Ìwé Àfọwọ́kọ Olùlò Anker AK-A2523011 PowerWave Evo Stand Alailowaya Charger

1. Ifihan

The Anker PowerWave Evo Stand is a high-speed wireless charging stand designed for Qi-compatible devices. It supports both horizontal and vertical charging orientations, offering convenience for various uses. This manual provides instructions for the safe and efficient use of your PowerWave Evo Stand.

Awọn ẹya pataki:

• Universal Fast Charging: Delivers optimal charging speeds for compatible devices.
• Case Compatibility: Charges through phone cases up to 5mm thick.
• Flexible Charging: Supports both horizontal and vertical device placement.
• Intelligent Power Delivery: Automatically detects your device to provide 5W, 7.5W (for iPhone 8/8 Plus/X), or 10W (for Samsung).

Image 1.1: Anker PowerWave Evo Stand, Quick Charge 3.0 wall charger, and Micro USB cable.

2. Package Awọn akoonu

Jọwọ rii daju pe gbogbo awọn ohun kan wa ninu apo rẹ:

• 1x Anker PowerWave Evo Stand
• 1x Quick Charge 3.0 Wall Charger
• 1x 3 ft Micro USB Cable

3. Awọn ilana iṣeto

1. Connect the Micro USB cable to the input port on the PowerWave Evo Stand.
2. Plug the other end of the Micro USB cable into the Quick Charge 3.0 wall charger.
3. Insert the Quick Charge 3.0 wall charger into a power outlet. The indicator light on the stand will briefly illuminate, indicating it is ready for use.

4. Awọn ilana Iṣiṣẹ

Lati gba agbara si ẹrọ rẹ:

1. Ensure the PowerWave Evo Stand is properly connected to a power source as described in the Setup section.
2. Place your Qi-compatible smartphone directly onto the charging surface of the stand. The phone can be placed in either a vertical (portrait) or horizontal (landscape) orientation.
3. The indicator light on the stand will turn blue to confirm that charging has begun. If the light flashes blue, a foreign object may be detected, or the device is not properly aligned.
4. For optimal charging, ensure your phone is centered on the stand's charging coil.

Image 4.1: Device placement for charging in portrait and landscape modes.

Ibamu ti ọran naa

The PowerWave Evo Stand is designed to charge through most phone cases up to 5mm thick. However, certain materials and attachments can interfere with wireless charging.

• Remove any metal attachments, magnets, grips, stands, or credit cards from the back of your phone case before placing it on the charger.
• Thicker cases (over 5mm) may prevent charging.

Image 4.2: Case compatibility guidelines for wireless charging.

5. Alaye Aabo

To ensure safe operation and prevent damage to the device or personal injury, please observe the following:

• Iwari Ohun ajeji (FOD): The charger is equipped with technology to detect misplaced metal objects. If a foreign object is detected, the charging process will halt to ensure safety.
• Idaabobo lọwọlọwọ: This feature prevents damage to both the charger and connected devices from power surges.
• Ifọwọsi Ailewu: The device complies with FCC and CE certifications, ensuring protection from harmful radiation and adherence to safety standards.
• Do not expose the device to extreme temperatures, direct sunlight, or wet conditions.
• Do not disassemble or attempt to repair the device. Contact customer support for assistance.
• Ẹrọ yii ni ibamu pẹlu Apá 15 ti Awọn ofin FCC. Isẹ jẹ koko ọrọ si awọn ipo meji wọnyi: (1) Ẹrọ yii le ma fa kikọlu ipalara, ati (2) Ẹrọ yii gbọdọ gba kikọlu eyikeyi ti o gba, pẹlu kikọlu ti o le fa iṣẹ ti ko fẹ.

6. Laasigbotitusita

• Ẹrọ ko gba agbara:
  • Ensure the PowerWave Evo Stand is properly connected to the Quick Charge 3.0 wall charger and a working power outlet.
  • Verify that your phone is Qi-compatible.
  • Remove any metal objects, magnets, credit cards, or thick cases (over 5mm) from your phone or phone case.
  • Re-position your phone on the charging stand to ensure proper alignment with the charging coil.
  • Gbìyànjú láti lo ọ̀nà agbára mìíràn.
• Charging is slow:
  • Ensure you are using the included Quick Charge 3.0 wall charger and Micro USB cable, as other chargers may not provide sufficient power for fast wireless charging.
  • Confirm your phone supports fast wireless charging.
  • Remove any phone cases that might be impeding charging efficiency.
• Indicator light flashing blue:
  • This indicates a foreign object has been detected or the phone is not correctly placed. Remove the phone, check for any foreign objects on the stand or phone, and re-position the phone.

7. Awọn pato

8. Itọju

To maintain the performance and longevity of your PowerWave Evo Stand:

• Keep the charging surface clean and free of dust or debris. Use a soft, dry cloth for cleaning.
• Yago fun sisọ ẹrọ naa silẹ tabi fifisilẹ si awọn ipa to lagbara.
• Tọju ṣaja ni itura, ibi gbigbẹ nigbati ko si ni lilo.

9. Atilẹyin ọja ati Support

The Anker PowerWave Evo Stand comes with an Atilẹyin ọja laisi wahala osu 18.

For technical support, warranty claims, or other inquiries, please contact Anker customer service. Contact information can typically be found on the official Anker webojula tabi nipasẹ rẹ alagbata.

Visit Anker's Official Webojula fun alaye siwaju sii ati support oro.