MARSON MT1 2D wíwo Engine
AKOSO
MT1 Ọkan-nkan Iwapọ 2D Scan Engine n pese iṣẹ ṣiṣe ọlọjẹ ni ipanu ni idiyele ifigagbaga ati ifosiwewe fọọmu iwapọ. Pẹlu apẹrẹ gbogbo-ni-ọkan rẹ, ẹrọ ọlọjẹ MT1 2D le ni irọrun ṣepọ pẹlu awọn ohun elo kan pato gẹgẹbi iṣakoso iwọle, kiosk lotiri ati ẹrọ itanna olumulo.
Ẹrọ ọlọjẹ MT1 2D ni 1 LED itanna, 1 aimer LED ati a
sensọ aworan ti o ni agbara giga pẹlu microprocessor ti o ni famuwia ti o lagbara lati ṣakoso gbogbo awọn abala ti awọn iṣẹ ati mu ibaraẹnisọrọ ṣiṣẹ pẹlu eto agbalejo lori ipilẹ boṣewa ti awọn atọkun ibaraẹnisọrọ.
Awọn atọkun meji, UART & USB, wa. UART ni wiwo ibasọrọ pẹlu awọn ogun eto lori TTL-ipele RS232 ibaraẹnisọrọ; Ni wiwo USB emulates a USB HID Keyboard tabi foju COM ibudo ẹrọ ati ki o ibasọrọ pẹlu awọn ogun eto lori USB.
Àkọsílẹ aworan atọka
Electric Interface
Pin Iyansilẹ
(Pada View ti MT1)
Awọn aaye olubasọrọ ti asopo wa ni inu
| Pin # | Itumọ | I/O | Apejuwe | Sisọmu Example |
| 1 | GND | ———— | Agbara ati ilẹ ifihan agbara. |  |
| 2 | nTRIG | Iṣawọle | Ga: Duro Ṣiṣayẹwo Kekere: Bẹrẹ Ṣiṣayẹwo |
Ni kete ti PIN nTRIG ba fa silẹ fun diẹ ẹ sii ju 5ms, iṣẹ ṣiṣe ọlọjẹ bẹrẹ titi koodu koodu kan yoo ti yipada ni aṣeyọri tabi PIN nTRIG yoo fa ga. Lati tẹsiwaju si iṣẹ ṣiṣe ayẹwo atẹle, fa giga akọkọ ki o fa kekere lẹẹkansi. O kere ju ti aarin 50ms ni a ṣe iṣeduro laarin awọn ifihan agbara okunfa meji. |
| 3 | nRST | Iṣawọle | Jeki ipele kekere fun o kere ju 100us lati tun ẹrọ ọlọjẹ naa pada. | Ti PIN ko ba si ni lilo, fi silẹ ni aisopọmọ. |
| 4 | LED | Abajade | Nigbati ọlọjẹ ba ṣaṣeyọri (Kara to dara), o ṣe agbejade pulse ipele giga, eyiti agbara fifuye rẹ ni opin ati pe ko to lati wakọ LED taara. A ni atilẹyin Circuit LED wakọ wa ni ti beere. |  |
| 5 | Buzzer | Abajade | Giga ti nṣiṣe lọwọ: o tọkasi ipo Power-Up tabi koodu koodu aṣeyọri aṣeyọri.
Ifihan agbara iṣakoso PWM le ṣee lo lati wakọ buzzer ita fun yiyan koodu koodu aṣeyọri (Ka O dara). |
 |
| 6 | EXT LED Konturolu | Abajade | Ifihan agbara iṣakoso itanna LED ita. |  Ti PIN ko ba si ni lilo, fi silẹ ni aisopọmọ. |
| 7 | USB_D + | Iduro ọja | Gbigbe Ifihan Iyatọ USB
(USB D+) |
USB_Port VIN_3V 1 5 USB_D- 2 USB_D+ 3 GND 46 GND |
| 8 | USB_D- | Iduro ọja | Gbigbe Ifihan Iyatọ USB
(USB D-) |
USB_D- 2 USB_D+ 3 GND 4 6 GND |
| 9 | UART_TX | Abajade | UART TTL data wu. |
|
| 10 | UART_RX | Iṣawọle | UART TTL data igbewọle. |
|
| 11 | GND | ———— | Agbara ati ilẹ ifihan agbara. | |
| 12 | VCC | ———— | Ipese voltage igbewọle. Gbọdọ nigbagbogbo sopọ si ipese agbara 3.3V. |  |
| 13 | VCC | ———— | Ipese voltage igbewọle. Gbọdọ nigbagbogbo sopọ si ipese agbara 3.3V. | |
USB_Port VIN_3V
Sipex® Olutaja P/N: SP232ACT
Sipex® Olutaja P/N: SP232ACTElectric Abuda
- Awọn ọna Voltage Ta=25°C
| Aami | Awọn iwontun-wonsi | Min | Aṣoju | O pọju | Ẹyọ |
| VDD | Ibi ti ina elekitiriki ti nwa | - | 3.3 | - |
V |
| VIL | Titẹ sii ipele kekere | - | - | 0.8 | |
| VIH | Igbewọle ipele giga | 2 | - | - | |
| VOL | Jade kekere ipele | - | - | 0.4 | |
| VOH | Jade ipele ti o ga | 2.5 | - | - |
Ṣiṣẹ Lọwọlọwọ
Ta=25°C, VDD= 3.3V
| Awọn iwontun-wonsi | O pọju | Ẹyọ |
| Imurasilẹ Lọwọlọwọ | 15 |
mA |
| Ṣiṣẹ Lọwọlọwọ | 200 |
AWỌN NIPA
Imọ ni pato
| Opiki & Iṣẹ ṣiṣe | |
| Imọlẹ Orisun | LED funfun |
| Ifọkansi | LED pupa han |
| Sensọ | 640 x 480 awọn piksẹli |
| Ipinnu | 3mil/ 0.075mm (koodu 39) |
| Aaye of View | Petele 43°
Inaro 33° |
| Ṣayẹwo Igun | Pitch Igun ± 55°
Igun Skew ± 55° Eerun Igun 360° |
| Titẹ sita Iyatọ Ipin | 10% |
| Ìbú of Aaye | 176mm (13Mil Code39) |
| Aṣoju
Ijinle Of Aaye |
5 Mil Code39: 42 ~ 204mm |
| 13 Mil UPC / EAN: 45 ~ 350mm | |
| 15 Mil QR Code: 28 ~ 246mm | |
| 6.67 Mil PDF417: 46 ~ 152mm | |
| 10 Mil Data Matrix: 37 ~ 150mm | |
| Ti ara Awọn abuda | |
| Iwọn | W21.5 x L9 x H6.7 mm |
| Iwọn | 1.25g |
| Àwọ̀ | Dudu |
| Ohun elo | Ṣiṣu |
| Asopọmọra | 13pin ZIF (ipo = 0.3mm) |
| USB | 13pin si 12pin okun Flex (pitch=0.5mm) |
| Itanna | |
| Isẹ Voltage | 3.3VDC ± 5% |
| Ṣiṣẹ Lọwọlọwọ | <200 mA |
| Duro die Lọwọlọwọ | <15 mA |
| Laiṣiṣẹ Lọwọlọwọ (Orun Njagun) | Iru. 2.7mA |
| Asopọmọra | |
| Ni wiwo | UART (TTL-ipele RS232) |
| USB (Àtẹ bọ́tìnnì HID) | |
| USB (Foju COM) | |
| Olumulo Ayika | |
| Ṣiṣẹ Iwọn otutu | -20°C ~ 60°C |
| Ibi ipamọ Iwọn otutu | -40°C ~ 70°C |
| Ọriniinitutu | 5% ~ 95% RH (ti kii ṣe itọlẹ) |
| Ju silẹ Iduroṣinṣin | 1.5M |
| Ibaramu Imọlẹ | 100,000 Lux (Imọlẹ oorun) |
| 1D Awọn aami aisan | UPC-A / UPC-E EAN-8 / EAN-13 ISBN / ISSN
Codebar Code 11 koodu 39 koodu 32 koodu 93 koodu 128 Ibaṣepọ 2 ti 5 Matrix 2 ti 5 Ile-iṣẹ 2 ti 5 Standard 2 ti 5 Plessey MSI Plessey Febraban Apapo GS1 Databar |
| 2D Awọn aami aisan | Koodu QR
Micro QR koodu PDF417 MicroPDF417 Data Matrix Aztec MaxiCode HanXin DotCode |
| Ilana | |
| ESD | Iṣẹ-ṣiṣe lẹhin olubasọrọ 4KV, idasilẹ afẹfẹ 8KV |
| (O nilo ile ti o jẹ apẹrẹ fun ESD
Idaabobo ati ṣona lati awọn aaye ina.) |
|
| EMC | TBA |
| Aabo Alaye | TBA |
| Ayika | RoHS 2.0 |
Ni wiwo
UART Ọlọpọọmídíà
- Ni isalẹ wa awọn ilana ibaraẹnisọrọ aiyipada: Oṣuwọn Baud: 9600
- Data Bits: 8
- Parity: Ko si
- Duro Duro: 1
- Gbigbọn: Kò
- Akoko Iṣakoso Sisan: Ko si
- ACK/NAK: PA
- BCC: PA
Koodu Iṣeto ni wiwo:
UART
USB HIID Interface
Koodu Iṣeto ni wiwo:
USB Ìbòmọlẹ
USB VCP Interface
Koodu Iṣeto ni wiwo:
VCP USB
Ọna Isẹ
- Ni agbara-soke, MT1 firanṣẹ awọn ifihan agbara-soke lori Buzzer ati awọn pinni LED bi itọkasi pe MT1 wọ Ipo imurasilẹ ati pe o ti ṣetan fun iṣẹ.
- Ni kete ti MT1 nfa nipasẹ boya ohun elo tabi ọna sọfitiwia, MT1 yoo tan ina ina kan ti o ni ibamu pẹlu aaye sensọ ti view.
- Sensọ aworan agbegbe ya aworan ti kooduopo ati ṣe agbejade igbi afọwọṣe, eyiti o jẹ sampmu ati ṣe atupale nipasẹ famuwia decoder ti nṣiṣẹ lori MT1.
- Lori koodu iwọle aṣeyọri kan, MT1 wa ni pipa awọn LED itanna, fifiranṣẹ awọn ifihan agbara Ka Rere lori Buzzer ati awọn pinni LED ati gbigbe data ti a ti pinnu si agbalejo naa.
Mechanical Dimension
(Ẹyọ = mm, Ifarada = ± 0.2mm)
Asopọmọra Specification
MT1 ti wa ni itumọ ti pẹlu kan 13-pin ipolowo 0.3mm FPC asopo. Awoṣe ti a ṣeduro No. ti 13-pin asopo ni FH35C-13S-0.3SHW(50)
Nigbati 13-pin si okun FPC 12-pin (ti o firanṣẹ pẹlu MT1 nipasẹ aiyipada) ti lo, Awoṣe ti a ṣeduro No. pẹlu pin iṣẹ ni isalẹ:
| Pin # | Itumọ | I/O | Apejuwe |
| 1 | NC | ———— | Lilefoofo |
| 2 | VCC | ———— | 3.3V ipese agbara. |
| 3 | GND | ———— | Agbara ati ilẹ ifihan agbara. |
| 4 | UART_TX | Abajade | UART TTL data wu. |
| 5 | UART_RX | Iṣawọle | UART TTL data igbewọle. |
| 6 | USB_D- | Iduro ọja | USB D- ifihan agbara |
| 7 | USB_D + | Iduro ọja | USB D + ifihan agbara |
| 8 | NC | ———— | Lilefoofo |
| 9 | Buzzer | Iṣawọle | Buzzer igbewọle |
| 10 | LED | Iṣawọle | Ti o dara kika LED input |
| 11 | nRST | Abajade | Tunjade ifihan agbara |
| 12 | nTRIG | Abajade | Ijade ifihan agbara |
Ìfisípò
Ẹrọ ọlọjẹ jẹ apẹrẹ pataki fun isọpọ sinu ile alabara fun awọn ohun elo OEM. Bibẹẹkọ, iṣẹ ṣiṣe ẹrọ ọlọjẹ naa yoo ni ipa ti ko dara tabi bajẹ patapata nigbati a ba gbe sinu apade ti ko yẹ.
Ikilọ: Atilẹyin ọja ti o lopin jẹ ofo ti awọn iṣeduro atẹle wọnyi ko ba faramọ nigba gbigbe ẹrọ ọlọjẹ naa.
Electrosstatic Sisọ Išọra
Gbogbo awọn ẹrọ ọlọjẹ ti wa ni gbigbe ni apoti aabo ESD nitori iseda ifura ti awọn paati itanna ti o han.
- Nigbagbogbo lo awọn okun ọwọ ilẹ ati agbegbe iṣẹ ti o wa lori ilẹ nigbati o ba ṣii ati mimu ẹrọ ọlọjẹ naa mu.
- Gbe ẹrọ ọlọjẹ naa sinu ile ti o jẹ apẹrẹ fun aabo ESD ati awọn aaye ina mọnamọna.
Fifi sori Niyanju
Nigbati o ba ni aabo ẹrọ ọlọjẹ nipa lilo awọn skru ẹrọ:
- Fi aaye to to lati gba iwọn ti o pọju ti ẹrọ ọlọjẹ naa.
- Maṣe kọja 1kg-cm (0.86 lb-in) ti iyipo nigba titọju ẹrọ ọlọjẹ si agbalejo naa.
- Lo awọn iṣe ESD ailewu nigba mimu ati gbigbe ẹrọ ọlọjẹ naa.
- Ma ṣe paade ẹrọ ọlọjẹ pẹlu ohun elo idabobo gbona. Ikuna ti itujade ooru le buru si iṣẹ ẹrọ ọlọjẹ naa.
Fifi sori Iṣalaye
Meji M1.4 dabaru ihò (max ijinle 2mm) wa ni isalẹ ti MT1. Nigbati awọn ihò dabaru ba dojukọ sisale, irisi MT1 yẹ ki o jẹ aami si aworan loke.
Awọn ohun elo Window
Atẹle ni awọn apejuwe ti awọn ohun elo window olokiki mẹta:
- Poly-methyl Methacrylic (PMMA)
- Allyl Diglycol Carbonate (ADC)
- Kemikali tempered leefofo gilasi
Akiriliki Simẹnti sẹẹli (ASTM: PMMA)
Akiriliki simẹnti sẹẹli, tabi Poly-methyl Methacrylic jẹ iṣelọpọ nipasẹ simẹnti akiriliki laarin iwe konge meji ti gilasi. Ohun elo yii ni didara opitika ti o dara pupọ, ṣugbọn o jẹ rirọ ati ni ifaragba si ikọlu nipasẹ awọn kemikali, aapọn ẹrọ ati ina UV. A gbaniyanju gidigidi lati ni akiriliki ti a bo pẹlu Polysiloxane lati pese abrasion resistance ati aabo lati awọn ifosiwewe ayika. Akiriliki le ti wa ni lesa-ge sinu odd ni nitobi ati ultrasonically welded.
Simẹnti sẹẹli ADC, Allyl Diglycol Carbonate (ASTM: ADC)
Tun mọ bi CR-39TM, ADC, ṣiṣu eto igbona ti a lo fun lilo awọn gilaasi ṣiṣu, ni kemikali ti o dara julọ ati resistance ayika. O tun ni líle dada iwọntunwọnsi ati nitori naa ko nilo ibora lile. Awọn ohun elo yi ko le wa ni ultrasonically welded.
Kemikali Tempered leefofo Gilasi
Gilasi jẹ ohun elo lile eyiti o pese ibere ti o dara julọ ati resistance abrasion. Bibẹẹkọ, gilasi ti a ko tii jẹ brittle. Agbara irọrun ti o pọ si pẹlu ipalọlọ opiti iwonba nilo iwọn otutu kemikali. Gilasi ko le wa ni ultrasonically welded ati ki o jẹ soro lati ge sinu odd ni nitobi.
| Ohun ini | Apejuwe |
| Spectral Gbigbe | 85% kere ju lati 635 si 690 nanometers |
| Sisanra | <1 mm |
| Aso | Awọn ẹgbẹ mejeeji lati jẹ atako-iṣajuwe ti a bo lati pese 1% ifojusọna ti o pọju lati 635 si 690 nanometers ni igun titẹ window ipin. Ohun elo ti o lodi si ifasilẹ le dinku ina ti o han pada si ọran agbalejo. Awọn ideri yoo ni ibamu pẹlu awọn ibeere ifaramọ lile ti MIL-M-13508. |
Ifilelẹ Window
MT1 Apa View 
Aaye laarin window ati iwaju MT1 ko yẹ ki o kọja L=0.5mm Awọn sisanra ti window ko yẹ ki o kọja 1mm
Window Iwon
Iwọn window yẹ ki o rii daju pe aaye ti view ko ni dina, ati pe agbegbe itanna ko yẹ ki o dina pẹlu. Fun iwọn ti window, jọwọ tọka si aworan atọka loke ti agbegbe opiti kọọkan.
Itọju Window
Ni abala ti window, iṣẹ ti MT1 yoo dinku nitori eyikeyi iru ibere. Nitorinaa, idinku awọn ibajẹ ti window, awọn nkan diẹ ni lati ṣe akiyesi.
- Yẹra fun fọwọkan window bi o ti ṣee ṣe.
- Nigbati o ba n nu dada window, jọwọ lo asọ mimọ ti kii ṣe abrasive, lẹhinna rọra nu ferese agbalejo pẹlu asọ ti o ti fọ tẹlẹ pẹlu ẹrọ mimọ gilasi.
Awọn ilana
Ẹrọ ọlọjẹ MT1 ni ibamu si awọn ilana wọnyi:
- Ibamu itanna - TBA
- Itanna kikọlu - TBA
- Aabo Photobiological – TBA
- Awọn ilana Ayika - RoHS 2.0
KIT IDAGBASOKE
MB130 Ririnkiri Kit (P/N: 11D0-A020000) pẹlu MB130 Multi I/O Board (P/N: 9014-3100000) ati ki o kan bulọọgi okun USB. MB130 Multi I / O Board Sin bi ohun ni wiwo ọkọ fun MT1 ati ki o accelerates awọn igbeyewo ati Integration pẹlu awọn ogun eto. Jọwọ kan si rẹ tita asoju fun ibere alaye.
MB130 Multi I/O Board (P/N: 9014-3100000) 
Iṣakojọpọ
- Atẹ (iwọn: 24.7 x 13.7 x 2.7cm): Atẹ kọọkan ni 8pcs ti MT1 ni.
- Apoti (iwọn: 25 x 14 x 3.3cm): Apoti kọọkan ni 1pc ti atẹ, tabi 8pcs ti MT1.
- Paali (iwọn: 30 x 27 x 28cm): Paali kọọkan ni 16pcs ti awọn apoti, tabi 128pcs ti MT1.
ITAN ti ikede
| Rev. | Ọjọ | Apejuwe | Ti jade | Ti ṣayẹwo |
| 0.1 | 2022.09.12 | Itusilẹ akọkọ | Shaw | Ming |
| 0.2 | 2022.09.22 | Imudojuiwọn Pin iyansilẹ | Shaw | Ming |
Marson Technology Co., Ltd.
9F., 108-3, Minquan Rd., Xindian Dist., Ilu Taipei Tuntun, Taiwan
TEL: 886-2-2218-1633
FAX: 886-2-2218-6638
Imeeli: info@marson.com.tw
Web: www.marson.com.tw
Awọn iwe aṣẹ / Awọn orisun
 |
MARSON MT1 2D wíwo Engine [pdf] Itọsọna olumulo MT1, 2D Scan Engine, MT1 2D Scan Engine |
