1. Ifihan
The MAONOCaster AM100 is a portable podcast production studio designed to simplify live streaming and podcasting. It integrates multiple digital audio mixing functions into one comprehensive and affordable solution, making it easy to set up and use for both beginners and experienced broadcasters.
This device delivers superb sound quality and offers intuitive control for various audio needs. It features a built-in 5000mAh battery, providing at least 6 hours of non-stop podcasting, ideal for outdoor use or during power outages.
The MAONOCaster AM100 supports up to 4 presenters simultaneously, with easy connections for two microphones and two additional audio sources (smartphones, MP3 players, musical instruments, or any audio-playing device with a 3.5mm AUX jack).
It allows you to transform your sound with various reverberant effects, including Studio, KTV, Church, Hall, Valley, and Room modes, while providing clear monitoring of microphone and mix levels. You can live stream to platforms like YouTube, Twitch, Spotify, Hitbox, BeamPro, or record directly to your preferred software.
Important Note: The MAONOCASTER series audio interface equipment does not support microphones with sensitivity lower than -48dB (e.g., SM58, MV7B, SM7B, PGA48, Q9U) and cannot be used with any USB microphones.
2. Ohun ti o wa ninu Apoti
Jọwọ ṣayẹwo awọn awọn akoonu ti rẹ package. Ti awọn ohun kan ba nsọnu tabi bajẹ, kan si alagbata rẹ.
Image: MAONOCaster AM100 Audio Mixer and included accessories.
- MAONOCaster AM100 Podcast Console
- Itọsọna olumulo
- Okun USB-C
- 3.5mm Audio Cables (x2)
3. Ọja Ipariview
The MAONOCaster AM100 features an intuitive layout for easy control of your audio. Familiarize yourself with the various controls and ports.
Image: Front panel of the MAONOCaster AM100.
Fidio: Pariview of MAONOCaster AM100 features and controls.
Awọn iṣakoso Igbimọ iwaju:
- MIC1/MIC2 GAIN: Adjusts the input sensitivity for Microphone 1 and Microphone 2.
- Awọn bọtini 48V: Activates 48V phantom power for condenser microphones connected to MIC1/MIC2.
- Awọn bọtini MUTE: Mutes the corresponding microphone or input channel.
- MONITOR Knob: Controls the volume for monitor headphones/speakers.
- PITCH Knob: Adjusts the pitch of the voice effects.
- Bọlu ipa: Controls the intensity or type of sound effects.
- Bọlu adapọ: Adjusts the overall output volume of the mixed audio.
- Sound Effect Pads: 7 customizable pads for jingles and sound effects, plus 1 Shield button.
- Voice FX Buttons: FEMALE, MALE, BABY, ROBOT, MUSIC ONLY, SIDE CHAIN for voice modulation.
- Environment Mode Buttons: STUDIO, KTV, CHURCH, HALL, VALLEY, ROOM for reverb effects.
- Electronic Music Key Control: 12-step control for musical key adjustments.
- Atọka Batiri: Ṣe afihan ipele batiri lọwọlọwọ.
Awọn Isopọ Panel Ihin:
Image: Rear panel connections including USB-C, outputs, and inputs.
- USB-C: For power and data connection to a computer.
- MONITOR SPK: Output for connecting external monitor speakers.
- POD1/POD2 OUTPUT: Outputs for connecting to streaming devices or computers.
- ÀTẸ̀LẸ̀ XT:: 3.5mm input for external audio sources.
- PHONE INPUT: 3.5mm input for connecting a smartphone.
- MIC2B INPUT: 3.5mm input for Microphone 2.
- DENOISE Switch: Toggles noise reduction on/off.
- MIC1/MIC2A INPUT: XLR/6.35mm combo jacks for microphones.
4. Awọn ilana iṣeto
Follow these steps for initial setup of your MAONOCaster AM100.
- Ngba agbara:
Connect the MAONOCaster AM100 to a power source using the provided USB-C cable. The device can also operate on its internal 5000mAh battery once charged. - Asopọ gbohungbohun:
Connect your dynamic or condenser microphones to the Iwọle MIC1 ati/tabi MIC2A INPUT (XLR/6.35mm combo jacks) on the rear panel. If using condenser microphones, press the corresponding 48V button on the front panel to supply phantom power. For Microphone 2, you can also use the MIC2B INPUT (3.5mm jack).
Image: Microphone input options (XLR, 3.5mm, 6.35mm).
- Audio Input (External Devices):
Connect external audio sources such as smartphones, MP3 players, or musical instruments to the Aux igbewọle or PHONE INPUT using 3.5mm audio cables. - Awọn isopọ Iṣjade:
- To Streaming/Recording Device: Sopọ awọn POD1 OUTPUT ati/tabi POD2 OUTPUT to your computer or smartphone for live streaming or recording.
- Monitor Speakers: Connect external monitor speakers to the MONITOR SPK jade.
- Agbekọri: So awọn agbekọri rẹ pọ si Atẹle 1 or Atẹle 2 jacks on the front panel for real-time audio monitoring.
- Iṣẹ Denoise:
Wa awọn JAKOSO switch on the rear panel. Toggle it to 'ON' to activate noise reduction for clearer audio.
Image: Denoise switch and monitor outputs.
- Computer/Smartphone Connection:
For streaming or recording with a computer or smartphone, connect the MAONOCaster AM100 via the USB-C port. Ensure your device recognizes the mixer as an audio input/output.
Image: MAONOCaster AM100 connected to various devices.
5. Awọn ilana Iṣiṣẹ
Learn how to use the various features of your MAONOCaster AM100 for optimal audio production.
- Microphone and Input Control:
Adjust the individual MIC ere knobs for Microphone 1 and Microphone 2 to achieve desired input levels. Use the IKU buttons to quickly silence any input channel. - Overall Mix Volume:
Awọn ti o tobi ADALU knob controls the master output volume of all combined audio sources. Adjust this to set the overall loudness of your podcast or stream. - Abojuto:
Lo awọn MONITOR knob to control the volume of your connected headphones or monitor speakers. This allows you to hear your mix in real-time without affecting the output to your audience. - Voice Effects (Voice FX):
Fi ọwọ kan si FEMALE, MALE, BABY, ROBOT buttons for instant voice modulation. The PITCH knob can further fine-tune these effects. Use Orin NIKAN to remove vocals from music, and EGBE PẸN for ducking effects. - Sound Effects and Jingles:
The 7 customizable sound effect pads can be loaded with your own audio clips (jingles, sound bites) using the dedicated PC application. The AABO button provides a quick way to mute all other audio for a brief moment.
Image: Customizable sound effect pads and Shield button.
Image: PC application for programming jingles.
- Environment Modes (Reverb):
Select from various environment modes like STUDIO, KTV, CHURCH, HALL, VALLEY, ROOM to add different reverberation effects to your audio. The NIPA knob can adjust the intensity of these reverbs. - Electronic Music Key Control:
Utilize the 12-step electronic music key control to adjust the musical key of your audio, enhancing vocal performance or background music.
Image: Voice beautification controls.
- Live Streaming and Recording:
Once all connections are made and levels are set, open your preferred streaming or recording software on your connected computer or smartphone. Select the MAONOCaster AM100 as your audio input and output device. You can now begin your live stream or recording session.
6. Awọn pato
Image: Technical specifications of the MAONOCaster AM100.
| Ẹka | Paramita | Iye | Awọn akọsilẹ |
|---|---|---|---|
| MIC TO MAIN OUTPUT | jèrè | 48dB | O pọju |
| THD+N | 0.07% | @ -40dBu Input, 1kHz | |
| Ifihan agbara si ipin Ariwo | 78dB | Denoise OFF | |
| Idahun igbohunsafẹfẹ | 80~15000Hz ±3dB | Denoise ON | |
| PHONE/AUX TO MAIN OUTPUT | jèrè | 0dB | MAX |
| THD+N | 0.07% | 1kHz, 0dB Input | |
| Ifihan agbara si ipin Ariwo | 85dB | 1kHz, 0dB Input | |
| Idahun igbohunsafẹfẹ | 20~20000Hz ±1dB | ||
| POD | Ipele Ijade | -20dBu | Aṣoju |
| MONITOR | Agbara to pọju | 80mW | Load=32OHM, 1kHz, THD+N=1% |
| BATIRI | Agbara | 5000mAh | Sisanwọle Live |
| Gba agbara lọwọlọwọ | 1A | Aṣoju | |
| Quiescent Lọwọlọwọ | 460mA | batiri voltage 4V, Typical | |
| DIGITAL | Sample awọn ošuwọn | 48K | |
| Ijinle bit | 16 Bit | ||
| Electronic sound ADJ | 12 igbesẹ | ||
| Pitch ADJ | 16 igbesẹ | ||
| Poka ibiti o | 50% ~ 200% | Aṣoju | |
| OHUN IFA | Pitch Preset | 4 | |
| Ṣe akanṣe | 7 | ||
| Customize Preset (1KHz) | 1 |
7. Awọn imọran olumulo
- Ibamu Gbohungbohun: Always ensure your microphone has a sensitivity higher than -48dB for optimal performance. Remember, USB microphones are not supported.
- Isakoso Igbesi aye Batiri: The built-in 5000mAh battery provides approximately 6 hours of continuous use. For longer sessions, keep the unit connected via USB-C.
- Customizing Jingles: Make full use of the PC application to easily program and manage your custom jingles and sound effects on the dedicated pads. This adds a personal touch to your broadcasts.
- Abojuto gidi-akoko: Utilize the monitor outputs and volume control to listen to your mix in real-time, ensuring your audio sounds exactly as intended before it reaches your audience.
8. Itọju
To ensure the longevity and optimal performance of your MAONOCaster AM100, follow these maintenance guidelines:
- Ninu: Use a soft, dry, and lint-free cloth to clean the surface of the device. Avoid using abrasive cleaners, solvents, or harsh chemicals, as these can damage the finish or internal components.
- Ibi ipamọ: When not in use, store the mixer in a cool, dry place away from direct sunlight, extreme temperatures, and high humidity.
- Itọju Batiri: For devices with built-in batteries, it is recommended to charge the battery regularly, even if the device is not in frequent use, to maintain battery health. Avoid completely draining the battery or leaving it uncharged for extended periods.
- Iṣakoso USB: Handle all cables with care. Avoid sharp bends or excessive pulling, which can damage the connectors or internal wiring.
9. Laasigbotitusita
If you encounter issues with your MAONOCaster AM100, refer to the following common problems and solutions:
- Ko si Ijade ohun:
- Check all audio cable connections to ensure they are securely plugged into the correct input/output ports.
- Ṣayẹwo pe awọn ADALU koko ati MONITOR knob are turned up to an audible level.
- Rii daju pe rara IKU buttons are activated for the channels you are trying to use.
- Confirm that the MAONOCaster AM100 is selected as the audio input/output device in your computer or smartphone's sound settings.
- Gbohungbohun Ko Ṣiṣẹ:
- Ensure your microphone is properly connected to either Iwọle MIC1 or MIC2A INPUT (XLR/6.35mm) or MIC2B INPUT (3.5mm).
- If using a condenser microphone, confirm that the corresponding 48V phantom power button is pressed and illuminated.
- Ṣayẹwo awọn MIC ere knob for the specific microphone to ensure it's not set too low.
- Verify that your microphone meets the sensitivity requirement (not lower than -48dB). USB microphones are not compatible.
- Ohun ti o daru:
- Din awọn MIC ere for the input channel that is distorting.
- Lower the overall ADALU volume if the distortion is present across all outputs.
- Check for damaged or faulty audio cables.
- Batiri Ko Ngba agbara:
- Ensure the USB-C cable is securely connected to both the MAONOCaster AM100 and a working power adapter or computer USB port.
- Try using a different USB-C cable or power source.
- Sound Effects Not Playing:
- Ensure the sound effect pads have been properly programmed with audio files using the MAONO PC application.
- Ṣayẹwo awọn NIPA knob to ensure it's not set to zero or an inappropriate setting.
10. Atilẹyin ọja ati Support
The MAONOCaster AM100 Audio Mixer comes with a manufacturer's warranty. For detailed information regarding warranty coverage, terms, and conditions, please refer to the official MAONO website or the warranty card included with your product. Keep your proof of purchase (receipt or invoice) as it will be required for any warranty claims.
For technical support, troubleshooting assistance beyond this manual, or service inquiries, please visit the official MAONO support page or contact your authorized retailer. They will be able to provide you with the most up-to-date information and assistance.
