ẸRỌ ANALOG ADEMA124 Jara nigbakanna Sampling
Awọn ẹya ara ẹrọ
- Fully-featured evaluation board for the ADEMA124 and ADE-MA127
- 3-phase 4-wire, 3-phase 3-wire, or 3-wire single-phase measure-ments
- Iṣakoso PC ni apapo pẹlu Analysis | Iṣakoso | Igbelewọn (ACE) eto ifihan Syeed
- Titi di 240Vrms laini oniduro didoju voltage measurement EVALUATION KIT CONTENTS
- 2 board EVAL-ADEMA127KTZ evaluation kit
- Awọn oniyipada lọwọlọwọ
ERO NILO
- PC with USB 2.0 port, recommended
- USB Micro B cable
Awọn iwe aṣẹ nilo
- ADEMA124/ADEMA127 iwe data
O lewu ga VolTAGE
Ohun elo yii ni asopọ si laini eewu voltages. Lo iṣọra to dara nigbati o ba so awọn sensọ ati voltage nyorisi. Rii daju pe eto naa wa ni pipade ni apoti aabo.
Apejuwe gbogbogbo
The EVAL-ADEMA127KTZ is a two board evaluation kit for the si-multaneously sampling 4-channel ADEMA124 and 7-channel ADE-MA127 ΣΔ ADC. The EVAL-ADEMA127KTZ evaluation board is a configured as a 3-phase meter. The kit includes current transform-ers (CTs) for A-, B-, and C-phase and neutral current measurement. The application MCU board includes the STM32H573. The kit can be interfaced with via GUI available in the ACE software envi-ronment. The ADC driver library for the ADEMA124/ADEMA127 available on GitHub can also be uploaded to the application MCU board.
Awọn alaye ni kikun lori ADEMA124/ADEMA127 wa ninu iwe data ADEMA124/ADEMA127 ti o wa lati Awọn Ẹrọ Analog, Inc. ati pe o gbọdọ ṣagbero pẹlu itọsọna olumulo yii nigba lilo igbimọ igbelewọn EVAL-ADEMA127KTZ.
Fun sikematiki lọwọlọwọ, igbimọ Circuit ti a tẹjade (PCB), ati iwe ohun elo (BOM), tọka si oju-iwe ọja EVAL-ADEMA127.
Aworan EVAL-ADEMA127KTZ Igbelewọn Board
AKIYESI HARDWARE
Awọn sensọ lọwọlọwọ
EVAL-ADEMA127KTZ jẹ apẹrẹ lati ṣiṣẹ taara pẹlu awọn CT ti o wu lọwọlọwọ ti a pese. So awọn itọsọna CT pọ si awọn bulọọki ebute P2, P3, P4, ati P5.
EVAL-ADEMA127KTZ ni awọn alatako ẹru lori-ọkọ ni iṣeto iyatọ lati gba asopọ taara pẹlu awọn CT ti o wu lọwọlọwọ. Awọn resistors ẹru le jẹ atunṣe fun oriṣiriṣi awọn sakani lọwọlọwọ.
VOLTAGE sensọ
The EVAL-ADEMA127KTZ has on-board resistor dividers to attenu-ate the incoming input voltage. Maṣe kọja laini orukọ 240Vrms si didoju voltage in the 3-phase, 4-wire (3P4W) wye configura-tion. In the 3‑wire delta configuration, when Phase B is used as the reference, do not exceed 250Vrms line-to-line voltage.
Awọn jacks ogede 4mm wa lori ọkọ lati so voltage awọn igbewọle. Lo TPI A079 tabi awọn itọsọna deede pẹlu awọn agekuru alligator lati so voltage awọn igbewọle.
POWERING THE EVAL-ADEMA127KTZ
The EVAL-ADEMA127KTZ is powered by default via USB through the P7 micro-USB port. Power is distributed through the application MCU board to the daughter board below.
The EVAL-ADEMA127KTZ may alternatively be powered via 6V to 15V supply via P1 connector. The position of the jumper on the 5V0_SELECT connector must also be adjusted.
Igbelewọn Board SOFTWARE
- The evaluation board is compatible with ACE software.
- The EVAL-ADEMA127KTZ used the CP2102N-A02 USB-to-UART bridge for communication with the Windows® PC. Download and install the CP2102N-A02 driver from the Silicon Labs webojula.
Once the Silicon Labs drivers are installed, plug in the EVAL-ADE-MA127KTZ and open Device Manager on the PC. Note the COM number assigned to the Silicon Labs CP210x USB-to-UART Bridge. The example shown in Figure 2 is assigned to COM5. - Install the ACE software from here.
- Install the Chip.ADEMA127 package from the ADC Plug-In Manag-er.
- Once installation completes, configure the EVAL-ADEMA127KTZ. From the ACE Home tab, click Add Hardware. The EVAL-ADE-MA127KTZ is configured as a serial ports. The Number field is the COM port number attained from the Windows Device Manager for the Silicon Labs CP210x USB-to-UART Bridge. The required Baudrate is 921600, the Buffer Size 64, and the Protocol is IIO, as shown in Figure 3.
Igbelewọn Board SOFTWARE
ADC SERVICE
For more details on the ADC drivers for the ADEMA124/ADE-MA127 and specific information related the applications MCU board, refer to the App MCU Board: Build and Run Instructions.
BIBẸRẸ
For instructions on getting started with both the EVAL-ADE-MA127KTZ evaluation kit and the ACE software plug-in, refer to the ADEMA127 ACE Plug-In User’s Guide.
ESD Išọra
ESD (itanna itujade) ẹrọ ifura. Awọn ẹrọ ti o gba agbara ati awọn igbimọ iyika le ṣe idasilẹ laisi wiwa. Botilẹjẹpe ọja yi ṣe ẹya itọsi tabi iyika aabo ohun-ini, ibajẹ le waye lori awọn ẹrọ ti o wa labẹ agbara giga ESD. Nitorinaa, awọn iṣọra ESD to tọ yẹ ki o mu lati yago fun ibajẹ iṣẹ tabi isonu ti iṣẹ ṣiṣe.
Ofin ofin ati ipo
Nipa lilo igbimọ igbelewọn ti a jiroro ninu rẹ (paapọ pẹlu awọn irinṣẹ eyikeyi, awọn iwe ohun elo tabi awọn ohun elo atilẹyin, “Igbimọ Iṣiro”), o ngba lati di alaa nipasẹ awọn ofin ati ipo ti a ṣeto si isalẹ (“Adehun”) ayafi ti o ba ti ra Igbimọ Igbelewọn, ninu eyiti ọran Awọn ofin ati Awọn ipo Titaja Awọn ẹrọ Analog yoo ṣe akoso. Maṣe lo Igbimọ Igbelewọn titi ti o ba ti ka ati gba Adehun naa. Lilo rẹ ti Igbimọ Igbelewọn yoo tọka si gbigba ti Adehun naa. Adehun yii jẹ nipasẹ ati laarin iwọ (“Onibara”) ati Awọn ẹrọ Analog Inc. (“ADI”), pẹlu aaye akọkọ ti iṣowo ni Ọna Analog Way, Wilmington, MA 01887-2356, AMẸRIKA Koko-ọrọ si awọn ofin ati ipo ti Adehun naa, ADI ni bayi fun alabara ni ọfẹ, lopin, ti ara ẹni, iwe-aṣẹ igba diẹ, ti kii ṣe gbigbe si laisi iyasoto lo Igbimọ Igbelewọn Fun Awọn idi Iṣiro NIKAN. Onibara loye ati gba pe Igbimọ Igbelewọn ti pese fun ẹri nikan ati idi iyasọtọ ti a tọka si loke, ati gba lati ma lo Igbimọ Igbelewọn fun idi miiran. Pẹlupẹlu, iwe-aṣẹ ti a fun ni ni kikun jẹ koko-ọrọ si awọn aropin afikun atẹle wọnyi: Onibara kii yoo (i) yalo, yalo, ṣafihan, ta, gbigbe, fi sọtọ, iwe-aṣẹ, tabi pinpin Igbimọ Igbelewọn; ati (ii) gba ẹnikẹta laaye lati wọle si Igbimọ Igbelewọn. Gẹgẹbi a ti lo ninu rẹ, ọrọ naa "Ẹgbẹ Kẹta" pẹlu eyikeyi nkan miiran yatọ si ADI, Onibara, awọn oṣiṣẹ wọn, awọn alafaramo ati awọn alamọran inu ile. Igbimọ Igbelewọn KO ta si Onibara; gbogbo awọn ẹtọ ti a ko funni ni pato ninu rẹ, pẹlu nini ti Igbimọ Igbelewọn, ni ipamọ nipasẹ ADI. ASIRI. Adehun yii ati Igbimọ Igbelewọn ni ao gba gbogbo rẹ si alaye ikọkọ ati ohun-ini ti ADI. Onibara le ma ṣe afihan tabi gbe eyikeyi apakan ti Igbimọ Igbelewọn si eyikeyi ẹgbẹ miiran fun eyikeyi idi. Lẹhin idaduro lilo Igbimọ Igbelewọn tabi ifopinsi Adehun yii, Onibara gba lati da Igbimọ Igbelewọn pada ni kiakia si ADI. ÀFIKÚN awọn ihamọ. Onibara le ma tuka, ṣajọ tabi yiyipada awọn eerun ẹlẹrọ lori Igbimọ Igbelewọn. Onibara yoo sọfun ADI ti eyikeyi awọn ibajẹ ti o ṣẹlẹ tabi eyikeyi awọn iyipada tabi awọn iyipada ti o ṣe si Igbimọ Igbelewọn, pẹlu ṣugbọn kii ṣe opin si tita tabi eyikeyi iṣẹ miiran ti o kan akoonu ohun elo ti Igbimọ Igbelewọn. Awọn iyipada si Igbimọ Igbelewọn gbọdọ wa ni ibamu pẹlu ofin to wulo, pẹlu ṣugbọn kii ṣe opin si Itọsọna RoHS. TERMINATION. ADI le fopin si Adehun yii nigbakugba lori fifun akiyesi kikọ si Onibara. Onibara gba lati pada si ADI Igbimọ Igbelewọn ni akoko yẹn.
LIMITATION OF LIABILITY. THE EVALUATION BOARD PROVIDED HEREUNDER IS PROVIDED “AS IS” AND ADI MAKES NO WARRANTIES OR REPRESENTATIONS OF ANY KIND WITH RESPECT TO IT. ADI SPECIFICALLY DISCLAIMS ANY REPRESENTATIONS, ENDORSEMENTS, GUARANTEES, OR WARRANTIES, EXPRESS OR IMPLIED, RELATED TO THE EVALUATION BOARD INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTY OF MERCHANTABILITY, TITLE, FITNESS FOR A PARTICULAR PURPOSE OR NONINFRINGEMENT OF INTELLECTUAL PROPERTY RIGHTS. IN NO EVENT WILL ADI AND ITS LICENSORS BE LIABLE FOR ANY INCIDENTAL, SPECIAL, INDIRECT, OR CONSEQUENTIAL DAMAGES RESULTING FROM CUSTOMER’S POSSESSION OR USE OF THE EVALUATION BOARD, INCLUDING BUT NOT LIMITED TO LOST PROFITS, DELAY COSTS, LABOR COSTS OR LOSS OF GOODWILL. ADI’S TOTAL LIABILITY FROM ANY AND ALL CAUSES SHALL BE LIMITED TO THE AMOUNT OF ONE HUNDRED US DOLLARS ($100.00). EXPORT. Customer agrees that it will not directly or indirectly export the Evaluation Board to another country, and that it will comply with all applicable United States federal laws and regulations relating to exports. GOVERNING LAW. This Agreement shall be governed by and construed in accordance with the substantive laws of the Commonwealth of Massachusetts (excluding conflict of law rules). Any legal action regarding this Agreement will be heard in the state or federal courts having jurisdiction in Suffolk County, Massachusetts, and Customer hereby submits to the personal jurisdiction and venue of such courts. The United Nations Convention on Contracts for the International Sale of Goods shall not apply to this Agreement and is expressly disclaimed. All Analog Devices products contained herein are subject to release and availability.
©2025 Analog Devices, Inc. Gbogbo ẹtọ wa ni ipamọ. Awọn aami-išowo ati aami-išowo ti a forukọsilẹ jẹ ohun-ini awọn oniwun wọn. Ọkan Analog Way, Wilmington, MA 01887-2356, USA
FAQ
Can the EVAL-ADEMA127KTZ be used for single-phase measurements?
Yes, the board supports 3-wire single-phase measurements.
Kini o pọju voltage ti o le wa ni won pẹlu yi igbelewọn ọkọ?
The board supports up to 240Vrms nominal line neutral voltage wiwọn.
Awọn iwe aṣẹ / Awọn orisun
 |
ẸRỌ ANALOG ADEMA124 Jara nigbakanna Sampling [pdf] Itọsọna olumulo ADEMA124 jara nigbakanna Sampling, ADEMA124 Series, nigbakanna Sampling, Sampling |