PWM-120-12 Ibakan Voltage PWM O wu KNX LED Driver
“
Awọn pato ọja
| AṢE | DC VOLTAGE | Ti won won lọwọlọwọ | AGBARA TI WON | DIMMING ibiti o | IJADE |
|---|---|---|---|---|---|
| PWM-120-12 | 12V | 10A | 120W | 0 ~ 100% | PWM O wu KNX LED Driver |
| PWM-120-24 | 24V | 5A | 120W | 0 ~ 100% | PWM O wu KNX LED Driver |
Awọn ilana Lilo ọja
Fifi sori ẹrọ
1. Rii daju pe agbara titẹ sii wa laarin vol ti pàtó kantage ibiti
(90-305VAC, 127-431VDC).
2. So awọn iwakọ si awọn LED ina eto awọn wọnyi ni
polarity ti o tọ.
Dimming Eto
1. Lo software ETS lati ṣatunṣe igbohunsafẹfẹ PWM laarin awọn
ibiti o ti 200-4000Hz.
2. Dimming ibiti a le ṣeto lati 0% si 100% gẹgẹbi itanna rẹ
awọn ibeere.
Isakoso agbara
1. Awakọ naa ni ipin agbara ti PF> 0.97/115VAC,
PF>0.96/230VAC, PF>0.94/277VAC ni kikun fifuye.
2. Lapapọ ti irẹpọ iparun ti wa ni itọju ni isalẹ 20% labẹ
pàtó kan fifuye awọn ipo.
Awọn iṣọra Aabo
1. Maa ko koja awọn ti o pọju nọmba ti PSU laaye lori kan Circuit
fifọ lati yago fun apọju.
2. Tẹle to dara grounding ati onirin ise nigba
fifi sori ẹrọ lati yago fun awọn ewu ina mọnamọna.
Awọn Ibeere Nigbagbogbo (FAQ)
Q: Le dimming ibiti o wa ni titunse lori PWM-120-KN LED
awako?
A: Bẹẹni, iwọn dimming le ṣe atunṣe lati 0% si 100% lilo
ibaramu software.
Q: Kini ni aṣoju ṣiṣe ti PWM-120-KN
awako?
A: Iṣe deede jẹ 88.5% fun awoṣe 12V ati 90% fun
24V awoṣe.
Q: Bawo ni ọpọlọpọ awọn sipo ti PWM-120-KN awakọ le ti wa ni ti sopọ si a
apanirun Circuit?
A: O le sopọ si awọn ẹya mẹrin 4 pẹlu fifọ Circuit ti iru
B tabi to awọn sipo 6 pẹlu fifọ Circuit iru C ni 230VAC.
“`
PWM-120-KN 120W Ibakan Voltage PWM O wu KNX LED Driver
jara
Itọsọna olumulo
05
.%
File Orukọ: PWM-120-KN-SPEC 2024-03-12
120W PWM O wu KNX LED Driver
PWM-120-KN jara
PATAKI
AṢE
PWM-120-12
PWM-120-24
DC VOLTAGE
12V
24V
Ti won won lọwọlọwọ
10A
5A
AGBARA TI WON
120W
120W
DIMMING ibiti o
0 ~ 100%
IJADE
PWM FREQUENCY (Iru.) 200 ~ 4000Hz olumulo yipada nipasẹ ETS
SETUP, RISE TIME Note.2 500ms, 80ms/ 230VAC tabi 115VAC
Àkókò ṢE (Iru.) 16ms/230VAC tabi 115VAC
VOLTAGE RANGE AKIYESI.3
90 ~ 305VAC 127 ~ 431VDC (Jọwọ tọka si apakan “SATIC CHARACTERISTIC”)
Iwọn Igbohunsafẹfẹ 47 ~ 63Hz
FACTOR AGBARA (Iru.)
PF>0.97/115VAC, PF>0.96/230VAC, PF>0.94/277VAC @ fifuye kikun (Jọwọ tọka si apakan “AGBARA FACTOR (PF) HARACTERISTIC”)
Àpapọ̀ ìrẹ́pọ̀
THD< 20%(@load60%/115VAC, 230VAC; @load75%/277VAC) (Jọwọ tọka si apakan “Apapọ HARMONIC DISTORTION”)
ÀWỌN Ọ̀RỌ̀
AGBARA (Iru.)
88.5%
90%
AC lọwọlọwọ (Iru.)
1.3A / 115VAC 0.65A / 230VAC 0.55A / 277VAC
INRUSH lọwọlọwọ (Iru.) Ibẹrẹ tutu 60A (iwọn = 520s ti a wọn ni 50% Ipeak) ni 230VAC; Fun NEMA 410
MAX. RARA. ti PSUs lori 16A CIRCUIT BREAKER
Awọn ẹya 4 (olufọkasi ti iru B) / awọn ẹya 6 (fifọ iru C) ni 230VAC
Isọjade lọwọlọwọ
<0.25mA / 277VAC
IJẸ AGBARA Iduroṣinṣin <0.5W
APOJU
108 ~ 130% ti a ṣe iwọn agbara iṣelọpọ ipo Hiccup, gba pada laifọwọyi lẹhin ti o ti yọ ipo aṣiṣe kuro
KIRI KURO
Pa o/p voltage, tun-agbara lati bọsipọ
IDAABOBO LORI VOLTAGE
15 ~ 17V Pa o/p voltage, tun-agbara lati bọsipọ
28 ~ 34V
LORI IGBAGBÜ Pa o/p voltage, tun-agbara lati bọsipọ
IDANWO SISE.
Tcase = -40 ~ +90 (Jọwọ tọka si "OUTPUT LOAD vs TEMPERATURE" apakan)
MAX. ÌṢẸ́ ỌJỌ́.
Tcase=+90
Ọriniinitutu Ṣiṣẹ
20 ~ 95% RH ti kii ṣe idapọmọra
ÌGBÀ ÌṢÍJỌ́ ÀYÀYÀ., Ọ̀RỌ̀ -40 ~ +80, 10 ~ 95% RH
TEMP. ALAGBARA
± 0.03% / (0 ~ 45, ayafi 0 ~ 40 fun 12V)
VIBRATION
10 ~ 500Hz, 5G 12min./1cycle, akoko fun 72min. kọọkan pẹlú X, Y, Z ãke
AABO awọn ajohunše
Akiyesi.5
ENEC BS EN/EN61347-1, BS EN/EN61347-2-13, BS EN/EN62384 ominira, GB19510.14, GB19510.1, EAC TP TC 004 fọwọsi
KNX awọn ajohunše
Ilana ti a fọwọsi
FISTAND VOLTAGE
AABO & amupu;
EMC
IPINLE RESISTANCE
EMC EMISSION Akiyesi.6
EMC AJE
MTBF
I/PO/P:3.75KVAC
I/PO/P:100M Ohms/500VDC/25/ 70% RH
Ibamu si BS EN/EN55015, BS EN/EN61000-3-2 Kilasi C (@load60%); BS EN/EN61000-3-3, GB/T 17743, GB17625.1; EAC TP TC 020
Ibamu si BS EN/EN61000-4-2,3,4,5,6,8,11; BS EN/EN61547, ipele ile ise ina (ajesara Laini-Laini 2KV),EAC TP TC 020 1915.2K wakati min. Telcordia SR-332 (Bellcore); 205.8K wakati min. MIL-HDBK-217F (25)
MIIRAN DIMENSION
191*63*37.5mm (L*W*H)
AKIYESI
Iṣakojọpọ
0.80Kg; 15pcs / 13.0Kg / 0.87CUFT
1. Gbogbo awọn paramita NOT ti a mẹnuba pataki ni a wọn ni titẹ sii 230VAC, ti a ṣe iwọn lọwọlọwọ ati 25 ti iwọn otutu ibaramu. 2. De-Rating le wa ni ti nilo labẹ kekere input voltages. Jowo tọka si awọn apakan “IWA IBI” fun awọn alaye. 3. Gigun akoko iṣeto ni a ṣe iwọn ni ibẹrẹ tutu akọkọ. Titan/PA awakọ le ja si ilosoke akoko iṣeto. 4. A ṣe akiyesi awakọ naa gẹgẹbi paati ti yoo ṣiṣẹ ni apapo pẹlu ohun elo ikẹhin. Niwọn igba ti iṣẹ EMC yoo kan
nipasẹ fifi sori ẹrọ pipe, awọn aṣelọpọ ohun elo ti o kẹhin gbọdọ tun ṣe deede Ilana EMC lori fifi sori ẹrọ pipe lẹẹkansi. (bi o wa lori https://www.meanwell.com//Upload/PDF/EMI_statement_en.pdf) 5. Yi jara pàdé awọn aṣoju aye ireti> 50,000 wakati ti isẹ nigba ti Tcase, paapa tc ojuami (tabi TMP, fun DLC). ), jẹ nipa 75 tabi kere si. 6. Jọwọ tọka si alaye atilẹyin ọja lori MEAN WELL's webAaye ni http://www.meanwell.com 7. Iwọn otutu ibaramu ti 3.5/1000m pẹlu awọn awoṣe ti ko ni afẹfẹ ati ti 5/1000m pẹlu awọn awoṣe afẹfẹ fun iṣẹ giga ti o ga ju 2000m(6500ft). 8. Fun eyikeyi akọsilẹ ohun elo ati iṣẹ iṣeduro fifi sori omi IP omi, jọwọ tọka itọnisọna olumulo wa ṣaaju lilo. https://www.meanwell.com/Upload/PDF/LED_EN.pdf
Ifijiṣẹ Layabiliti Ọja Fun alaye alaye, jọwọ tọka si https://www.meanwell.com/serviceDisclaimer.aspx
File Orukọ: PWM-120-KN-SPEC 2024-03-12
120W PWM O wu KNX LED Driver
DIMMING isẹ
AC/L(Brown) AC/N(bulu)
PWM-120-KN
PWM-120-KN jara
KNX+(Pupa) KNX-(dudu) +V(Pupa) -V(dudu)
Ilana dimming fun iṣelọpọ ara PWM Dimming jẹ aṣeyọri nipasẹ yiyatọ iwọn iṣẹ-ṣiṣe ti lọwọlọwọ iṣelọpọ.
O wu DC lọwọlọwọ ON
Io=0A
PA TON
T
TON Ojuse ọmọ (%) =
×100%
T
Ijadejade igbohunsafẹfẹ PWM to 4KHz
KNXInterface Waye ifihan agbara KNX laarin KNX + ati KNX-. Eto ohun elo (database) le ṣe igbasilẹ nipasẹ Awọn katalogi Ayelujara lati ETS tabi nipasẹ http://www.meanwell.com/productCatalog.aspx
File Orukọ: PWM-120-KN-SPEC 2024-03-12
Fifuye (%)
120W PWM O wu KNX LED Driver
O wu fifuye vs otutu
PWM-120-KN jara
100
80 230VAC Igbewọle nikan
60 50 40
20
12V nikan
-40 -25
0
15
30
40 45 50
60
IRU otutu ibaramu, Ta ()
70 (petele)
Fifuye (%)
100
80 230VAC Igbewọle nikan
60
40
20
-40 -25
20
45
65
75
85
90 (petele)
Tcase ()
ÀWỌN ÀWỌN ÌSÌN
100 90 80 70 60 50 40
90 100 125 135 145 155 165 175 180 200 230 305
IPIN iwọleTAGE (V) 60Hz De-Rating wa ni ti nilo labẹ kekere input voltage.
PATAKI HARMONIC lapapọ (THD)
24V Awoṣe, Tcase ni 80
25
20
15
10
5
0
50%
60%
70%
80%
90%
100%
GBIGBE
115VAC 230VAC 277VAC
IṢẸ́(%)
PF
AGBARA FACTOR (PF) abuda
Apejọ ni 80
1 0.9 0.8 0.7 0.6 0.5 0.4 0.3 0.2 0.1
0 10% 20% 30% 40% 50% 60% 70% 80% 90% 100%
GBIGBE
115V 230V 277V
AGBARA vs fifuye
PWM-120-KN jara ni iṣẹ ṣiṣe ti o ga julọ ti o to 90% le de ọdọ awọn ohun elo aaye. 24V Awoṣe, Tcase ni 80
100 90 80 70 60 50 40 30 20 10
0 10% 20% 30% 40% 50% 60% 70% 80% 90% 100%
GBIGBE
115V 230V 277V
IKÚN THD (%)
File Orukọ: PWM-120-KN-SPEC 2024-03-12
120W PWM O wu KNX LED Driver
PWM-120-KN jara
AKIYESI AYE
ASIKO AYE(Kh)
120
100
80
60
40
20
0
20
30
40
50
60
70
80
90
Tcase()
File Orukọ: PWM-120-KN-SPEC 2024-03-12
120W PWM O wu KNX LED Driver
PWM-120-KN jara
Àkọsílẹ aworan atọka
EMI Ajọ
I / P
&
RIFIFIERS
PFC CIRCUIT
AGBARA Yipada
OTP
OLP
PWM & PFC Iṣakoso
Awọn olupilẹṣẹ &
FILE
PFC fosc: 50 ~ 120KHz PWM fosc: 60 ~ 130KHz
OLP
DIMMING CIRCUIT
IRCUIT Iwari
+V -V KNX+ KNX-
OVP
Akiyesi: PWM fosc nibi ko ni ibatan si didasilẹ PWM jade
Mechanical Specification
300 ± 20
AC/L(Brown) AC/N(bulu)
50± 3 SJTW 18AWG×2C
5
191 KNX siseto bọtini & LED
5
63 31.5
2-4.5
T irú tc
95.5
5
tc: o pọju. Case otutu
5
irú No.. PWM-120-KN
Ẹka: mm
350 ± 10
UL2464 20AWG×2C
SJOW 17AWG × 2C 50 ± 3 300 ± 10
KNX+(Pupa) KNX-(dudu) +V(Pupa) -V(dudu)
KNX asopo wa ninu apoti
37.5
3
Ẹ̀rọ view ti nipa ìbéèrè
AC/L(Brown) AC/N(bulu)
KNX+(Pupa) KNX-(dudu) +V(Pupa) -V(dudu)
File Orukọ: PWM-120-KN-SPEC 2024-03-12
120W PWM O wu KNX LED Driver
So Iṣagbesori Itọsọna
Fifi sori Afowoyi Asopọ fun KNX-Iru
PWM-120-KN jara
AC/L(brown) AC/N(buluu)
Vo+(RED)
+
–
Vo-(BLACK)
KNX+(pupa)
LED rinhoho tabi ibakan voltage LED boolubu
KNX- (BLACK) PWM KN jara le jẹ adirẹsi ETS / siseto LAYI asopọ si awọn mains AC.
KNX akero
Awọn iṣọra Ṣaaju ki o to bẹrẹ eyikeyi fifi sori ẹrọ tabi iṣẹ itọju, jọwọ ge asopọ ipese agbara lati inu ohun elo naa. Rii daju pe ko le tun sopọ lairotẹlẹ! Jeki fentilesonu to dara ni ayika ẹyọ naa ki o ma ṣe gbe nkan kankan sori rẹ. Bakannaa imukuro 10-15 cm gbọdọ wa ni ipamọ nigbati ẹrọ ti o wa nitosi jẹ orisun ooru. Awọn iṣalaye iṣagbesori miiran yatọ si iṣalaye boṣewa tabi ṣiṣẹ labẹ iwọn otutu ibaramu giga le mu iwọn otutu paati inu ati pe yoo nilo idinku ninu iṣẹjade lọwọlọwọ. Iwọn lọwọlọwọ ti okun alakọbẹrẹ/atẹle ti a fọwọsi yẹ ki o tobi ju tabi dọgba si ti ẹyọ naa. Jọwọ tọka si sipesifikesonu rẹ. Iye ti o ga julọ ti Tc. ti wa ni idanimọ lori aami ọja. Jọwọ rii daju pe iwọn otutu ti aaye Tc kii yoo kọja opin. MAA ṢE so "KNX- si Vo-". Ipese agbara ni a gba bi paati ti yoo ṣiṣẹ ni apapo pẹlu ohun elo ikẹhin. Niwọn igba ti iṣẹ ṣiṣe EMC yoo ni ipa nipasẹ fifi sori ẹrọ pipe, awọn aṣelọpọ ohun elo ikẹhin gbọdọ tun ṣe deede Itọsọna EMC lori fifi sori pipe lẹẹkansi.
File Orukọ: PWM-120-KN-SPEC 2024-03-12
Awọn iwe aṣẹ / Awọn orisun
 |
ITUMO DARA PWM-120-12 Constant Voltage PWM O wu KNX LED Driver [pdf] Afọwọkọ eni PWM-120-12, PWM-120-24, PWM-120-12tage PWM O wu KNX LED Driver, PWM-120-12, Constant Voltage PWM Iwakọ KNX LED Iwakọ, Iwakọ PWM KNX LED Awakọ, Awakọ LED |