1. Ifihan ati Loriview
The Gardner Bender B343S is a robust hydraulic one-shot bender designed for efficiently bending 1 1/4 to 4 inch rigid steel and rigid aluminum conduit. This manual provides essential information for the safe and effective setup, operation, and maintenance of your B343S bender.
Image of the Gardner Bender B343S Hydraulic One-Shot Bender, a robust tool designed for bending rigid conduit.
2. Alaye Aabo
Always prioritize safety when operating any heavy-duty equipment. Failure to follow these safety guidelines can result in serious injury or property damage.
- Ka iwe afọwọkọ naa: Thoroughly read and understand all instructions and warnings in this manual before operating the bender.
- Ohun elo Idaabobo Ti ara ẹni (PPE): Always wear appropriate PPE, including safety glasses, gloves, and steel-toe boots.
- Agbegbe Iṣẹ: Ensure your work area is clean, well-lit, and free from obstructions. Keep bystanders away from the operating area.
- Orisun Agbara: If using an external hydraulic pump (not included with B343S), ensure it is properly grounded and connected to a suitable power source. Disconnect power before performing any maintenance or adjustments.
- Iṣẹ iṣẹ to ni aabo: Always ensure the conduit is properly secured in the bender before initiating a bend.
- Ṣayẹwo Ohun elo: Before each use, inspect the bender for any signs of damage, wear, or loose components. Do not operate damaged equipment.
- Omi Hydraulic: Handle hydraulic fluid with care. Refer to the pump manufacturer's instructions for safe handling and disposal.
3. Awọn ẹya Ọja
The Gardner Bender B343S Hydraulic One-Shot Bender offers several key features designed for efficiency and ease of use:
- Bends 1 1/4 to 4 inch rigid steel and rigid aluminum conduit.
- Eject-O-Matic feature retains conduit with a T-pin while the bending shoe is hydraulically retracted.
- Once the bend is complete, the conduit automatically pops free, saving time.
- Optional 5-inch conversion kit (B350) is available for segment bending (segment only).
4. Eto
Follow these steps to set up your Gardner Bender B343S bender for operation:
- Yọ awọn ohun elo kuro: Fi ìṣọ́ra yọ gbogbo àwọn èròjà kúrò nínú àpótí náà. Rí i dájú pé gbogbo àwọn èròjà náà wà níbẹ̀ tí wọn kò sì bàjẹ́.
- Assemble Bender: Refer to the assembly diagrams (if provided with your unit) to connect the main bender frame, bending shoe, and any other necessary components. The included screwdriver may be required for this step.
- Connect Hydraulic Pump (Sold Separately): The B343S is supplied without a pump. Connect your compatible hydraulic pump to the bender's hydraulic cylinder according to the pump manufacturer's instructions. Ensure all connections are secure and leak-free.
- Position Bender: Place the bender on a stable, level surface capable of supporting its weight (approximately 364 pounds) and the forces generated during bending.
- Select Bending Shoe: Choose the appropriate bending shoe for the size of conduit you intend to bend. Install it securely onto the bender.
5. Isẹ
Once the bender is set up, follow these steps for safe and effective conduit bending:
- Mark Conduit: Accurately mark the conduit at the desired bend point.
- Load Conduit: Carefully place the conduit into the bending shoe, aligning the mark with the bender's reference point. Ensure the conduit is seated firmly.
- Engage Eject-O-Matic: If using the Eject-O-Matic feature, ensure the T-pin is correctly engaged to retain the conduit.
- Initiate Bend: Activate the hydraulic pump to extend the cylinder and begin the bending process. Monitor the bend angle closely.
- Stop Bend: Once the desired bend angle is achieved, release the hydraulic pressure.
- Retract Cylinder: Retract the hydraulic cylinder. The Eject-O-Matic feature will automatically release the conduit as the shoe retracts.
- Remove Conduit: Carefully remove the bent conduit from the bender.
- Tun: For multiple bends, repeat the process, ensuring proper alignment and safety for each bend.
6. Itọju
Regular maintenance ensures the longevity and optimal performance of your Gardner Bender B343S bender.
- Ninu: After each use, clean the bender to remove any dirt, debris, or metal shavings. Use a dry cloth or soft brush.
- Ayewo: Periodically inspect all moving parts, hydraulic connections, and structural components for wear, damage, or corrosion. Replace any worn or damaged parts immediately.
- Eto eefun: Check hydraulic fluid levels and condition regularly according to your pump's manual. Replace fluid as recommended. Inspect hoses and fittings for leaks.
- Lubrication: Apply a light coat of appropriate lubricant to pivot points and sliding surfaces as needed to ensure smooth operation.
- Ibi ipamọ: Store the bender in a clean, dry environment when not in use.
7. Laasigbotitusita
Abala yii n ṣalaye awọn ọran ti o wọpọ ti o le ba pade lakoko iṣẹ.
| Isoro | Owun to le Fa | Ojutu |
|---|---|---|
| Bender not bending conduit | Insufficient hydraulic pressure; incorrect shoe size; conduit not seated properly. | Check hydraulic pump operation and fluid level; ensure correct bending shoe is installed; verify conduit is fully seated. |
| Conduit slipping during bend | Eject-O-Matic T-pin not engaged; worn bending shoe; conduit surface is oily. | Ensure T-pin is engaged; inspect and replace worn bending shoe; clean conduit surface. |
| Hydraulic fluid leak | Loose fittings; damaged hose or seal. | Tighten all hydraulic fittings; inspect hoses and seals for damage and replace if necessary. |
| Bender operates slowly | Low hydraulic fluid; air in hydraulic system; pump malfunction. | Check and refill hydraulic fluid; bleed air from the system (refer to pump manual); consult pump manufacturer for service. |
8. Awọn pato
Key specifications for the Gardner Bender B343S Hydraulic One-Shot Bender:
- Awoṣe: B343S
- Agbara atunse: 1 1/4 to 4 inch rigid steel and rigid aluminum conduit
- Ìwọ̀n Nkan: Isunmọ 364 poun (165 kg)
- Ohun elo: Aluminiomu
- Orisun Agbara: Requires external Corded Electric Hydraulic Pump (not included)
- Awọn eroja to wa: Screwdriver
- UPC: 032076152581
9. Atilẹyin ọja ati Support
For information regarding product warranty, technical support, or replacement parts for your Gardner Bender B343S Hydraulic One-Shot Bender, please contact Gardner Bender customer service directly or visit their official webAaye ayelujara. Jeki iwe-ẹri rira rẹ ati nọmba tẹlentẹle ọja rẹ wa ni ọwọ fun iṣẹ ti o yara ju.
Gardner Bender Official Webojula: Visit the Gardner Bender Store on Amazon
