YLL C01 Mini Speaker User Manual

YLL C01 Mini Speaker

Dear, thank you for choosing our product!
We kindly ask you to read and keep this product manual before use. To have a better user experience, the content summary of this manual can help you provide a reference.

Product Overview

Operation instruction

1. Power ON/OFF: Press the speaker. and hold for 2-3s to turn ON/OFF
2. LED ON/OFF: The equipment’s power automatically turns on the light. The equipment will turn off the light.
3. Play /Pause: When the device is playing, click again to continue playing. To pause, click again to continue playing.

How to use the device connection

1. Bluetooth connection
   After turning on the device, you will hear the prompt tone “Bluetooth mode”, search for “C01” through the Bluetooth of the device, and click to pair. A successful connection will be indicated by a tone “Bluetooth connect”, and disconnection will be indicated by a tone “Bluetooth disconnect”
2.  Automatic shutdown 
   The product has not been connected to the Bluetooth device After 10 minutes. Or disconnect the Bluetooth connection, and After 10 minutes, it will automatically shut down to help you Save power, with a “power off” tone.

How to Charge

1. Take out the Type-C charging cable included in the package
2. Plug the Type-C end of the cable into the machine or microphone, and the other USB end into a normal USB charging adaptor/PC Port (5V,1A-2A)
3. When the speaker is being charged, the indicator light turns red. Once it is fully charged, the indicator light will turn off.

How to use in different scenarios

1. Magnetic suction Feature: If your phone is an Apple 11-16, the speaker can be attached directly to the back of the phone.
2. If it is other models of mobile phones, you need to take out the magnetic ring from the package to achieve the adsorption function.
3. You can also stick the magnetic ring in any position to fix it, and then attach the speaker to it. The use site can be on the desk, computer desk, dining table, wall, or your door….
4. If you don’t want to secure the speaker, you can also open the package, and there is a lanyard inside to tie it, so it can be carried around, which is very convenient.
5. Attached to the back of the phone can also be a good phone holder.

Product information

• Product Name: Mini Speaker
• Model: C01
• FCC ID:2BNFO-C01A
• Supported Channels: Mono
• Output Power: 3W
• Input Current: 5V1A
• Battery Capacity: 400mAh
• Transmission Distance: 10m
• Usage Duration: 3~4h
• Product Material: Plastic
• Product Dimension: 38*58mm
• Product Weight: 62$3g
• Manufacturer: Shenzhen Xutao Electronics Co., Ltd
• Address Unit 301, Dawangshan Rainbow Residence, No.1007
• Xihuan Road, Dawangshan Community, Shajing District
• Bao’an District, ShenzhenGuangdongng, China

Package list

1. mini Speaker*1
2. Lanyard*1
3. Magnetic ring*2
4. USB cable*1
5. Userr manual*1

Service Description
If you encounter any issues with the machine, refer to the user manual. Contact us for assistance.

FCC Statement

This equipment has been tested and found to comply with the limits for a Class B digital device, under part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used according to the instructions, may causeharmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation.
If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment to an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

Caution
 Any changes or modifications to this device not explicitly approved by the manufacturer could void your authority to operate this equipment.

This device complies with part 15 of the FCC Rules.
Operation is subject to the following two conditions:

1. This device may not cause harmful interference, and
2. This device must accept any interference received, including interference that may cause undesired operation.

Portable
RF Exposure Information
The device has been evaluated to meet the general RF exposure requirement. The device can be used in portable exposurecondition without restriction.

FAQS