Ọja Pariview
The Gardner Bender GUSB-3450 USB Multimeter is designed to confirm USB port voltage and current, and to check the functionality of chargers, cables, and USB ports. This device features a durable, high-impact housing and includes a convenient pocket clip for portability. It is capable of measuring current draw, assessing the performance of solar USB chargers, and testing for proper wiring and polarity. The integrated display alternates between showing voltage ati amperage readings for easy interpretation.
Image: The Gardner Bender GUSB-3450 USB Multimeter, a compact red device with a digital display and a standard USB-A connector.
Key Awọn ẹya ara ẹrọ
- Awọn sọwedowo voltage and current of USB ports.
- Tests charging cables for proper function.
- Measures current draw from connected devices.
- Tests for proper wiring and polarity in USB connections.
- Features a durable, high-impact housing for longevity.
- Easy-to-understand digital display that alternates between volts and amps.
- Includes a pocket clip for convenient carrying.
Ṣeto
- Identify USB Port: Locate a standard USB-A port on your power source (e.g., computer, wall charger, power bank).
- Insert Multimeter: Plug the Gardner Bender GUSB-3450 USB Multimeter directly into the USB-A port of your power source. Ensure a firm connection.
- So ẹrọ pọ: Plug the USB charging cable of the device you wish to test (e.g., smartphone, tablet) into the USB-A output port of the GUSB-3450 Multimeter.
- Agbara Tan: Once connected, the multimeter's display will automatically activate and begin showing readings. No external power or batteries are required for the multimeter itself.
Image: The GUSB-3450 Multimeter connected to a laptop's USB port, with a charging cable extending to a smartphone, illustrating a typical setup.
Aworan: A sunmọ-soke view of the GUSB-3450 Multimeter plugged into a laptop's USB port, showing the compact design and direct connection.
Awọn ilana Iṣiṣẹ
The GUSB-3450 Multimeter provides real-time readings of voltage and current. The display automatically alternates between these two measurements.
Kika Voltage (V)
When the display shows a 'V' symbol next to the numerical value, it indicates the voltage being supplied by the USB port. Standard USB 2.0/3.0 ports typically supply 5V. Deviations from this value can indicate an issue with the power source or cable.
Image: The GUSB-3450 Multimeter's digital display showing a voltage reading of '5.01 V', indicating the measured voltage.
Reading Current (A)
When the display shows an 'A' symbol next to the numerical value, it indicates the current (amperage) being drawn by the connected device. This reading is useful for determining if a device is charging at its expected rate or if a cable/charger is underperforming. For example, a smartphone might draw 1A or 2A depending on its charging capabilities and the charger's output.
Image: The GUSB-3450 Multimeter's digital display showing a current reading of '0.86 A', indicating the measured ampigba.
Testing Polarity and Wiring
The multimeter can help identify issues with wiring and polarity by displaying unexpected voltage or current readings. If a USB port or cable is incorrectly wired, the device may not function, or the multimeter may show no reading or an unstable reading. Always ensure connections are secure and the device is properly inserted.
Itoju
- Ninu: To clean the multimeter, gently wipe the surface with a soft, dry cloth. Do not use abrasive cleaners, solvents, or immerse the device in water.
- Ibi ipamọ: Tọju ẹrọ naa ni itura, aye gbigbẹ kuro lati orun taara ati awọn iwọn otutu to gaju.
- Mimu: The device features a high-impact housing, but avoid dropping it or subjecting it to excessive force to prevent damage to internal components or the display.
Laasigbotitusita
- Ko si Ifihan:
- Ensure the multimeter is fully inserted into a functioning USB port.
- Verify the USB port itself is active and supplying power. Try a different USB port or power source.
- Awọn kika aiduroṣinṣin:
- Check all connections (multimeter to source, cable to multimeter, device to cable) for looseness.
- The connected device might be drawing fluctuating current, which is normal during certain charging phases.
- Test with a different USB cable or device to isolate the issue.
- Awọn kika ti ko tọ:
- Compare readings with another known good USB tester if available.
- Ensure the power source is providing stable power.
Awọn pato
| Sipesifikesonu | Iye |
|---|---|
| Brand | Gardner Bender |
| Nọmba awoṣe | GUSB-3450 |
| Orisi wiwọn | Multimeter (Voltage, Current) |
| Ifihan ara | Oni-nọmba |
| Àwọ̀ | Pupa |
| Ohun elo | ABS |
| Iwọn Nkan | 22.68 g (0.8 iwon) |
| Awọn iwọn Ọja (L x W x H) | 1 x 0.5 x 2.56 inches |
| Orisun agbara | Agbara USB (Ko si awọn batiri ti a beere) |
| Lilo | Current Measurement, USB Port Function and Cable Tester, Voltage Idiwon |
| UPC | 032076937621 |
Atilẹyin ọja ati Support
Alaye atilẹyin ọja
The Gardner Bender GUSB-3450 USB Multimeter comes with a Atilẹyin ọja Odun kan. Please retain your proof of purchase for warranty claims. This warranty covers defects in materials and workmanship under normal use.
Onibara Support
For technical assistance, troubleshooting, or warranty inquiries, please visit the official Gardner Bender website or contact their customer service department. You can find contact information and additional resources on their webojula: www.gardnerbender.com
