Ọrọ Iṣaaju
The AKG C519 M is a professional miniature condenser microphone designed for brass and woodwind instruments. Its clip-on design allows for secure attachment to instruments such as trumpets, saxophones, trombones, and tubas. Featuring a cardioid polar pattern and a switchable bass cut, this microphone delivers clear and natural sound reproduction, making it suitable for both live performances and studio recording environments.
Ọja Pariview
Figure 1: AKG C519 M Professional Miniature Clip-On Condenser Microphone. This image shows the microphone with its clip and gooseneck, ready for attachment to an instrument.
Awọn ẹya pataki:
- Àpẹẹrẹ Polar Cardioid: Allows for effective operation near stage monitors by reducing sound pickup from the sides and rear.
- Integrated Transducer Shock Mount: Minimizes mechanical noise and vibrations transmitted through the instrument.
- Rubberized Mounting Clip: Ensures a firm yet gentle fit on a variety of instruments, preventing damage.
- Rugged Gooseneck: Provides stable and precise positioning of the microphone for optimal sound capture.
- Detachable Microphone Cable: Facilitates easy installation, replacement, and servicing.
- Ge Bass Yipada: An integrated feature on the MPAV for adjusting the microphone's frequency response to reduce low-frequency rumble or proximity effect.
Kini o wa ninu apoti:
- C519 Gbohungbo
- W44 Windscreen
- Microphone Bag
- Mini XLR to Mini XLR Cable (1.5m/5ft)
Awọn ilana iṣeto
- So Gbohungbohun naa: Gently open the rubberized mounting clip and secure it to the bell of your instrument. Ensure the microphone is positioned to capture the desired sound without obstructing your playing.
- Gbe Gooseneck naa si: Adjust the flexible gooseneck to place the microphone capsule optimally relative to the instrument's sound source. Experiment with distance and angle to achieve the best sound.
- So okun pọ:
- Connect the Mini XLR end of the provided cable to the microphone.
- The other end of the cable is also Mini XLR, typically used for connecting to compatible AKG wireless body-pack transmitters (e.g., PT40/45/450/470). If connecting to a standard mixer or audio interface with XLR inputs, an appropriate Mini XLR to standard XLR adapter cable (not included) will be required.
- Apply Phantom Power: The AKG C519 M is a condenser microphone and requires 48V phantom power to operate. Ensure your mixer or audio interface provides phantom power to the connected input channel. Failure to supply phantom power will result in no sound output.
- Install Windscreen: Place the W44 windscreen over the microphone capsule to reduce plosives and wind noise, especially in live or outdoor settings.
Awọn ilana Iṣiṣẹ
- Gba Staging: Set the input gain on your mixer or audio interface to an appropriate level. Start with the gain low and gradually increase it while playing your instrument until a strong signal is achieved without clipping (distortion).
- Bass Cut Switch: The C519 M features a switchable bass cut filter. If you experience excessive low-frequency rumble, feedback, or proximity effect (an increase in bass response when the microphone is very close to the sound source), engage the bass cut switch to attenuate these frequencies.
- Atẹle Ibi: Due to its cardioid polar pattern, the C519 M is designed to reject sound from the rear. Position stage monitors directly behind the microphone to minimize feedback.
- Iṣakoso USB: Secure the microphone cable to prevent accidental disconnections or interference with your performance.
Itoju
- Ninu: Use a soft, dry cloth to clean the microphone body and gooseneck. Do not use liquid cleaners or solvents, as these can damage the microphone's components.
- Itọju Afẹfẹ: The W44 windscreen can be gently hand-washed with mild soap and water if it becomes dirty. Ensure it is completely dry before reattaching it to the microphone.
- Ibi ipamọ: When not in use, store the microphone in its provided microphone bag to protect it from dust, moisture, and physical damage. Avoid storing it in extreme temperatures or high humidity.
- Ayẹwo USB: Regularly inspect the microphone cable for any signs of wear, fraying, or damage. Replace damaged cables promptly to ensure optimal performance and prevent electrical hazards.
Laasigbotitusita
| Isoro | Owun to le Fa | Ojutu |
|---|---|---|
| Ko si ohun jade |
|
|
| Ohun ti o daru |
|
|
| Excessive low-frequency noise or rumble |
|
|
| Esi |
|
|
Awọn pato
| Ẹya ara ẹrọ | Ẹ̀kúnrẹ́rẹ́ |
|---|---|
| Orukọ awoṣe | C519 M |
| Nọmba Awoṣe Nkan | 3065X00010 |
| Brand | AKG |
| Gbohungbo Fọọmù ifosiwewe | Microphone only (Clip-On) |
| Pola Àpẹẹrẹ | Alaiṣedeede (Cardioid) |
| Asopọmọra Technology | Ti firanṣẹ |
| Microphone Output Connector | Mini XLR (requires Mini XLR to XLR adapter for standard wired connections) |
| Idahun Igbohunsafẹfẹ | 20 Hz - 20 kHz (with switchable bass cut) |
| Ipalara | 200 ohms |
| Ifihan Ibuwọlu-si-Noise | 78 dB |
| Orisun agbara | Corded Electric (Requires 48V Phantom Power) |
| Ohun elo | Irin |
| Àwọ̀ | Dudu |
| Iwọn Nkan | 1.01 Poun (iwọn 0.46 kg) |
| Awọn iwọn Ọja (L x W x H) | 7.8 x 5.5 x 2.7 inches (iwọn 19.8 x 14 x 6.9 cm) |
| Niyanju Lilo | Voice recording, video recording, instrument miking (brass, woodwind) |
Atilẹyin ọja ati Support
For warranty information and technical support, please refer to the official AKG website or contact your authorized AKG dealer. Keep your proof of purchase for warranty claims.
Ilana 65 Ikilọ: Ọja yii le ni awọn kemikali ti a mọ si Ipinle California lati fa akàn ati awọn abawọn ibimọ tabi ipalara ibisi miiran. Fun alaye diẹ sii, ṣabẹwo www.P65Warnings.ca.gov.
