Cudy PE10 Quick Installation Guide

This guide provides step-by-step instructions for installing your Cudy PE10 network adapter.

Installation Steps

Disconnect Power: Unplug the power cable and remove the case panel.
Insert Adapter: Insert the adapter into an available PCI-E slot and secure it with the provided screw.
Assemble and Power On: Assemble the case panel and power on your computer.
Connect Ethernet: Plug in the Ethernet cable and connect it to your router or switch.
Verify Network Connection: Check if the computer is connected to the network.

Troubleshooting

If the adapter is not detected:

Check the insertion.
Try another slot.
Contact support@cudy.com.

Driver Installation

If the computer is not connected to the network after installation, download and install the driver by scanning the QR code or visiting:

http://www.cudy.com/pe10

Support and Resources

For technical support, the user guide, and more information, please visit:

https://www.cudy.com/pages/contact

Website: www.cudy.com

Email: support@cudy.com

Safety Information

Keep the device away from water, fire, humidity, or hot environments. Do not attempt to disassemble, repair, or modify the device. Do not use the device where wireless devices are not allowed. This USB adapter can only be powered by computers that comply with Limited Power Source (LPS). Please read and follow the above safety information when operating the device. Cudy cannot guarantee that no accidents or damage will occur due to improper use of the device. Please use this product with care and operate at your own risk.

Compliance Information

FCC Compliance: This equipment complies with Part 15 of the FCC Rules. Operation is subject to two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

EU Declaration of Conformity: Cudy declares that this device complies with essential requirements and other relevant provisions of Directive 2014/53/EU, Directive 2011/65/EU, and Directive (EU) 2015/863. The original EU declaration of conformity can be found at http://www.cudy.com/ce.

Canadian Compliance: This device complies with Industry Canada license-exempt RSS standard(s). Operation is subject to two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation.

WEEE: This product must not be disposed of as normal household waste. Return it to the place of purchase or a public collection point for recyclable waste.

	Cudy PE10 Network Adapter Quick Installation Guide Learn how to install your Cudy PE10 network adapter with this quick installation guide. Covers hardware setup, software installation, FAQs, and support resources.
	Cudy PE10 Quick Installation Guide for PCI-E Network Adapter Step-by-step instructions for installing the Cudy PE10 PCI-E network adapter, including setup, driver installation, and troubleshooting. Provides compliance and safety information.
	Cudy PE25 Network Adapter User Manual User manual for the Cudy PE25 Network Adapter, covering hardware installation, software setup, FAQ, warranty information, and EU Declaration of Conformity.
	Cudy WE9300/WE9300S Quick Installation Guide: Setup and Driver Installation Learn how to install and set up your Cudy WE9300 or WE9300S Bluetooth and Wi-Fi adapter with this quick installation guide. Includes hardware setup, driver installation, and package contents.
	Cudy WE4000 Wireless and Bluetooth Adapter User Manual User manual for the Cudy WE4000 adapter, providing instructions for hardware installation, driver setup, package contents, warranty information, and EU Declaration of Conformity.
	Cudy WE9300/WE9300S Wi-Fi Adapter Quick Installation Guide Learn how to quickly install and set up your Cudy WE9300 or WE9300S Wi-Fi adapter with this comprehensive installation guide.
	Cudy 4G/5G Router Quick Installation Guide Comprehensive guide for setting up Cudy 4G/5G routers, covering antenna installation, SIM card insertion, power connection, LED status, network configuration via Wi-Fi or Ethernet, and SIM PIN entry. Includes EU Declaration of Conformity and support information.
	Cudy BU530 Bluetooth 5.3 Nano USB Adapter - Declaration of Conformity Official Declaration of Conformity for the Cudy BU530 Bluetooth 5.3 Nano USB Adapter, confirming compliance with relevant EU directives and standards.