Awọn akoonu
tọju
MARSON MT89M 2D Scan Engine ati Barcode Scan Module
AKOSO
- MT89M Ọkan-nkan Iwapọ 2D Scan Engine n pese iṣẹ ṣiṣe ayẹwo ni ipanu ni idiyele ifigagbaga ati ifosiwewe fọọmu iwapọ. Pẹlu apẹrẹ gbogbo-ni-ọkan rẹ, ẹrọ ọlọjẹ MT89M 2D le ni irọrun ṣepọ pẹlu awọn ohun elo kan pato gẹgẹbi iṣakoso iwọle, kiosk lotiri ati ẹrọ itanna olumulo.
- Ẹrọ ọlọjẹ MT89M 2D ni 1 LED itanna, 1 aimer LED ati sensọ aworan didara kan pẹlu microprocessor kan ti o ni famuwia ti o lagbara lati ṣakoso gbogbo awọn abala ti awọn iṣẹ ati mu ibaraẹnisọrọ ṣiṣẹ pẹlu eto agbalejo lori ipilẹ boṣewa ti awọn atọkun ibaraẹnisọrọ.
- Awọn atọkun meji, UART & USB, wa. UART ni wiwo ibasọrọ pẹlu awọn ogun eto lori TTL-ipele R $ 232 ibaraẹnisọrọ; Ni wiwo USB emulates a USB HID Keyboard tabi foju COM ibudo ẹrọ ati ki o ibasọrọ pẹlu awọn ogun eto lori USB.
Àkọsílẹ aworan atọka
Electric Interface
Pin Iyansilẹ
| Pin # | Itumọ | I/O | Apejuwe | Sikematiki Example |
| 1 | GND | ———— | Agbara ati ilẹ ifihan agbara. |  |
| 2 | TRIG | Iṣawọle | Ga: Duro Ṣiṣayẹwo Kekere: Bẹrẹ Ṣiṣayẹwo |  |
| 3 | NC | ———— | Ni ipamọ | Fi silẹ ti ko ni asopọ. |
MT89M Scan Engine, Integration Itọsọna, V1.0
| 4 | DLED | Abajade | Nigbati ọlọjẹ ba ṣaṣeyọri (Kara to dara), o ṣe agbejade pulse ipele giga, eyiti agbara fifuye rẹ ni opin ati pe ko to lati wakọ LED taara. A ni atilẹyin Circuit LED wakọ wa ni ti beere. |  |
|||||
| 5 | BEEP | Abajade | Nigbati ọlọjẹ ba ṣaṣeyọri (Kara to dara), o ṣejade pulse ipele giga kan.
PWM iṣakoso ifihan agbara le ṣee lo lati wakọ ohun ita palolo buzzer fun aseyori kan kooduopo kooduopo (O dara Ka). |
 |
|||||
| 6 | NC | ———— | Ni ipamọ | Fi silẹ ti ko ni asopọ. | |||||
| 7 | DP | Iduro ọja | USB Iyatọ Signal | ||||||
 |
|||||||||
| Gbigbe | USB_Port | ||||||||
| (USB D+) | VIN_3V
USB_D- USB_D+ GND |
1
2 3 4 |
|||||||
|
|
|||||||||
| 8 | DN | Iduro ọja | Gbigbe Ifihan Iyatọ USB
(USB D-) |
|||||
|
USB_Port |
||||||||
| VIN_3V
USB_D- USB_D+ GND |
 |
|||||||
|
GND |
||||||||
| 9 | UART_TX | Abajade | UART TTL data wu. |  |
||||
| 10 | UART_RX | Iṣawọle | UART TTL data igbewọle. |  |
||||
| 11 | GND | ———— | Agbara ati ilẹ ifihan agbara. |  |
||||
| 12 | VCC | ———— | Ipese voltage igbewọle. Gbọdọ nigbagbogbo sopọ si 3.3V
ibi ti ina elekitiriki ti nwa. |
|
||||
| 13 | VCC | ———— | Ipese voltage igbewọle. Gbọdọ nigbagbogbo sopọ si 3.3V
ibi ti ina elekitiriki ti nwa. |
|
||||
Electric Abuda
| Aami | Awọn iwontun-wonsi | Min | O pọju | Ẹyọ |
| VIH | Igbewọle ipele giga | VDD x 0.7 | - | V |
| VIL | Titẹ sii ipele kekere | - | VDD x 0.3 | V |
| VOH | Jade ipele ti o ga | VDD – 0.3 | - | V |
| VOL | Jade kekere ipele | - | 0.4 | V |
Akiyesi:
- Ibi ti ina elekitiriki ti nwa: VDD = 3.15 ± 0.15V
- Ifihan si awọn ipo igbelewọn ti o pọju fun awọn akoko gigun le ni ipa lori igbẹkẹle ẹrọ.
AWỌN NIPA
Imọ ni pato
| Optic & Išẹ | |
| Orisun Imọlẹ | LED funfun |
| Ifọkansi | LED pupa han |
| Sensọ | 640 x 480 awọn piksẹli |
|
Ipinnu |
4 mil/ 0.01mm (1D)
10 mil/ 0.25mm (2D) |
|
Aaye ti View |
Petele 37°
Inaro 28° |
|
Igun Iwoye |
Pitch Igun ± 60°
Igun Skew ± 60° Eerun Igun 360° |
| Print Itansan ratio | 15% |
| Iwọn ti Field | 141mm (13Mil Code39) |
|
Aṣoju Ijinle Of Field (Ayika: 800 lux) |
5 Mil Code39: 50 ~ 90mm |
| 13 Mil UPC / EAN: 40 ~ 210mm | |
| 15 Mil Code128: 45 ~ 250mm | |
| 15 Mil QR Code: 40 ~ 180mm | |
| 6.67 Mil PDF417: TBD | |
| 10 Mil Data Matrix: TBD | |
| Awọn abuda ti ara | |
| Iwọn | W21.7 x L9 x H7.2 mm |
| Iwọn | 1.4g |
| Àwọ̀ | Dudu |
| Ohun elo | Ṣiṣu |
| Asopọmọra | 13pin ZIF (ipo = 0.3mm) |
| USB | 13pin si 12pin okun Flex (pitch=0.5mm) |
| Itanna | |
| Isẹ Voltage | 3.3VDC ± 5% |
| Ṣiṣẹ Lọwọlọwọ | 170mA |
| Imurasilẹ Lọwọlọwọ | TBD |
| Lọwọlọwọ Laiṣiṣẹ (Ipo Orun) | 800 uA |
| Asopọmọra | |
|
Ni wiwo |
UART (TTL-ipele RS232) |
| USB (Àtẹ bọ́tìnnì HID) | |
| USB (Foju COM) | |
| Ayika olumulo | |
| Awọn iwọn otutu ti nṣiṣẹ | -20°C ~ 60°C |
| Ibi ipamọ otutu | -40°C ~ 70°C |
| Ọriniinitutu | 5% ~ 95% RH (ti kii ṣe itọlẹ) |
| Ju Yiye | 1.5M |
| Imọlẹ Ibaramu | 100,000 Lux (Imọlẹ oorun) |
|
Awọn aami aisan 1D |
UPC-A / UPC-E0 / UPC-E1 EAN-8 / EAN-13
Code128 Code39 Code93 Codebar Ibaṣepọ 2 ti 5 Ile-iṣẹ 2 ti 5 Matrix 2 ti 5 Aṣa 2 ti 5 China Post 25 Code11 MSI Plessey Plessey GS1 Databar GS1 Databar Limited GS1 Databar ti fẹ |
|
Awọn aami aisan 2D |
Koodu QR
Micro QR koodu PDF417 MicroPDF417 Data Matrix Aztec MaxiCode Han Xin Koodu16K |
| Ilana | |
|
OPIN |
Iṣẹ-ṣiṣe lẹhin olubasọrọ 4KV, idasilẹ afẹfẹ 8KV
(O nilo ile ti o jẹ apẹrẹ fun aabo ESD ati ṣina lati awọn aaye ina.) |
| EMC | TBA |
| Aabo Alaye | TBA |
| Ayika | RoHS 2.0 |
Ni wiwo
UART Ọlọpọọmídíà
- Ni isalẹ ni awọn ilana ibaraẹnisọrọ aiyipada:
- Oṣuwọn Baud: 9600
- Data Bits: 8
- Iṣọkan: Ko si
- Duro Bit:1
- Fifọwọkan: Ko si
- Akoko Iṣakoso Sisan: Ko si
- ACK/NAK: PAA
- BCC: PAA
Koodu Iṣeto ni wiwo:
USB HID Interface
Koodu Iṣeto ni wiwo:
(VID: 0x1FC9, PID: 0x5AA7)
USB VCP Interface
Koodu Iṣeto ni wiwo:
(VID: 0x1FCA, PID: 0x5AA8)
Ọna Isẹ
- Ni agbara-soke, MT89M firanṣẹ awọn ifihan agbara-soke lori Buzzer ati awọn pinni LED bi itọkasi pe MT89M wọ Ipo imurasilẹ ati pe o ti ṣetan fun iṣẹ.
- Ni kete ti MT89M nfa nipasẹ boya hardware tabi ọna software, MT89M
yoo emit a tan ina ti ina eyi ti o ti deedee pẹlu awọn sensọ ká aaye ti view. - Sensọ aworan agbegbe ya aworan ti kooduopo ati ṣe agbejade igbi afọwọṣe, eyiti o jẹ sampmu ati atupale nipasẹ famuwia decoder nṣiṣẹ lori MT89M.
- Lori koodu iwọle aṣeyọri aṣeyọri, MT89M yoo pa itanna naa
Awọn LED, fifiranṣẹ awọn ifihan agbara Ka Rere lori Buzzer ati awọn pinni LED ati gbigbe data ti a ti yipada si agbalejo naa.
Mechanical Dimension
(Ẹyọ = mm)
Asopọmọra Specification
MT89M ti wa ni itumọ ti pẹlu kan 13-pin ipolowo 0.3mm FPC asopo. Awoṣe ti a ṣeduro No. ti 13-pin asopo ni FH35C-13S-0.3SHW(50)
Nigbati 13-pin si okun FPC 12-pin (ti a firanṣẹ pẹlu MT89M nipasẹ aiyipada) ti lo, Awoṣe ti a ṣeduro No.
FH34SRJ-12S-0.5SH(50), pẹlu pin iṣẹ iyansilẹ ni isalẹ:
| Pin # | Itumọ | I/O | Apejuwe |
| 1 | NC | ———— | Lilefoofo |
| 2 | VCC | ———— | 3.3V ipese agbara. |
| 3 | GND | ———— | Agbara ati ilẹ ifihan agbara. |
| 4 | UART_TX | Abajade | UART TTL data wu. |
| 5 | UART_RX | Iṣawọle | UART TTL data igbewọle. |
| 6 | DM | Iduro ọja | USB D- ifihan agbara |
| 7 | DP | Iduro ọja | USB D + ifihan agbara |
| 8 | NC | ———— | Lilefoofo |
| 9 | BEEP | Iṣawọle | Buzzer igbewọle |
| 10 | KU | Iṣawọle | Ti o dara kika LED input |
| 11 | NC | ———— | Lilefoofo |
| 12 | TRIG | Abajade | Ijade ifihan agbara |
Fifi sori ẹrọ
- Ẹrọ ọlọjẹ jẹ apẹrẹ pataki fun isọpọ sinu ile alabara fun awọn ohun elo OEM. Bibẹẹkọ, iṣẹ ṣiṣe ẹrọ ọlọjẹ naa yoo ni ipa ti ko dara tabi bajẹ patapata nigbati a ba gbe sinu apade ti ko yẹ.
- Ikilọ: Atilẹyin ọja ti o lopin jẹ ofo ti awọn iṣeduro atẹle wọnyi ko ba faramọ nigba gbigbe ẹrọ ọlọjẹ naa.
Electrostatic Sisọ Išọra
Gbogbo awọn ẹrọ ọlọjẹ ti wa ni gbigbe ni apoti aabo ESD nitori iseda ifura ti awọn paati itanna ti o han.
- Nigbagbogbo lo awọn okun ọwọ ilẹ ati agbegbe iṣẹ ti o wa lori ilẹ nigbati o ba ṣii ati mimu ẹrọ ọlọjẹ naa mu.
- Gbe ẹrọ ọlọjẹ naa sinu ile ti o jẹ apẹrẹ fun aabo ESD ati awọn aaye ina mọnamọna.
Awọn iṣeduro fifi sori ẹrọ
Nigbati o ba ni aabo ẹrọ ọlọjẹ nipa lilo awọn skru ẹrọ:
- Fi aaye to to lati gba iwọn ti o pọju ti ẹrọ ọlọjẹ naa.
- Maṣe kọja 1kg-cm (0.86 lb-in) ti iyipo nigba titọju ẹrọ ọlọjẹ si agbalejo naa.
- Lo awọn iṣe ESD ailewu nigba mimu ati gbigbe ẹrọ ọlọjẹ naa.
- Ma ṣe paade ẹrọ ọlọjẹ pẹlu ohun elo idabobo gbona. Ikuna ti itujade ooru le buru si iṣẹ ẹrọ ọlọjẹ naa.
Fifi sori Iṣalaye
- Meji M1.6 dabaru ihò (max ijinle 2mm) wa ni isalẹ ti MT89M.
- Nigbati awọn ihò dabaru ba dojukọ sisale, irisi MT89M yẹ ki o jẹ aami si aworan loke.
Awọn ohun elo Window
Atẹle ni awọn apejuwe ti awọn ohun elo window olokiki mẹta:
- Poly-methyl Methacrylic (PMMA)
- Allyl Diglycol Carbonate (ADC)
- Kemikali tempered leefofo gilasi
Akiriliki Simẹnti sẹẹli (ASTM: PMMA)
- Akiriliki simẹnti sẹẹli, tabi Poly-methyl Methacrylic jẹ iṣelọpọ nipasẹ simẹnti akiriliki laarin iwe konge meji ti gilasi. Ohun elo yii ni didara opitika ti o dara pupọ, ṣugbọn o jẹ rirọ ati ni ifaragba si ikọlu nipasẹ awọn kemikali, aapọn ẹrọ ati ina UV. A gbaniyanju gidigidi lati ni akiriliki ti a bo pẹlu Polysiloxane lati pese abrasion resistance ati aabo lati awọn ifosiwewe ayika. Akiriliki le ti wa ni lesa-ge sinu odd ni nitobi ati ultrasonically welded.
Simẹnti sẹẹli ADC, Allyl Diglycol Carbonate (ASTM: ADC)
- Tun mọ bi CR-39TM, ADC, ṣiṣu eto igbona ti a lo fun lilo awọn gilaasi ṣiṣu, ni kemikali ti o dara julọ ati resistance ayika. O tun ni líle dada iwọntunwọnsi ati nitori naa ko nilo ibora lile. Awọn ohun elo yi ko le wa ni ultrasonically welded.
Kemikali Tempered leefofo Gilasi
- Gilasi jẹ ohun elo lile eyiti o pese ibere ti o dara julọ ati resistance abrasion. Bibẹẹkọ, gilasi ti a ko tii jẹ brittle. Agbara irọrun ti o pọ si pẹlu ipalọlọ opiti iwonba nilo iwọn otutu kemikali. Gilasi ko le wa ni ultrasonically welded ati ki o jẹ soro lati ge sinu odd ni nitobi.
| Ohun ini | Apejuwe |
| Spectral Gbigbe | 85% kere ju lati 635 si 690 nanometers |
| Sisanra | <1 mm |
|
Aso |
Awọn ẹgbẹ mejeeji lati jẹ atako-iṣajuwe ti a bo lati pese 1% ifojusọna ti o pọju lati 635 si 690 nanometers ni igun titẹ window ipin. Ohun elo ti o lodi si ifasilẹ le dinku ina ti o han pada si ọran agbalejo. Awọn ideri yoo ni ibamu pẹlu ifaramọ lile
ibeere MIL-M-13508. |
Ifilelẹ Window
- Aaye laarin ferese ati iwaju MT89M ko yẹ ki o kọja L=0.5mm
- Awọn sisanra ti window ko yẹ ki o kọja 1mm
Window Iwon
- Iwọn window yẹ ki o rii daju pe aaye ti view ko ni dina, ati pe agbegbe itanna ko yẹ ki o dina pẹlu. Fun iwọn ti window, jọwọ tọka si aworan atọka loke ti agbegbe opiti kọọkan.
Itọju Window
- Ni abala ti window, iṣẹ ti MT89M yoo dinku nitori eyikeyi iru ibere.
- Nitorinaa, idinku awọn ibajẹ ti window, awọn nkan diẹ ni lati ṣe akiyesi.
- Yẹra fun fọwọkan window bi o ti ṣee ṣe.
- Nigbati o ba n nu dada window, jọwọ lo asọ mimọ ti kii ṣe abrasive, lẹhinna rọra nu ferese agbalejo pẹlu asọ ti o ti fọ tẹlẹ pẹlu ẹrọ mimọ gilasi.
Awọn ilana
Ẹrọ ọlọjẹ MT89M ṣe ibamu si awọn ilana wọnyi:
- Ibamu Itanna – TBA
- Itanna kikọlu – TBA
- Aabo Photobiological – TBA
- Awọn ilana Ayika - RoHS 2.0
KIT IDAGBASOKE
- MB130 Ririnkiri Kit (P/N: 11D0-A020000) pẹlu MB130 Multi I/O Board (P/N: 9014-3100000) ati okun USB micro kan. MB130 Multi I / O Board Sin bi ohun ni wiwo ọkọ fun MT89M ati accelerates awọn igbeyewo ati Integration pẹlu awọn ogun eto.
- Jọwọ kan si rẹ tita asoju fun ibere alaye.
- MB130 Multi I/O Board (P/N: 9014-3100000)
Iṣakojọpọ
- Atẹ (iwọn: 24.7 x 13.7 x 2.7cm): Kọọkan atẹ ni 8pcs ti MT89M.
- Apoti (iwọn: 25 x 14 x 3.3cm): Apoti kọọkan ni 1pc ti atẹ, tabi 8pcs ti MT89M
- Paali (iwọn: 30 x 27 x 28cm): Paali kọọkan ni 16pcs ti awọn apoti, tabi 128pcs ti MT89M.
ITAN ti ikede
| Rev. | Ọjọ | Apejuwe | Ti jade | Ti ṣayẹwo |
| 0.1 | 2023.01.09 | Itusilẹ akọkọ | Shaw | Ming |
- Marson Technology Co., Ltd. 9F., 108-3, Minquan Rd., Xindian Dist., Ilu Taipei Tuntun, Taiwan
- TELE: 886-2-2218-1633
- Faksi: 886-2-2218-6638
- Imeeli: info@marson.com.tw
- Web: www.marson.com.tw
Awọn iwe aṣẹ / Awọn orisun
 |
MARSON MT89M 2D Scan Engine ati Barcode Scan Module [pdf] Itọsọna olumulo MT89M, 2D Scan Engine ati Barcode Module, MT89M 2D Scan Engine ati Barcode Scan Module, 2D Scan Engine, Barcode Scan Module |
 |
MARSON MT89M 2D wíwo Engine [pdf] Itọsọna olumulo MT89M 2D Ẹrọ Ayẹwo, MT89M, Ẹrọ Ayẹwo 2D, Ẹrọ Ayẹwo, Ẹnjini |
