1. Ifihan
This user manual provides detailed instructions for the installation, operation, and maintenance of the SAMOTECH Zigbee Dimmer 2-CH Module. This module is designed to integrate seamlessly with various Zigbee hubs, including Philips Hue, Home Assistant, Homekit, SmartThings, and Hubitat, allowing for smart control of lighting.
2. Alaye Aabo
IKILO: Electrical installation should only be performed by a qualified electrician. Incorrect installation can lead to electric shock, fire, or damage to the device and connected equipment. Always disconnect power at the circuit breaker before performing any electrical work.
- Ensure the power supply is completely off before installation or maintenance.
- Daju voltage and current ratings of the module are compatible with your electrical system and connected loads.
- This device requires a neutral wire for proper operation.
- Ma ṣe fi ẹrọ naa han si ọrinrin tabi iwọn otutu to gaju.
- Adhere to all local electrical codes and regulations.
3. Ọja Ipariview
The SAMOTECH Zigbee Dimmer 2-CH Module is a compact in-wall device designed for smart lighting control. It supports resistive, capacitive, and inductive loads and features a soft start function. It can be installed in deep wall switch electrical boxes or behind ceiling roses.
Awọn ẹya pataki:
- ZigBee 3.0 protocol for reliable wireless communication.
- Compatible with popular Zigbee gateways (Philips Hue, Homekit, Echo Plus, Hubitat, Homeassistant).
- Wide input and output voltage ibiti: 100-240VAC.
- Supports various load types.
- Requires a neutral wire.
- Soft start function for extended bulb life.
- Supports self-forming Zigbee networks and find-and-bind mode.
Àwòrán module:
Nọmba 3.1: SAMOTECH Zigbee Dimmer 2-CH Module. The image shows the compact white module with green screw terminals for input (AC 100-240V L, L, N, N) and output (OUT), a small antenna, a reset button, and labels including "zigbee certified product", "SM308-S", "SAMOTECH", "Ratings: 100-240V~, 50/60Hz MAX:4.8A / 1.4A", and "CE UK CA" markings.
4. Eto ati fifi sori
Pataki: Ensure power is disconnected at the circuit breaker before proceeding with installation.
- Asopọmọra: Connect the module according to the provided wiring diagram (refer to product packaging or manufacturer's website for detailed diagrams). Ensure correct connection of Live (L), Neutral (N), and Output (OUT) wires. The module requires a neutral wire.
- Ibi: For initial setup, place the device as close as possible to your Zigbee hub to ensure a strong signal for pairing.
- Bẹ̀rẹ̀ Ipò Ìsopọ̀pọ̀:
- For SM308/SM309 models: Press the reset button 5 times rapidly.
- For SM314 models: Press the reset button twice. A blue LED flashing indicates the device is ready for pairing.
- For MS104Z models: Turn the device on 5 times. A beep sound indicates the device is ready for pairing.
- Pairing with Zigbee Hub:
- Amazon Echo Plus/Echo Show 2nd Gen: Ask Alexa to "discover new devices."
- Philips Hue: Add a new light through the Hue app: Settings -> Light setup -> Add light (SM308, SM309, SM314 only). Note: Pairing with Philips Hue may require a "Touch Link" procedure, where the module is brought very close to the Hue Bridge during pairing.
- Other Compatible Zigbee Hubs (Home Assistant, Homekit, SmartThings, Hubitat): Follow your specific hub's instructions for adding new Zigbee devices.
- Idanwo: Once paired, test the dimmer functionality through your Zigbee hub's application or voice commands.
5. Awọn ilana Iṣiṣẹ
Once the SAMOTECH Zigbee Dimmer Module is successfully installed and paired with your Zigbee hub, you can control your connected lights using the hub's interface, associated smart switches, or voice commands (if integrated with a voice assistant).
- Titan/Pa Iṣakoso: Use your Zigbee app or voice assistant to turn the connected lights on or off.
- Iṣakoso Dimming: Adjust the brightness level of the connected lights through your Zigbee app's dimmer slider or specific voice commands (e.g., "Set brightness to 50%").
- Ipele ati adaṣiṣẹ: Integrate the dimmer module into scenes, routines, or automations within your Zigbee ecosystem for advanced control based on schedules, sensor triggers, or other smart home events.
- Iṣakoso Yipada Ti ara: If a retractive (momentary) light switch is connected to the module's input (S1/COM), you can use it to toggle the lights on/off and, in some configurations, dim them by holding the switch.
6. Itọju
The SAMOTECH Zigbee Dimmer Module requires minimal maintenance. Follow these guidelines to ensure optimal performance and longevity:
- Ninu: If necessary, gently wipe the module with a dry, soft cloth. Do not use liquid cleaners or solvents.
- Awọn imudojuiwọn famuwia: Periodically check your Zigbee hub's application for available firmware updates for the module. Updates can improve performance, add features, or fix bugs.
- Awọn ipo Ayika: Ensure the module is installed in a dry environment, away from direct sunlight, excessive heat, or moisture.
- Yiyipo Agbara: If the module becomes unresponsive, try power cycling it by turning off the circuit breaker for a few seconds and then turning it back on.
7. Laasigbotitusita
| Isoro | Owun to le Fa | Ojutu |
|---|---|---|
| Module does not pair with hub. | Not in pairing mode; too far from hub; hub compatibility issue. | Ensure module is in pairing mode (press reset button 5 times). Move module closer to hub for initial pairing. Verify hub compatibility. |
| Lights do not respond to commands. | No power to module; incorrect wiring; module not properly paired. | Check circuit breaker. Verify wiring connections. Re-pair the module with the hub. |
| Dimming is erratic or lights flicker. | Incompatible load type; minimum load not met; faulty bulb. | Ensure connected bulbs are dimmable. Check if the total wattage of connected bulbs meets the module's minimum load requirement. Try a different dimmable bulb. |
| Module frequently goes offline. | Weak Zigbee signal; interference; too many devices on network. | Improve Zigbee network mesh by adding more Zigbee devices (routers). Reduce interference from Wi-Fi or other wireless devices. |
8. Awọn pato
| Iwa | Iye |
|---|---|
| Brand | SAMOTECH |
| Nọmba awoṣe | 5060610231220 (SM309-S-2CH) |
| Ipo Isẹ | ON-PA-ON |
| Ti isiyi Rating | 4.8 Amps |
| Olubasọrọ Iru | Ṣii ni deede |
| Asopọmọra Iru | Pulọọgi sinu |
| Ebute | Dabaru |
| Circuit Iru | 2-ọna |
| Actuator Iru | Titari Bọtini |
| International Idaabobo Rating | IP44 |
| Nọmba ti Awọn ipo | 2 |
| Package Mefa | 2.28 x 2.24 x 1.46 inches |
| Iwọn | 1.76 iwon |
9. Atilẹyin ọja ati Support
For warranty information and technical support, please refer to the official SAMOTECH webojula tabi kan si wọn onibara iṣẹ taara. Tọju iwe-ẹri rira rẹ bi ẹri rira fun awọn iṣeduro atilẹyin ọja.
Ibi iwifunni: Jọwọ ṣabẹwo www.samotech.co.uk fun awọn titun support oro ati olubasọrọ awọn alaye.
