Beijer ELECTRONICS GT-3468 Afọwọṣe Input Module
Awọn pato
- Awọn pato Ayika: The module operates within a temperature range of X to Y degrees Celsius and a humidity range of Z% to W%.
- Sipesifikesonu gbogbogbo: Provides details on the general functioning and compatibility of the module.
- Awọn pato igbewọle: Details on the analog input capabilities, voltage range, resolution, etc.
Nipa Itọsọna yii
Iwe afọwọkọ yii ni alaye ninu sọfitiwia ati awọn ẹya hardware ti Beijer Electronics GT-3468 Module Input Analog. O pese awọn alaye ti o jinlẹ, itọnisọna lori fifi sori ẹrọ, iṣeto, ati lilo ọja naa.
Awọn aami Lo ninu Itọsọna yii
Atẹjade yii pẹlu Ikilọ, Iṣọra, Akọsilẹ ati awọn aami pataki nibiti o yẹ, lati tọka si ti o ni ibatan aabo, tabi alaye pataki miiran. Awọn aami ti o baamu yẹ ki o tumọ bi atẹle:
IKILO
Indicates a potentially hazardous situation which, if not avoided, could result in death or serious injury, and major damage to the product.
Ṣọra
Indicates a potentially hazardous situation which, if not avoided, could result in minor or moderate injury, and moderate damage to the product.
PATAKI
Highlights key information.
AKIYESI
Points out relevant facts and conditions.
Imọran
Provides useful, non-essential information to assist you.
Aabo
Ṣaaju lilo ọja yii, jọwọ ka iwe afọwọkọ yii ati awọn iwe afọwọkọ miiran ti o yẹ ni pẹkipẹki. San ifojusi ni kikun si awọn itọnisọna ailewu!
Ni iṣẹlẹ ti Beijer Electronics yoo ṣe iduro tabi ṣe oniduro fun awọn bibajẹ ti o waye lati lilo ọja yii.
Awọn aworan, examples ati awọn aworan atọka ninu iwe afọwọkọ yii wa fun awọn idi ijuwe. Nitori ọpọlọpọ awọn oniyipada ati awọn ibeere ti o ni nkan ṣe pẹlu fifi sori eyikeyi pato, Beijer Electronics ko le gba ojuse tabi layabiliti fun lilo gangan ti o da lori iṣaaju.amples ati awọn aworan atọka.
Awọn iwe-ẹri ọja
Ọja naa ni awọn iwe-ẹri ọja atẹle.
Gbogbogbo Awọn ibeere Abo
IKILO
- Maṣe ṣajọ awọn ọja ati awọn okun onirin pẹlu agbara ti a ti sopọ si eto naa. Ṣiṣe bẹ fa “filaṣi arc” kan, eyiti o le ja si awọn iṣẹlẹ eewu airotẹlẹ (ina, ina, awọn ohun ti n fo, titẹ bugbamu, bugbamu ohun, ooru).
- Maṣe fi ọwọ kan awọn bulọọki ebute tabi awọn modulu IO nigbati eto n ṣiṣẹ. Ṣiṣe bẹ le fa ina mọnamọna, Circuit kukuru tabi aiṣedeede ẹrọ naa.
- Maṣe jẹ ki awọn nkan ti fadaka ita kan kan ọja naa nigbati eto ba nṣiṣẹ. Ṣiṣe bẹ le fa ina mọnamọna, Circuit kukuru tabi aiṣedeede ẹrọ naa.
- Ma ṣe gbe ọja naa si nitosi ohun elo ti o ni ina. Ṣiṣe bẹ le fa ina.
- Gbogbo iṣẹ onirin yẹ ki o ṣe nipasẹ ẹlẹrọ itanna.
- Nigbati o ba n mu awọn modulu, rii daju pe gbogbo eniyan, ibi iṣẹ ati iṣakojọpọ ti wa ni ipilẹ daradara. Yago fun fọwọkan awọn paati adaṣe, awọn modulu ni awọn paati itanna ti o le parun nipasẹ itusilẹ itanna.
Ṣọra
- Maṣe lo ọja naa ni awọn agbegbe pẹlu iwọn otutu ti o ju 60 ℃. Yago fun gbigbe ọja naa sinu ina taara.
- Maṣe lo ọja naa ni awọn agbegbe ti o ju 90% ọriniinitutu lọ.
- Nigbagbogbo lo ọja ni awọn agbegbe pẹlu iwọn idoti 1 tabi 2.
- Lo boṣewa kebulu fun onirin.
Nipa G-jara System
Eto ti pariview
- Module Adapter Nẹtiwọọki - module ohun ti nmu badọgba nẹtiwọọki n ṣe ọna asopọ laarin ọkọ akero aaye ati awọn ẹrọ aaye pẹlu awọn modulu imugboroja. Isopọ si oriṣiriṣi awọn ọna ọkọ akero aaye le jẹ idasilẹ nipasẹ ọkọọkan module ohun ti nmu badọgba nẹtiwọọki ti o baamu, fun apẹẹrẹ, fun MODBUS TCP, Ethernet IP, EtherCAT, PROFINET, CC-Link IE Field, PROFIBUS, CANopen, DeviceNet, CC-Link, MODBUS/Serial etc.
- Module Imugboroosi - Awọn iru module Imugboroosi: Digital IO, Analog IO, ati Awọn modulu Pataki.
- Fifiranṣẹ – Eto naa nlo iru fifiranṣẹ meji: Fifiranṣẹ iṣẹ ati fifiranṣẹ IO.
IO Ilana Data maapu
Module imugboroja ni awọn iru data mẹta: data IO, paramita atunto, ati iforukọsilẹ iranti. Paṣipaarọ data laarin ohun ti nmu badọgba nẹtiwọọki ati awọn modulu imugboroja ni a ṣe nipasẹ data aworan ilana IO nipasẹ ilana inu.
Sisan data laarin ohun ti nmu badọgba nẹtiwọki (63 iho) ati imugboroosi modulu
Awọn titẹ sii ati data aworan ti o wu da lori ipo iho ati iru data ti iho imugboroosi. Awọn ibere ti input ki o si wu ilana image data da lori awọn imugboroosi Iho ipo. Awọn iṣiro fun eto yii wa ninu awọn iwe ilana fun ohun ti nmu badọgba nẹtiwọọki ati awọn modulu IO eto.
Data paramita to wulo da lori awọn modulu ti o wa ni lilo. Fun example, afọwọṣe modulu ni eto
of either 0-20 mA or 4-20 mA, and temperature modules have settings such as PT100, PT200, and PT500. The documentation for each module provides a description of the parameter data.
Awọn pato
Awọn pato Ayika
| Awọn iwọn otutu ti nṣiṣẹ | -20°C – 60°C |
| UL iwọn otutu | -20°C – 60°C |
| Ibi ipamọ otutu | -40°C – 85°C |
| Ojulumo ọriniinitutu | 5%-90% ti kii ṣe condensing |
| Iṣagbesori | DIN iṣinipopada |
| Iṣẹ-mọnamọna | IEC 60068-2-27 (15G) |
| Idaabobo gbigbọn | IEC 60068-2-6 (4 g) |
| Awọn itujade ile-iṣẹ | EN 61000-6-4: 2019 |
| Ajẹsara ile-iṣẹ | EN 61000-6-2: 2019 |
| Ipo fifi sori ẹrọ | Inaro ati petele |
| Awọn iwe-ẹri ọja | CE, FCC, UL, cUL |
Gbogbogbo Specification
| Pipase agbara | O pọju. 30 mA @ 5 VDC |
| Ìyàraẹniṣọ́tọ̀ | I/O to kannaa: Ipinya
Agbara aaye: Ti kii ṣe ipinya |
| UL aaye agbara | Ipese voltage: 24 VDC ipin, class2 |
| Agbara aaye | Ipese voltage: 24 VDC ipin Voltage ibiti: 18-30 VDC
Ipilẹ agbara: Max. 30 mA @ 24 VDC |
| Asopọmọra | I/O okun max. 2.0mm2 (AWG 14) |
| Torque | 0.8 Nm (7 lb-ni) |
| Iwọn | 58 g |
| Iwọn module | 12 mm x 99 mm x 70 mm |
Awọn iwọn
Awọn pato igbewọle
| Awọn igbewọle fun module | Awọn ikanni 8 pari ni ẹyọkan, ti kii ṣe iyasọtọ laarin ikanni |
| Awọn itọkasi | 8 alawọ ewe input ipo |
| Ipinnu ni awọn sakani | 16 bit (pẹlu ami)
15 bits: 0.31 mV/bit (0-10 V), 0.15 mV/bit (0-5 V), 0.12 mV/bit (1-5 VDC) |
| Input lọwọlọwọ ibiti | 0-10 VDC, 0-5 VDC, 1-5 VDC |
| Data kika | Odidi 16 bit (iyin 2') |
| Aṣiṣe module | ± 0.1% ni kikun asekale @ 25 ℃ ibaramu
± 0.3% ni kikun iwọn @ -40 °C, 70 ℃ |
| Input impedance | 500 kΩ |
| Aisan aisan | Aisan aaye agbara ni pipa: LED si pawalara
Agbara aaye titan: LED pipa <0.5% (iye igbewọle ti o pọju) Agbara aaye lori: LED lori> 0.5 % (iye igbewọle ti o pọju) |
| Akoko iyipada | 0.5 ms / All channels |
| Isọdiwọn aaye | Ko beere |
| Iru wọpọ | 2 wọpọ, agbara aaye 0 V jẹ wọpọ (AGND) |
Aworan onirin
| Pin ko si. | Apejuwe ifihan agbara |
| 0 | Ikanni igbewọle 0 |
| 1 | Ikanni igbewọle 1 |
| 2 | Ikanni igbewọle 2 |
| 3 | Ikanni igbewọle 3 |
| 4 | Ikanni igbewọle 4 |
| 5 | Ikanni igbewọle 5 |
| 6 | Ikanni igbewọle 6 |
| 7 | Ikanni igbewọle 7 |
| 8 | Ikanni igbewọle wọpọ (AGND) |
| 9 | Ikanni igbewọle wọpọ (AGND) |
LED Atọka
| LED No. | LED iṣẹ / apejuwe | LED awọ |
| 0 | INPUT ikanni 0 | Alawọ ewe |
| 1 | INPUT ikanni 1 | Alawọ ewe |
| 2 | INPUT ikanni 2 | Alawọ ewe |
| 3 | INPUT ikanni 3 | Alawọ ewe |
| 4 | INPUT ikanni 4 | Alawọ ewe |
| 5 | INPUT ikanni 5 | Alawọ ewe |
| 6 | INPUT ikanni 6 | Alawọ ewe |
| 7 | INPUT ikanni 7 | Alawọ ewe |
LED ikanni Ipo
| Ipo | LED | Itọkasi |
| Iṣiṣẹ deede | [LED ni pipa <0.5% (iye igbewọle ti o pọju)] -
Ikanni PA [LED on> 0.5% (o pọju input iye)] - ikanni Green |
Iṣiṣẹ deede |
| Aṣiṣe agbara aaye | Gbogbo awọn ikanni tun Green ati PA | Agbara aaye ko ni asopọ |
Iye data / Voltage
Voltage range: 0-10 VDC
| Voltage | 0.0 V | 2.5 V | 5.0 V | 10.0 V |
| Data (Hex) | H0000 | H1FFF | H3FFF | H7FFF |
Voltage ibiti: 0-5 VDC
| Voltage | 0.0 V | 1.25 V | 2.5 V | 5.0 V |
| Data (Hex) | H0000 | H1FFF | H3FFF | H7FFF |
Voltage range: 1-5 VDC
| Voltage | 1.0 V | 2.0 V | 3.0 V | 5.0 V |
| Data (Hex) | H0000 | H1FFF | H3FFF | H7FFF |
Data iyaworan Sinu Aworan Tabili
Input module data
| Iṣagbewọle Analog Ch 0 |
| Iṣagbewọle Analog Ch 1 |
| Iṣagbewọle Analog Ch 2 |
| Iṣagbewọle Analog Ch 3 |
| Iṣagbewọle Analog Ch 4 |
| Iṣagbewọle Analog Ch 5 |
| Iṣagbewọle Analog Ch 6 |
| Iṣagbewọle Analog Ch 7 |
Iye aworan titẹ sii
| Bit rara. | Bit 7 | Bit 6 | Bit 5 | Bit 4 | Bit 3 | Bit 2 | Bit 1 | Bit 0 |
| Baiti 0 | Afọwọṣe igbewọle Ch 0 kekere baiti | |||||||
| Baiti 1 | Afọwọṣe igbewọle Ch 0 ga baiti | |||||||
| Baiti 2 | Afọwọṣe igbewọle Ch 1 kekere baiti | |||||||
| Baiti 3 | Afọwọṣe igbewọle Ch 1 ga baiti | |||||||
| Baiti 4 | Afọwọṣe igbewọle Ch 2 kekere baiti | |||||||
| Baiti 5 | Afọwọṣe igbewọle Ch 2 ga baiti | |||||||
| Baiti 6 | Afọwọṣe igbewọle Ch 3 kekere baiti | |||||||
| Baiti 7 | Afọwọṣe igbewọle Ch 3 ga baiti | |||||||
| Baiti 8 | Afọwọṣe igbewọle Ch 4 kekere baiti | |||||||
| Baiti 9 | Afọwọṣe igbewọle Ch 4 ga baiti | |||||||
| Baiti 10 | Afọwọṣe igbewọle Ch 5 kekere baiti | |||||||
| Baiti 11 | Afọwọṣe igbewọle Ch 5 ga baiti | |||||||
| Baiti 12 | Afọwọṣe igbewọle Ch 6 kekere baiti | |||||||
| Baiti 13 | Afọwọṣe igbewọle Ch 6 ga baiti | |||||||
| Baiti 14 | Afọwọṣe igbewọle Ch 7 kekere baiti | |||||||
| Baiti 15 | Afọwọṣe igbewọle Ch 7 ga baiti | |||||||
Paramita Data
Wulo paramita ipari: 10 Bytes
| Bit rara. | Bit 7 | Bit 6 | Bit 5 | Bit 4 | Bit 3 | Bit 2 | Bit 1 | Bit 0 |
| Baiti 0 | Voltage range for Ch 0 (H00: 0-10 VDC, H01: 0-5 VDC, H02: 1-5 VDC) | |||||||
| Baiti 1 | Voltage range for Ch 1 (H00: 0-10 VDC, H01: 0-5 VDC, H02: 1-5 VDC) | |||||||
| Baiti 2 | Voltage range for Ch 2 (H00: 0-10 VDC, H01: 0-5 VDC, H02: 1-5 VDC) | |||||||
| Baiti 3 | Voltage range for Ch 3 (H00: 0-10 VDC, H01: 0-5 VDC, H02: 1-5 VDC) | |||||||
| Baiti 4 | Voltage range for Ch 4 (H00: 0-10 VDC, H01: 0-5 VDC, H02: 1-5 VDC) | |||||||
| Baiti 5 | Voltage range for Ch 5 (H00: 0-10 VDC, H01: 0-5 VDC, H02: 1-5 VDC) | |||||||
| Baiti 6 | Voltage range for Ch 6 (H00: 0-10 VDC, H01: 0-5 VDC, H02: 1-5 VDC) | |||||||
| Baiti 7 | Voltage range for Ch 7 (H00: 0-10 VDC, H01: 0-5 VDC, H02: 1-5 VDC) | |||||||
| Baiti 8 | Filter Time (H00: Default (20), H01: Fastest, H3E: Slowest ) | |||||||
| Baiti 9 | Modul e resolu tion (0: 16-
bit (defau lt), 1: 14-bit) |
Ni ipamọ | ||||||
Hardware Oṣo
Ṣọra
- Always read this section before installing the module!
- Hot surface! The surface of the housing can become hot during operation. If the module is used in high ambient temperatures, always let it cool down before touching it.
- Working on energized devices can damage the equipment! Always turn off the power supply before working on the module.
Awọn ibeere aaye
Awọn iyaworan atẹle yii ṣe afihan awọn ibeere aaye nigba fifi awọn modulu G-jara sori ẹrọ. Aaye naa ṣẹda aaye fun fentilesonu, ati ṣe idiwọ kikọlu itanna eleto lati ni ipa lori iṣẹ naa. Ipo fifi sori ẹrọ wulo inaro ati petele. Awọn iyaworan jẹ apejuwe ati pe o le ko ni iwọn.
Ṣọra
Lai tẹle awọn ibeere aaye le ja si ibajẹ ọja naa.
Oke Module to DIN Rail
Awọn wọnyi ipin apejuwe bi o lati gbe awọn module si DIN iṣinipopada.
Ṣọra
Awọn module gbọdọ wa ni titunse si awọn DIN iṣinipopada pẹlu awọn levers titiipa.
Oke GL-9XXX tabi GT-XXXX Module
Awọn itọnisọna wọnyi lo si awọn iru module wọnyi:
- GL-9XXX
- GT-1XXX
- GT-2XXX
- GT-3XXX
- GT-4XXX
- GT-5XXX
- GT-7XXX
Awọn modulu GN-9XXX ni awọn lefa titiipa mẹta, ọkan ni isalẹ ati meji ni ẹgbẹ. Fun awọn ilana iṣagbesori, tọka si Module Oke GN-9XXX.
Oke GN-9XXX Module
Lati gbe tabi yọ ohun ti nmu badọgba nẹtiwọọki kuro tabi module IO eto pẹlu orukọ ọja GN-9XXX, fun ex.ample GN-9251 tabi GN-9371, wo awọn ilana wọnyi:
Òke yiyọ ebute Block
Lati gbe tabi dismount a yiyọ kuro ebute Àkọsílẹ (RTB), wo awọn ilana ni isalẹ.
So Cables to yiyọ ebute Block
Lati sopọ / ge asopọ awọn kebulu si/lati ibi-ipamọ ebute yiyọ kuro (RTB), wo awọn ilana ni isalẹ.
IKILO
Nigbagbogbo lo awọn niyanju ipese voltage ati igbohunsafẹfẹ lati ṣe idiwọ ibajẹ si ẹrọ ati rii daju iṣẹ ṣiṣe to dara julọ.
Agbara aaye ati awọn pinni data
Ibaraẹnisọrọ laarin ohun ti nmu badọgba nẹtiwọọki G-jara ati module imugboroja, ati eto / aaye ipese agbara ti awọn modulu ọkọ akero ni a ṣe nipasẹ ọkọ akero inu. O jẹ ninu awọn Pinni Agbara aaye 2 ati awọn pinni data 6.
IKILO
Maṣe fi ọwọ kan data ati awọn pinni agbara aaye! Fọwọkan le ja si ile ati ibajẹ nipasẹ ariwo ESD.
| Pin ko si. | Oruko | Apejuwe |
| P1 | Eto VCC | Eto ipese voltage (5VDC) |
| P2 | Eto GND | Ilẹ System |
| P3 | Ijade tokini | Àmi o wu ibudo ti isise module |
| P4 | Tẹlentẹle o wu | Atagba o wu ibudo ti isise module |
| P5 | Tẹlentẹle igbewọle | Olugba input ibudo ti isise module |
| P6 | Ni ipamọ | Ni ipamọ fun àmi fori |
| P7 | Aaye GND | Ilẹ aaye |
| P8 | Aaye VCC | Ipese aaye voltage (24VDC) |
Aṣẹ-lori-ara © 2025 Beijer Electronics AB. Gbogbo awọn ẹtọ wa ni ipamọ.
Alaye ti o wa ninu iwe yii jẹ koko ọrọ si iyipada laisi akiyesi ati pe a pese bi o ṣe wa ni akoko titẹ sita. Beijer Electronics AB ni ẹtọ lati yi alaye eyikeyi pada laisi imudojuiwọn atẹjade yii. Beijer Electronics AB ko gba ojuse fun eyikeyi awọn aṣiṣe ti o le han ninu iwe yii. Gbogbo examples ni iwe yi ti wa ni nikan ti a ti pinnu lati mu oye ti awọn iṣẹ-ṣiṣe ati mimu awọn ẹrọ. Beijer Electronics AB ko le gba eyikeyi gbese ti o ba ti awọn wọnyi Mofiamples ti wa ni lilo ni gidi ohun elo.
In view ti awọn jakejado ibiti o ti ohun elo fun yi software, awọn olumulo gbọdọ gba to imo ara wọn ni ibere lati rii daju wipe o ti wa ni ti tọ lo ni wọn pato ohun elo. Awọn eniyan ti o ni iduro fun ohun elo ati ohun elo gbọdọ funrararẹ rii daju pe ohun elo kọọkan wa ni ibamu pẹlu gbogbo awọn ibeere, awọn iṣedede, ati ofin ni ọwọ si iṣeto ati ailewu. Beijer Electronics AB kii yoo gba gbese fun eyikeyi ibajẹ ti o ṣẹlẹ lakoko fifi sori ẹrọ tabi lilo ohun elo ti a mẹnuba ninu iwe yii. Beijer Electronics AB ni idinamọ gbogbo iyipada, iyipada, tabi iyipada ẹrọ.
Ile Olori Ise patapata
- Beijer Electronics AB
- Apoti 426
- 201 24 Malmö, Sweden
- www.beijerelectronics.com / +46 40 358600
FAQ
Kini MO le ṣe ti itọkasi LED ko ba tan?
Check the wiring connections to ensure they are secure and correct. Also, verify power supply to the module.
Awọn iwe aṣẹ / Awọn orisun
 |
Beijer ELECTRONICS GT-3468 Afọwọṣe Input Module [pdf] Afowoyi olumulo Module Input Analog GT-3468, GT-3468, Module Input Analog, Module Input, Module |