Ìwé Ìtọ́sọ́nà Olùlò fún Adágún Adágún Bestway Hydrium 56574-3 Round Above Ground

1. Ifihan

This manual provides essential instructions for the safe assembly, operation, and maintenance of your Bestway Hydrium 56574-3 Round Above Ground Pool. Please read all instructions carefully before installation and retain this manual for future reference.

Alaye Aabo

• Máa ṣe àbójútó àwọn ọmọdé ní gbogbo ìgbà nínú adágún omi náà àti ní àyíká rẹ̀.
• Ensure the pool is installed on a level, stable surface.
• Má ṣe rì sínú omi tàbí kí o fò sínú adágún omi náà.
• Keep electrical components away from water.
• Follow all local regulations regarding pool installation and safety.

2. Package Awọn akoonu

Verify that all components listed below are present and undamaged before beginning assembly. If any parts are missing or damaged, do not proceed with assembly and contact Bestway customer support.

• Bestway Hydrium Round Steel Wall Pool (360 x 120 cm)
• Sand Filter Pump (Flow Rate: 3,028 L/H)
• Ailewu akaba
• Aṣọ ilẹ
• Ideri adagun
• ChemConnect Dispenser
• Ilana Afowoyi (iwe yii)

Aworan 2.1: Pariview of the Bestway Hydrium pool and its main components, including the steel wall, liner, filter pump, ladder, ground cloth, and cover.

3. Igbaradi Aye

Proper site preparation is crucial for the stability and longevity of your pool. Choose a location that meets the following criteria:

• Dada Ipele: The ground must be completely flat and level. An uneven surface can cause the pool to collapse or deform.
• Ko Agbegbe kuro: Ensure there is sufficient space around the pool for safe access, maintenance, and to accommodate the filter pump and ladder.
• Firm Ground: The surface must be firm enough to support the weight of the filled pool (approximately 10,990 kg). Avoid soft soil, sand, or loose gravel.
• Sisan omi: Choose an area with good drainage to prevent water accumulation around the pool base.
• Proximity to Utilities: Consider proximity to a power source for the filter pump and a water source for filling.
• Idilọwọ-ọfẹ: Remove any sharp objects, rocks, roots, or debris from the installation area.

Aworan 3.1: The product packaging illustrates the pool dimensions and provides a visual guide to the initial setup steps, emphasizing the importance of a level surface.

4. Eto ati Apejọ

Assembly typically requires 2-3 people and can take approximately 3-4 hours. Follow these steps carefully:

1. Lay Ground Cloth: Spread the ground cloth evenly on the prepared, level surface.
2. Assemble Bottom Rails: Connect the bottom rails according to the instructions provided in the separate assembly guide for the steel wall. Ensure they form a perfect circle.
3. Install Steel Wall: Carefully unroll and attach the steel wall to the bottom rails. Secure it as per the manufacturer's instructions, ensuring the skimmer opening is positioned correctly.
4. Install Liner: Place the PVC liner inside the steel wall, ensuring it is centered and smooth. Do not stretch the liner.
5. Assemble Top Rails: Attach the top rails to the steel wall, securing the liner in place.
6. Connect Filter Pump: Follow the separate instructions for assembling and connecting the sand filter pump to the pool's inlet and outlet fittings.
7. Assemble Safety Ladder: Assemble the safety ladder according to its dedicated instructions. Place it securely at the pool's edge.
8. Install ChemConnect Dispenser: Attach the ChemConnect dispenser as instructed.

Note: Refer to the detailed diagrams in the separate assembly manual for specific component identification and connection points.

5. Operating the Pool

Àgbáye Pool

1. Ensure all drain valves are closed.
2. Begin filling the pool with water. As the water level rises, smooth out any wrinkles in the liner from the center outwards.
3. Fill the pool to the recommended level, typically just below the skimmer opening.

Ajọ fifa Isẹ

• The sand filter pump is essential for maintaining water clarity. Operate the pump daily for several hours, depending on pool usage and water conditions.
• Refer to the sand filter pump manual for detailed operating instructions, backwashing procedures, and filter media replacement.

Water Treatment with ChemConnect

• The ChemConnect dispenser helps maintain proper chemical levels. Place appropriate chemical tablets (e.g., chlorine) into the dispenser.
• Adjust the dispenser's flow rate to control chemical release.
• Regularly test pool water chemistry (pH, chlorine, alkalinity) and adjust as needed using suitable pool chemicals.

6. Itọju

Daily/Weekly Maintenance

• Skim Debris: Use a skimmer net to remove leaves, insects, and other floating debris.
• Ṣayẹwo Kemistri Omi: Test pH and chlorine levels daily or every other day and adjust as necessary.
• Clean Skimmer Basket: Empty the skimmer basket regularly to ensure efficient water flow.
• Vacuum Pool: Use a pool vacuum to remove debris from the pool floor.

Filter Pump Maintenance

• Backwash Filter: Backwash the sand filter regularly (e.g., weekly or when pressure gauge indicates) to clean the sand. Refer to the pump manual.
• Rọpo Media Ajọ: Sand filter media typically needs replacement every 3-5 years, depending on usage.

Ṣíṣe Àkókò Òtútù (Ìpamọ́ Àkókò)

The Hydrium pool is designed for year-round use, but if you choose to winterize it:

1. Mọ Ni kikun: Clean the pool thoroughly, including the liner and all components.
2. Sisan omi: Drain the pool completely.
3. Disconnect Equipment: Disconnect the filter pump, hoses, and ladder. Store them in a dry, protected area.
4. Cover Pool: Use the provided pool cover to protect the empty pool structure from debris and elements.

7. Laasigbotitusita

8. Awọn pato

• Awoṣe: Bestway Hydrium 56574-3
• Pool Dimensions (Diameter x Height): 360 cm x 120 cm (12 ft x 4 ft)
• Agbara Omi (90%): 10,990 liters (2,903 galonu)
• Ohun elo: Durable Steel Wall, UV-resistant PVC Liner
• Apẹrẹ: Yika
• Filter Pump Type: Iyanrin Filter fifa
• Filter Pump Flow Rate: 3,028 L/H (800 gal/H)
• Total Product Weight (Empty): Isunmọ 104.5 kg (230 lbs)
• Apejọ ti a beere: Bẹẹni

9. Atilẹyin ọja ati Support

Bestway products are manufactured to high-quality standards. For specific warranty information, please refer to the warranty card included with your product or visit the official Bestway website. If you encounter any issues or require assistance, please contact Bestway customer support with your model number and purchase details.

Bestway Customer Support: www.bestwaycorp.com/support