Ọrọ Iṣaaju
This manual provides detailed instructions for the setup, operation, maintenance, and troubleshooting of your Perixx MX-2000B Programmable Laser Gaming Mouse. Please read this guide thoroughly to ensure optimal performance and longevity of your device.
The Perixx MX-2000B is a high-performance laser gaming mouse designed for precision and customization. It features an Avago 5600DPI ADNS-9500 laser sensor, 11 programmable buttons, adjustable weight, and RGB backlight options, all housed in an ergonomic, right-handed design with a durable rubberized surface.
Package Awọn akoonu
- Perixx MX-2000B Gaming Mouse
- Weight Adjustment Cartridge (with weights)
- Replacement Glide Pads
- Afowoyi Olumulo (iwe-ipamọ yii)
System Awọn ibeere
- IBM PC or Compatible System
- Operating System: Windows 2000, ME, XP, Vista, 7, 8, 10
- USB Port to wa
Ṣeto
1. Nsopọ awọn Asin
- Wa ibudo USB ti o wa lori kọnputa rẹ.
- Plug the USB connector of the Perixx MX-2000B mouse into the USB port.
- The mouse is Plug and Play, and your operating system should automatically detect and install the necessary basic drivers.
2. Driver and Software Installation (Optional for Advanced Customization)
For full customization of buttons, DPI settings, and RGB backlighting, it is recommended to install the Perixx DX-2000 driver software.
- Visit the official Perixx website to download the latest DX-2000 driver software for your operating system.
- Ṣiṣe awọn insitola ki o si tẹle awọn ilana loju iboju.
- Pataki: Some users have reported that restarting your computer twice after installation may be necessary for the software to function correctly.
3. Adjusting Mouse Weight
The MX-2000B features a weight adjustment cartridge located on the underside of the mouse, allowing you to customize its feel.
Image: Underside of the mouse with the weight compartment open, revealing six cylindrical weights. This allows users to fine-tune the mouse's weight for personalized comfort and control.
- Carefully open the weight compartment cover on the bottom of the mouse.
- Add or remove the small weights (typically 5 grams each) to achieve your preferred mouse weight.
- Pa ideri iyẹwu naa ni aabo.
Awọn ilana Iṣiṣẹ
1. DPI Atunṣe
The mouse features an Avago 5600DPI ADNS-9500 laser sensor, offering precise tracking. You can adjust the DPI (Dots Per Inch) sensitivity on-the-fly using the dedicated DPI buttons located near the scroll wheel.
Aworan: Apa view of the Perixx MX-2000B mouse, highlighting the DPI adjustment buttons located above and below the scroll wheel. These buttons allow for quick sensitivity changes during use.
- Tẹ awọn DPI+ bọtini lati mu ifamọ pọ si.
- Tẹ awọn DPI- bọ́tìnì láti dín ìfàmọ́ra kù.
- Default DPI settings typically include 500, 1000, 1500, 2000, 3000, 4000, and 5000 DPI. These can be customized via the software.
2. Awọn bọtini eto
The MX-2000B is equipped with 11 programmable buttons, allowing for extensive customization to suit your gaming or work style. These buttons can be individually programmed using the Perixx DX-2000 software.
Image: A diagram illustrating the 11 programmable buttons on the Perixx MX-2000B mouse, including the left/right click, scroll wheel, DPI buttons, and side buttons. This visual guide helps users identify each customizable input.
- Launch the Perixx DX-2000 software.
- Select the button you wish to program from the software interface.
- Assign functions such as media controls, office shortcuts, macros, or specific game commands.
- The mouse supports up to 5 programmable user profiles, which can be switched on-the-fly.
3. RGB Backlight isọdi
The mouse features 24 programmable flashing RGB backlight options, allowing you to personalize its appearance.
Image: The Perixx MX-2000B mouse illuminated with a red RGB backlight, showcasing the customizable lighting feature. The Perixx logo and a strip on the side glow with the chosen color.
- Open the Perixx DX-2000 software.
- Navigate to the lighting settings.
- Choose from various colors and flashing patterns.
- You can also disable the lighting if preferred.
Itoju
1. Ninu rẹ Asin
Regular cleaning helps maintain the performance and appearance of your mouse, especially the rubberized surfaces.
- Lo asọ, die-die damp cloth to wipe down the mouse surface.
- For stubborn grime, a small amount of mild soap solution can be used, ensuring no liquid enters the mouse's internal components.
- Pay attention to the rubber grips and crevices where dirt and oils can accumulate.
- Ensure the mouse is completely dry before use.
2. USB Itọju
The MX-2000B features a durable braided-fiber cable. Proper care will prevent damage.
- Yẹra fún àwọn ìtẹ̀sí tàbí ìtẹ̀sí tó mú kí ó dì mọ́ okùn náà.
- Do not pull the cable forcefully when disconnecting the mouse; always grasp the USB connector.
- Keep the cable free from entanglement with other peripherals.
3. Glide Pads
The mouse comes with high-quality Teflon glide pads for smooth movement. Replacement glide pads are often included with the product.
- If the mouse's gliding performance diminishes, inspect the glide pads for wear or damage.
- Carefully peel off worn pads and replace them with new ones, ensuring the surface is clean before application.
Laasigbotitusita
Asin Ko fesi
- Ṣayẹwo Asopọ USB: Rii daju pe okun USB ti wa ni edidi ni aabo sinu ibudo USB ti n ṣiṣẹ lori kọnputa rẹ. Gbiyanju ibudo USB ti o yatọ.
- Re-plug Cycle: If the mouse becomes unresponsive during use, try unplugging the USB cable, then plugging it back in. If it still doesn't work, repeat the unplug/replug cycle once or twice more.
- Tun Kọmputa bẹrẹ: Eto tun bẹrẹ le yanju awọn ọran asopọ nigbagbogbo.
- Idanwo lori Kọmputa miiran: If possible, test the mouse on another computer to determine if the issue is with the mouse or your system.
Software Issues / Customization Not Applying
- Fifi sori Awakọ: Ensure the Perixx DX-2000 driver software is correctly installed.
- Restart After Installation: If you just installed the software, perform two computer restarts as recommended by some users to ensure proper initialization.
- Awọn imudojuiwọn sọfitiwia: Check the official Perixx website for any updated drivers or software versions.
- Fi Eto pamọ: Ensure you have saved your customized settings within the software after making changes.
LED Light Bleeding / DPI Button Issues
- These are rare occurrences. If you experience minor light bleeding or a DPI button that doesn't click correctly, ensure the mouse is clean and free of debris.
- If issues persist and affect functionality, contact Perixx customer support for assistance.
Awọn pato
| Ẹya ara ẹrọ | Ẹ̀kúnrẹ́rẹ́ |
|---|---|
| Nọmba awoṣe | 11019 |
| Sensọ Iru | Avago 5600DPI ADNS-9500 Laser |
| Iwọn DPI | 500 - 5000 DPI (Atunṣe) |
| Iyara Ipasẹ | 150 ips (inches per second) |
| Isare | 30G |
| Awọn bọtini eto | 11 |
| Olumulo Profiles | 5 |
| Imọlẹ ẹhin | 24 Programmable Flashing RGB Options |
| Asopọmọra | USB (Gold-plated connector) |
| USB Ipari | 1.5 meter braided-fiber cable |
| Switch Life Cycle | 10,000,000 Igba |
| Awọn iwọn (L x W x H) | 125 x 85 x 41mm (4.92 x 3.35 x 1.61 inches) |
| Iwọn Nkan | 9.1 ounces (281g) - adjustable with weights |
| Awọn ọna ṣiṣe | Windows 2000, ME, XP, Vista, 7, 8, 10 |
| Awọn iwe-ẹri | CE, FCC, RoHS Standard |
Atilẹyin ọja ati Support
Alaye atilẹyin ọja
Perixx products are designed for durability and performance. For specific warranty terms and conditions, please refer to the warranty card included with your product or visit the official Perixx webojula.
Onibara Support
If you encounter any issues or have questions regarding your Perixx MX-2000B mouse, please contact Perixx customer support. You can find contact information and additional resources, including driver downloads and FAQs, on the official Perixx webojula:
