Philips Norelco Shaver 6400 (Model 1150BT/48) Instruction Manual

Ọrọ Iṣaaju

This manual provides essential instructions for the safe and effective use of your Philips Norelco Shaver 6400 (Model 1150BT/48). This electric shaver is designed for both wet and dry shaving, featuring Gyroflex 2D contouring technology and DualPrecision shaving heads for a comfortable and close shave. It also includes a click-on beard styler for versatile grooming. Please read this manual thoroughly before first use and keep it for future reference.

Alaye Aabo pataki

Always observe the following safety precautions to reduce the risk of electric shock, injury, or damage to the appliance:

• Use caution to avoid cuts or skin irritation.
• Clean and dry the shaver properly to prevent bacterial growth.
• Do not use near water or while charging the device.
• Ensure the appliance is completely dry before connecting it to power.
• Jeki ohun elo ati ṣaja kuro lati awọn aaye ti o gbona.
• Maṣe lo ohun elo ti o ba bajẹ.
• Ohun elo yii kii ṣe ipinnu fun lilo nipasẹ awọn eniyan ti o dinku ti ara, imọlara tabi awọn agbara ọpọlọ, tabi aini iriri ati imọ, ayafi ti wọn ba ti fun wọn ni abojuto tabi itọnisọna nipa lilo ohun elo nipasẹ eniyan ti o ni iduro fun aabo wọn.

Ọja Pariview

The Philips Norelco Shaver 6400 (Model 1150BT/48) consists of the following main components:

• Shaver handle
• Shaving unit with DualPrecision heads
• Tẹ-on irungbọn styler asomọ
• Fila aabo
• Iduro gbigba agbara
• Okun agbara
• Fọlẹ ninu

Aworan: Iwaju view of the Philips Norelco Shaver 6400, highlighting the three rotary DualPrecision shaving heads.

Aworan: Pada view of the Philips Norelco Shaver 6400, displaying product specifications and model number.

Image: All included accessories for the Philips Norelco Shaver 6400, laid out. These include the charging stand, power cord, click-on beard styler, protective cap, and cleaning brush.

Ṣeto

Ngba agbara si Shaver

1. Insert the small plug of the power cord into the charging stand.
2. Gbe ohun irun naa sinu imurasilẹ gbigba agbara.
3. Plug the adapter into a wall outlet. The battery indicator will show charging status.
4. A full charge takes approximately 1 hour and provides up to 40 minutes of cordless shaving. A 3-minute quick charge provides enough power for one shave.

Attaching/Detaching Shaving Heads and Styler

• To attach a head (shaving unit or beard styler), align it with the top of the shaver handle and press it down until it clicks into place.
• To detach a head, pull it upwards from the shaver handle.

Awọn ilana Iṣiṣẹ

Shaving (Wet or Dry)

1. Rii daju pe a ti gba agbara ifa.
2. Tẹ bọtini titan/pipa lati tan ẹrọ irun ori naa.
3. For dry shaving, ensure your face is clean and dry.
4. For wet shaving, apply shaving foam or gel to your skin. The shaver is waterproof and can be used in the shower.
5. Move the shaving heads in small circular motions over your skin. Apply gentle pressure.
6. The Gyroflex 2D system will adjust to the contours of your face for optimal skin contact.
7. After shaving, press the on/off button to switch off the shaver.

Using the Click-On Beard Styler

1. Detach the shaving unit and attach the beard styler.
2. Select your desired length setting on the styler.
3. Turn on the shaver and move the styler against the direction of hair growth for an even trim.
4. For precise edging, remove the comb attachment and use the bare trimmer blade.

Itoju

Ninu awọn Shaver

Ṣiṣe mimọ nigbagbogbo ṣe idaniloju iṣẹ ti o dara julọ ati mimọ.

1. After each use, switch off the shaver and detach the shaving unit.
2. Fi omi gbígbóná fọ̀ ẹ̀rọ ìfọ́ náà dáadáa.
3. You can also open the shaving unit by pressing the release button and rinsing the inside.
4. Shake off excess water and allow the shaving unit to air dry completely before reattaching or storing.
5. Use the provided cleaning brush to remove any stubborn hair particles from the shaving heads or styler. Do not use the brush on the actual cutting blades as this can damage them.

Rirọpo Awọn ori Irun

For best results, replace the shaving heads (model RQ11) every 12 months. Worn shaving heads can reduce shaving performance and cause irritation.

1. Switch off the shaver and detach the shaving unit.
2. Open the shaving unit by pressing the release button.
3. Yọ oruka idaduro naa kuro nipa titan-ọkọ-aago.
4. Yọ awọn ori irun atijọ kuro.
5. Insert the new RQ11 shaving heads into the shaving unit.
6. Fi òrùka ìpamọ́ náà sí i padà kí o sì yí i padà sí ọwọ́ aago títí tí yóò fi ti.
7. Close the shaving unit and reattach it to the shaver handle.

Laasigbotitusita

Awọn pato

• Nọmba awoṣe: 1150BT/48
• Orisun Agbara: Agbara Batiri (Lithium-ion)
• Igbesi aye batiri: Titi di iṣẹju 40 gbigbẹ laisi okun
• Akoko gbigba agbara: Wakati 1 fun idiyele ni kikun, awọn iṣẹju 3 fun idiyele iyara
• Ori oriṣi: Rotary, Gyroflex 2D, DualPrecision
• Nọmba ti Awọn abẹfẹlẹ: 3
• Ohun elo abẹfẹlẹ: Irin ti ko njepata
• Awọn ẹya: Wet & Dry Shave, Click-on Precision Trimmer Attachment
• Awọn olori Rirọpo: RQ11
• Awọn iwọn ọja: 6.2 x 1.2 x 1.2 inches
• Ìwúwo: 1.1 iwon

Image: The Philips Norelco Shaver 6400 held in a hand, illustrating its ergonomic design and compact size for easy handling.

Atilẹyin ọja ati Support

This Philips Norelco Shaver 6400 (Model 1150BT/48) comes with a full two-year warranty from the date of purchase. This warranty covers defects in materials or workmanship under normal use.

For warranty claims, technical support, or further assistance, please refer to the contact information provided in your product packaging or visit the official Philips Norelco website. You may also call the customer service number typically found on the product or its packaging.

For replacement parts, such as shaving heads (RQ11), please ensure you purchase genuine Philips Norelco parts to maintain product performance and warranty validity.