, BS EN/EN61000-3-2 Kilasi C (@load60%); BS EN/EN61000-3-3,GB/T 17743, GB17625.1;EAC TP TC 020
Ibamu si BS EN/EN61000-4-2,3,4,5,6,8,11; BS EN/EN61547, ipele ile-iṣẹ ina (laini-laini ajesara 2KV), EAC TP TC 020
MTBF DIMENSION MIIRAN
2243.7K wakati min. Telcordia SR-332 (Bellcore); 191*63*37.5mm (L*W*H)
228.7K wakati min. MIL-HDBK-217F (25)
Iṣakojọpọ
0.97Kg; 15pcs / 15.6Kg / 0.87CUFT
1. Gbogbo awọn paramita NOT ti a mẹnuba pataki ni a wọn ni titẹ sii 230VAC, ti a ṣe iwọn lọwọlọwọ ati 25 ti iwọn otutu ibaramu.
AKIYESI 2. De-Rating le nilo labẹ kekere input voltages. Jọwọ tọkasi awọn apakan “APAMỌ IBI” fun awọn alaye. 3. Gigun akoko iṣeto ni a ṣe iwọn ni ibẹrẹ tutu akọkọ. Titan/PA awakọ le ja si ilosoke akoko iṣeto.
4. A ṣe akiyesi awakọ naa gẹgẹbi paati ti yoo ṣiṣẹ ni apapo pẹlu ohun elo ikẹhin. Niwọn igba ti iṣẹ EMC yoo kan
nipasẹ fifi sori ẹrọ pipe, awọn aṣelọpọ ohun elo ti o kẹhin gbọdọ tun ṣe deede Ilana EMC lori fifi sori ẹrọ pipe lẹẹkansi.
(bi o wa lori https://www.meanwell.com//Upload/PDF/EMI_statement_en.pdf) 5. Yi jara pàdé awọn aṣoju aye ireti> 50,000 wakati ti isẹ nigba ti Tcase, paapa tc ojuami (tabi TMP, fun DLC), jẹ nipa 75 tabi kere si.
6. Jọwọ tọka si alaye atilẹyin ọja lori MEAN WELL's webAaye ni http://www.meanwell.com 7. Ibaramu otutu derating ti 3.5/1000m pẹlu fanless si dede ati ti 5/1000m pẹlu àìpẹ si dede fun awọn ọna giga ju 2000m(6500ft).
8. Fun eyikeyi akọsilẹ ohun elo ati iṣẹ iṣeduro fifi sori omi IP omi, jọwọ tọka itọnisọna olumulo wa ṣaaju lilo.
https://www.meanwell.com/Upload/PDF/LED_EN.pdf
9. Da lori IEC 62386-101 / 102 DALI agbara lori akoko ati awọn ilana idalọwọduro, akoko iṣeto nilo lati ṣe idanwo pẹlu oluṣakoso DALI eyiti o le ṣe atilẹyin fun agbara DALI lori iṣẹ, bibẹẹkọ akoko iṣeto yoo ga ju 0.5 keji fun DA oriṣi.
Ifijiṣẹ Layabiliti Ọja Fun alaye alaye, jọwọ tọka si https://www.meanwell.com/serviceDisclaimer.aspx
Ti gba lati ayelujara lati Arrow.com.
File Orukọ: PWM-120-SPEC 2024-09-25
120W PWM O wu LED Driver
DIMMING isẹ
PWM-120 jara
AC/L(Brown) AC/N(bulu)
PWM-120
Ilana dimming fun iṣelọpọ ara PWM Dimming jẹ aṣeyọri nipasẹ yiyatọ iwọn iṣẹ-ṣiṣe ti lọwọlọwọ iṣelọpọ.
O wu DC lọwọlọwọ ON
Io=0A
PA TON
T
DIM+(Eleyiyi)* DIM-(Pinki)** +V(Pupa)(Brown fun DA-Iru) -V(dudu)(Buluu fun iru DA)
* DIM + fun òfo-Iru DA + fun DA / DA2-Iru
* *DIM- fun Òfo-Iru DA- fun DA/DA2-Iru
TON
Ojuse ọmọ (%) =
×100%
T
Igbohunsafẹfẹ PWM jade: 1.47kHz fun òfo/DA-Iru 2.5kHz fun DA2-Iru
3 ni iṣẹ dimming 1 (fun Irú Òfo)
Waye ọkan ninu awọn ilana mẹta laarin DIM+ ati DIM-: 0 ~ 10VDC, tabi 10V PWM ifihan agbara tabi resistance. Dimming orisun lọwọlọwọ lati ipese agbara: 100A (iru.)
Ohun elo afikun 0 ~ 10VDC
+V +
Awọn ila LED
-V DIM +
DIM-
–
+ Afikun Voltage
–
MAA ṢE so "DIM- si -V"
+ -
10%
0.15%
0.6V 1V
Iyipo iṣẹ ti iṣelọpọ lọwọlọwọ (%)
100% 90% 80% 70% 60% 50% 40% 30% 20% 10% 0%
0V 1V 2V 3V 4V 5V 6V 7V 8V 9V 10V Iṣagbewọle Dimming: Fikun voltage
Lilo ifihan agbara 10V PWM afikun (iwọn igbohunsafẹfẹ 100Hz ~ 3KHz):
+V +
Awọn ila LED
-V DIM +
DIM-
Fikun ifihan PWM
MAA ṢE so "DIM- si -V"
+ -
10% 0.15%
6% 10%
Iyipo iṣẹ ti iṣelọpọ lọwọlọwọ (%)
100% 90% 80% 70% 60% 50% 40% 30% 20% 10%
0% 10% 20% 30% 40% 50% 60% 70% 80% 90% 100% Ojuse ti afikun 10V PWM ifihan agbara dimming input
Ti gba lati ayelujara lati Arrow.com.
File Orukọ: PWM-120-SPEC 2024-09-25
120W PWM O wu LED Driver
PWM-120 jara
Lilo resistance aropo:
+V +
Awọn ila LED
-V DIM +
DIM-
Àfikún Resistance
MAA ṢE so "DIM- si -V"
+ -
10% 0.15%
6K/N 10K/N
Iyipo iṣẹ ti iṣelọpọ lọwọlọwọ (%)
100% 90% 80% 70% 60% 50% 40% 30% 20% 10%
0% kukuru
10K/N 20K/N 30K/N 40K/N 50K/N 60K/N 70K/N 80K/N 90K/N 100K/N (N = opoiye awakọ fun amuṣiṣẹpọ dimmingoperation)
titẹ sii dimming: Afikun resistance
Akiyesi: 1. Min. Ojuse ọmọ ti o wu lọwọlọwọ jẹ nipa 0.15%, ati awọn dimming input jẹ nipa 6K tabi 0.6VDC, tabi 10V PWM ifihan agbara pẹlu 6% ojuse ọmọ. 2. Iyika iṣẹ ti o wu lọwọlọwọ le lọ silẹ si 0% nigbati titẹ sii dimming kere ju 6K tabi kere si 0.6VDC, tabi 10V PWM ifihan agbara pẹlu iṣẹ-ṣiṣe ti o kere ju 6%.
DALI Interface (primary ẹgbẹ; fun DA / DA2-Iru) Waye Dali ifihan agbara laarin DA + ati DA-. Ilana DALI ni awọn ẹgbẹ 16 ati awọn adirẹsi 64 ni. Igbese akọkọ jẹ ti o wa titi ni 0.2% ti iṣelọpọ
Ti gba lati ayelujara lati Arrow.com.
File Orukọ: PWM-120-SPEC 2024-09-25
Fifuye (%)
120W PWM O wu LED Driver
O wu fifuye vs otutu
PWM-120 jara
100
80 230VAC Igbewọle nikan
60 50 40
20
12V nikan
-40 -25
0
15
30
40 45 50
60
IRU otutu ibaramu, Ta ()
70 (petele)
Fifuye (%)
100
80 230VAC Igbewọle nikan
60
40
20
-40 -25
20
45
65
75
85
90 (petele)
Tcase ()
ÀWỌN ÀWỌN ÌSÌN
100 90 80 70 60 50 40
90 100 125 135 145 155 165 175 180 200 230 305
IPIN iwọleTAGE (V) 60Hz De-Rating wa ni ti nilo labẹ kekere input voltage.
PATAKI HARMONIC lapapọ (THD)
48V Awoṣe, Tcase ni 80
30%
25%
20%
277VAC
15%
230VAC
115VAC
10%
5%
0%
50%
60%
70%
80%
90%
100%
GBIGBE
IṢẸ́(%)
PF
AGBARA FACTOR (PF) abuda
Apejọ ni 80
1 .0 0 0 .9 5 0 .9 0 0 .8 5 0 .8 0 0 .7 5 0 .7 0 0 .6 5 0 .6 0 0 .5 5 0 .5 0 .0 4 5 . 0 4 0 .0 3 5 .0 3
10%
20%
30%
40%
50%
60%
70%
80%
90% 100% (75W)
GBIGBE
277V 230V 115V
AGBARA vs fifuye
PWM-120 jara ni iṣẹ ṣiṣe ti o ga julọ ti o to 90.5% le de ọdọ awọn ohun elo aaye. 48V Awoṣe, Tcase ni 80
92 91 90 89 88 87 86 85 84 83 82 81
10% 20% 30% 40% 50% 60% 70% 80% 90% 100%
277V 230V 115V
GBIGBE
IKÚN THD (%)
Ti gba lati ayelujara lati Arrow.com.
File Orukọ: PWM-120-SPEC 2024-09-25
120W PWM O wu LED Driver
PWM-120 jara
AKIYESI AYE
ASIKO AYE(Kh)
120
100
80
60
40
20
0
20
30
40
50
60
70
80
90
Tcase()
Ti gba lati ayelujara lati Arrow.com.
File Orukọ: PWM-120-SPEC 2024-09-25
120W PWM O wu LED Driver
PWM-120 jara
Àkọsílẹ aworan atọka
EMI Ajọ
I / P
&
RIFIFIERS
PFC CIRCUIT
AGBARA Yipada
OTP
OLP
PWM & PFC Iṣakoso
Awọn olupilẹṣẹ &
FILE
PFC fosc: 50 ~ 120KHz PWM fosc: 60 ~ 130KHz
OLP
DIMMING CIRCUIT
IRCUIT Iwari
+V -V DIM+ DIM-
OVP
Mechanical Specification
Òfo-Iru
Ọran No.. PWM-120
Unit: mm Ifarada: ± 1
300 ± 20
AC/L(Brown) AC/N(bulu)
50± 3 SJTW 18AWG×2C
5
191 5
63 31.5
2-4.5
T irú tc
95.5
5
tc: o pọju. Case otutu
5
300 ± 20
UL2464 18AWG×2C SJTW 14AWG×2C 50±3
DIM+(Eleyika) DIM-(Pinki) +V(Pupa) -V(dudu)
37.5
3
DA / DA2-Iru
300 ± 20
AC/L(Brown) AC/N(bulu)
50 ± 3
SJOW 17AWG×2C &H05RN-F 1.0mm2
5
191 5
63 31.5
2-4.5
T irú tc
95.5
5
tc: o pọju. Case otutu
5
300±20 UL2464 18AWG×2C SWOW 17AWG×2C 50±3 &H05RN-F 1.0mm2
DA+(Eleyi ti) DA-(Pinki) +V(Brown) -V(Buluu)
37.5
3
Ti gba lati ayelujara lati Arrow.com.
File Orukọ: PWM-120-SPEC 2024-09-25
120W PWM O wu LED Driver
So Iṣagbesori Itọsọna
Fifi sori Afowoyi Asopọ fun òfo-Iru
PWM-120 jara
AC/L(brown) AC/N(buluu)
DIM-(P-INK) +
DIM+(PIPLE)
-V(BLACK) +
+V(RED)
0 ~ 10Vdc tabi 10V PWM tabi resistance Dimmer tabi DALI Dimmer
LED rinhoho
Awọn iṣọra Ṣaaju ki o to bẹrẹ eyikeyi fifi sori ẹrọ tabi iṣẹ itọju, jọwọ ge asopọ ipese agbara lati inu ohun elo naa. Rii daju
pe ko le tun sopọ lairotẹlẹ! Jeki fentilesonu to dara ni ayika ẹyọ naa ki o ma ṣe gbe nkan kankan sori rẹ. Tun kan 10-15 cm kiliaransi gbọdọ wa ni pa nigbati
ẹrọ ti o wa nitosi jẹ orisun ooru. Iṣalaye iṣagbesori miiran ju iṣalaye boṣewa tabi ṣiṣẹ labẹ iwọn otutu ibaramu giga le pọ si
ti abẹnu paati otutu ati ki o yoo beere a de-rating ni o wu lọwọlọwọ. Iwọn lọwọlọwọ ti okun alakọbẹrẹ/atẹle ti a fọwọsi yẹ ki o tobi ju tabi dọgba si ti ẹyọ naa. Jọwọ tọkasi
si awọn oniwe-sipesifikesonu. Fun awọn awakọ LED pẹlu awọn asopọ ti ko ni omi, rii daju pe ọna asopọ laarin ẹyọ ati imuduro ina jẹ
ṣinṣin ki omi ko le wọ inu eto naa. Fun awọn awakọ LED dimmable, rii daju pe oludari dimming rẹ ni agbara lati wakọ awọn iwọn wọnyi.PWM jara
beere 0.15mA kọọkan kuro. Iye ti o ga julọ ti Tc. ti wa ni idanimọ lori aami ọja. Jọwọ rii daju pe iwọn otutu ti aaye Tc kii yoo kọja opin. MAA ṢE so "DIM- si -V" pọ. Dara fun lilo inu ile tabi ita gbangba laisi ifihan oorun taara. Jọwọ yago fun ibọmi ninu omi ju ọgbọn ọgbọn lọ
iseju. Ipese agbara ni a gba bi paati ti yoo ṣiṣẹ ni apapo pẹlu ohun elo ikẹhin. Niwon EMC
iṣẹ ṣiṣe yoo ni ipa nipasẹ fifi sori ẹrọ pipe, awọn aṣelọpọ ohun elo ikẹhin gbọdọ tun ṣe deede Ilana EMC lori fifi sori ẹrọ pipe lẹẹkansi.
Ti gba lati ayelujara lati Arrow.com.
File Orukọ: PWM-120-SPEC 2024-09-25
Awọn iwe aṣẹ / Awọn orisun
 |
ITUMO-daradara PWM-120-12 Series Constant Voltage PWM O wu LED Driver [pdf] Afọwọkọ eni PWM-120-12, PWM-120-24, PWM-120-36, PWM-120-48, PWM-120-12 Series Constant Voltage PWM O wu LED Driver, PWM-120-12 Series, Constant Voltage PWM O wu LED Driver, Voltage PWM Iwakọ Iwakọ LED, Awakọ LED Ijade PWM, Awakọ LED Ijade, Awakọ LED |