Ọrọ Iṣaaju
This manual provides essential instructions for the proper setup, operation, and maintenance of your AKG Pro Audio HT4500 Band 7 Reference Wireless Handheld Transmitter. The HT4500 is designed for professional audio applications, offering reliable wireless transmission and high-quality sound. Please read this manual thoroughly before using the device to ensure optimal performance and longevity.
Alaye Aabo
Always observe the following safety precautions to prevent damage to the device or personal injury:
- Do not expose the transmitter to extreme temperatures, humidity, or direct sunlight.
- Yago fun sisọ silẹ tabi tẹriba ẹrọ si awọn ipa ti o lagbara.
- Use only the specified battery type (AA alkaline) and ensure correct polarity during installation.
- Má ṣe gbìyànjú láti ṣí tàbí ṣe àtúnṣe sí ẹ̀rọ náà. Tọ́ka gbogbo iṣẹ́ ìtọ́jú náà sí àwọn òṣìṣẹ́ tó mọ̀ nípa rẹ̀.
- Jeki ẹrọ naa kuro ninu omi tabi awọn olomi miiran.
Package Awọn akoonu
Jẹrisi pe gbogbo awọn ohun kan wa ninu package:
- 1 x HT4500 Handheld Transmitter
- 2 x AA batiri
- 1 x Stand Adapter
Ṣeto
1. Fifi sori batiri
- Unscrew the lower part of the transmitter body to access the battery compartment.
- Insert two (2) AA alkaline batteries, ensuring correct polarity (+/-) as indicated inside the compartment.
- Securely screw the lower part of the transmitter body back into place.
- The HT4500 provides approximately 15 hours of operation with fresh AA alkaline batteries.
2. Microphone Head Attachment
The HT4500 supports interchangeable microphone heads. To attach a microphone head:
- Align the microphone head with the top of the transmitter body.
- Gently screw the microphone head onto the transmitter until it is firmly seated. Do not overtighten.
3. Agbara lori / Paa
Locate the power button on the transmitter. Press and hold the power button for a few seconds to turn the unit on or off. The display will illuminate upon power-on.
4. Synchronization with Receiver
For wireless operation, the HT4500 must be synchronized with a compatible AKG wireless receiver. Refer to your receiver's manual for detailed synchronization instructions. Generally, this involves:
- Setting the receiver to scan for available frequencies.
- Initiating the synchronization process on the transmitter (e.g., via infrared or manual frequency setting).
- Confirming successful pairing on both the transmitter and receiver displays.
Awọn ilana Iṣiṣẹ
Isẹ ipilẹ
- Pa Iṣẹ́ Dakẹ́ The transmitter features a mute switch. Activate it to temporarily silence the microphone output without powering down the unit.
- Alaye Ifihan: The integrated display shows critical information such as the selected frequency, channel, and remaining battery life in hours. This real-time display helps in managing operational time effectively.
Agbara gbigbe
The HT4500 offers up to 50mW transmission power, ensuring robust radio signal strength for long-distance applications and reliable performance in challenging RF environments. Adjusting transmission power may be possible via the transmitter's menu or in conjunction with the receiver, depending on local regulations and operational needs.
Eriali Technology
The unique dipole-antenna design of the HT4500 ensures reliable transmission even when one pole of the antenna is partially or completely covered by the user's hand, minimizing signal dropouts during performance.
Itoju
Ninu
- Fi aṣọ rírọrùn àti gbígbẹ nu òde ẹ̀rọ amúṣẹ́ náà.
- Fun idoti alagidi, die-die damp asọ le ṣee lo, atẹle nipa gbigbe lẹsẹkẹsẹ.
- Ma ṣe lo awọn afọmọ abrasive, awọn nkanmimu, tabi awọn kẹmika lile, nitori iwọnyi le ba ipari ati awọn paati inu jẹ.
- Regularly inspect the microphone grille for debris and gently clean if necessary.
Itọju Batiri ati Rirọpo
- Replace batteries promptly when the display indicates low power to avoid interruption during use.
- Remove batteries if the transmitter will not be used for an extended period to prevent leakage and damage.
- Sọ awọn batiri ti a lo ni ibamu si awọn ilana agbegbe.
Ibi ipamọ
Store the HT4500 in a cool, dry place, away from direct sunlight and extreme temperatures. Use the original packaging or a protective case to prevent physical damage.
Laasigbotitusita
| Isoro | Owun to le Fa | Ojutu |
|---|---|---|
| Ko si agbara | Awọn batiri ti o ku tabi ti ko tọ ti fi sori ẹrọ. | Rọpo awọn batiri pẹlu awọn batiri ipilẹ AA tuntun, ni idaniloju pe o tọ polarity. |
| Ko si idajade ohun | Transmitter muted; incorrect frequency/channel; receiver not powered or connected; microphone head not properly attached. | Check mute switch; ensure transmitter and receiver are on the same frequency/channel; verify receiver connections; re-attach microphone head securely. |
| Ifihan agbara igbaduro tabi idinku | Interference; excessive distance from receiver; low battery; antenna obstruction. | Change frequency/channel; reduce distance to receiver; replace batteries; ensure clear line of sight to receiver antenna. |
| Dídára ohùn tí kò dára (ariwo, ìyípadà ohùn) | Interference; gain settings incorrect; damaged microphone head. | Change frequency/channel; adjust gain settings on transmitter and receiver; try a different microphone head if available. |
Awọn pato
| Ẹya ara ẹrọ | Ẹ̀kúnrẹ́rẹ́ |
|---|---|
| Brand | AKG |
| Orukọ awoṣe | HT4500 Band7 50mW Reference Wireless Handheld Transmitter |
| Nọmba Awoṣe Nkan | 3201H00280 |
| Gbohungbo Fọọmù ifosiwewe | Gbohungbohun Nikan |
| Orisun agbara | Battery Powered (2 x AA Alkaline) |
| Igbesi aye batiri | Up to 15 hours (with AA alkaline batteries) |
| Nọmba ti awọn ikanni | 50 |
| Agbara gbigbe | Títí dé 50mW |
| Asopọmọra Technology | Ailokun |
| Asopọmọra Iru | Ailokun |
| Pataki Ẹya | Ailokun |
| Awọn ẹrọ ibaramu | Olugba oni-nọmba |
| Àwọ̀ | Dudu |
| Iwọn Nkan | 125 Giramu (4.4 iwon) |
| Package Mefa | 14 x 9.4 x 4 inches |
| UPC | 885038021636 |
| Ọjọ Akọkọ Wa | Oṣu Kẹrin Ọjọ 4, Ọdun 2013 |
Alaye atilẹyin ọja
AKG products are manufactured to high-quality standards and are covered by a limited warranty against defects in materials and workmanship. The specific terms and duration of your warranty may vary by region and product. Please retain your proof of purchase for warranty claims. For detailed warranty information, refer to the official AKG webojula tabi kan si atilẹyin alabara.
Atilẹyin
Should you encounter any issues not covered in this manual or require further assistance, please contact AKG customer support.
- Atilẹyin Ayelujara: Visit the official AKG webaaye fun awọn FAQ, iforukọsilẹ ọja, ati awọn orisun atilẹyin.
- Ibi iwifunni: Refer to the AKG website for regional contact details, including phone numbers and email addresses.
