Awọn akoonu tọju
1 ARDUINO DHT11 Starter Apo
2 Awọn pato
3 LED ipamọ Ati Eto iboju
4 Palolo Buzzer Program
5 Eto sensọ otutu ati ọriniinitutu
6 Eto Gbigba Latọna jijin infurarẹẹdi
7 Photoresistor Ati Bọtini Eto
8 FAQ
9 Awọn iwe aṣẹ / Awọn orisun
9.1 Awọn itọkasi

ARDUINO-LOGO

ARDUINO DHT11 Starter Apo

ARDUINO-DHT11-Starter-Kit-ọja

Awọn pato

  • Ẹ̀kọ́ 1: Eto ipamọ EEPROM
  • Ẹkọ 2: 0.96ni LED iboju Program
  • Ẹkọ 3: MPU6050 Six-Axis Gyroscope Program
  • Ẹkọ 4: Palolo Buzzer Program
  • Ẹ̀kọ́ 5: Iwọn otutu DH11 ati Eto sensọ ọriniinitutu
  • Ẹkọ 6: Eto Gbigba Latọna jijin infurarẹẹdi
  • Ẹkọ 7: Photoresistor Eto

LED ipamọ Ati Eto iboju

Ẹkọ 1:Eto Ipamọ EEPROM:

  • Tẹ Sketch ni Arduino IDE, yan Ṣakoso awọn ile-ikawe ni Fikun-ikawe, wa AT24C256_library, ki o tẹ Fi sori ẹrọ.ARDUINO-DHT11-Starter-Kit-FIG-1
  • Tẹ File ninu Arduino IDE, ki o si yan read_wirte ninu AT24C256_library lati Examples.
  • Tẹ Po si, ki o si tẹ Atẹle Atẹle ni igun apa ọtun oke ti IDE.

Ẹkọ 2: Eto iboju LED 0.96in:

  1. Tẹ Sketch ni Arduino IDE, yan Ṣakoso awọn ile-ikawe ni Fikun-ikawe, wa U8glib, yan U8glib ki o tẹ Fi sori ẹrọARDUINO-DHT11-Starter-Kit-FIG-2
  2. Tẹ File ninu Arduino IDE ko si yan FPS lati U8glib ni Eksamples.
    • Wa // U8GLIB_SSD1306_128X64 u8g (U8G_I2C_OPT_NONE | U8G_I2C_OPT_DEV_0); // I2C/TWI koodu, pa "//" uncomment, tẹ Po si ni oke apa osi igun.ARDUINO-DHT11-Starter-Kit-FIG-3

Ẹkọ 3: MPU6050 Eto Gyroscope mẹfa-Axis:

  1. Tẹ Sketch ni Arduino IDE, yan Ṣakoso awọn ile-ikawe ni Fikun-ikawe, wa Adafruit_MPU6050, ki o tẹ Fi sori ẹrọ.ARDUINO-DHT11-Starter-Kit-FIG-4
  2. Tẹ File ni Arduino IDE ki o si yan basic_readings ni Adafruit_MPU6050 ni Eksamples.
  3. Tẹ Gbigbe, tẹ Atẹle Serial ni igun apa ọtun oke ti IDE, ki o yipada lati 9600baud si 115200baud.ARDUINO-DHT11-Starter-Kit-FIG-5
  4. Nitori awọn iye ibẹrẹ ti gbogbo awọn aake ti MPU-6050 ko le jẹ deede, nigbati awọn aake X ati Acceleration ko dọgba si 0 m/^2 ati awọn aake Z ko dọgba si 9.8 m/^2, ati X, Y ati Z ti Yiyi ni ko dogba si 0rad / s, o le mu tabi din aṣiṣe iye nipasẹ awọn eto. Ṣe iye ibẹrẹ ti iṣelọpọ ni deede deede.

Palolo Buzzer Program

Ẹ̀kọ́ 4Eto Buzzer palolo:

ARDUINO-DHT11-Starter-Kit-FIG-6

Eto sensọ otutu ati ọriniinitutu

Ẹkọ 5: Iwọn otutu DH11 ati Eto sensọ ọriniinitutu:

  1. Tẹ Sketch ni Arduino IDE, yan Ṣakoso awọn ile-ikawe ni Fikun-ikawe, wa DHT11, yan DFRobot_DHT11, ki o tẹ Fi sori ẹrọ.ARDUINO-DHT11-Starter-Kit-FIG-7
  2. Tẹ File ninu Arduino IDE, ki o si yan readDHT11 ni DFRobot_DHT11 ni Eksamples.
  3. Yi #sọtumọ DHT11_PIN 10 si #define DHT11_PIN3 ki o tẹ IDE oju-iwe akọkọ ti o gbejade.ARDUINO-DHT11-Starter-Kit-FIG-8
  4. Tẹ Atẹle Serial ni igun apa ọtun oke ti IDE ki o yipada 9600baud si 115200baud. Duro nipa 1S lati gba iwọn otutu ati ọriniinitutu lọwọlọwọ.ARDUINO-DHT11-Starter-Kit-FIG-9

Eto Gbigba Latọna jijin infurarẹẹdi

Ẹkọ 6: Eto Gbigba Latọna jijin infurarẹẹdi

  1. Tẹ Sketch ni Arduino IDE, yan Ṣakoso awọn ile-ikawe ni Fikun-ikawe, wa IRremote, ki o tẹ Fi sii.ARDUINO-DHT11-Starter-Kit-FIG-10
  2. Tẹ File ni Arduino IDE ki o si yan ReceiveDemo lati IRremote ni Examples.
  3. Tẹ Gbigbe, tẹ Atẹle Serial ni igun apa ọtun oke ti IDE, ki o yipada lati 9600baud si 115200baud. Lo isakoṣo latọna jijin ti o baamu lati ṣe deede module gbigba infurarẹẹdi ki o tẹ bọtini eyikeyi. Nigbati data ti o baamu ba han, module naa yoo ṣiṣẹ ni deede.ARDUINO-DHT11-Starter-Kit-FIG-11

Photoresistor Ati Bọtini Eto

Ẹkọ 7: Eto Photoresistor:

ARDUINO-DHT11-Starter-Kit-FIG-12

Ẹkọ 8: Eto Bọtini:

ARDUINO-DHT11-Starter-Kit-FIG-13

FAQ

Ìbéèrè Nigbagbogbos

  • Q: Bawo ni MO ṣe le yanju ti eto mi ko ba ṣiṣẹ?
    • A: Ṣayẹwo awọn asopọ lati rii daju pe wọn ti ṣeto daradara. Daju pe awọn ile-ikawe ti fi sori ẹrọ ni deede ni Arduino IDE. Rii daju pe koodu ko ni aṣiṣe ati pe o baamu awọn ilana ti a pese ninu afọwọṣe.

Awọn iwe aṣẹ / Awọn orisun

ARDUINO DHT11 Starter Apo [pdf] Itọsọna olumulo
DHT11, DHT11 Starter Kit, Starter Kit, Kit

Awọn itọkasi

Fi ọrọìwòye

Adirẹsi imeeli rẹ kii yoo ṣe atẹjade. Awọn aaye ti a beere ti wa ni samisi *