Yiwu A41 Portable Bluetooth Printer
Product Specifications
- Recommended Paper: Special printing paper for tattoos
- Bluetooth Connectivity
- Safety Compliance: FCC
- Minimum Distance for Mobile Device Operation: 20cm
Product Usage Instructions
Connecting the Application
After turning on the device:
- Open the APP on your mobile phone.
- Click the “Not Connected” button in the upper right corner.
- Enter the “Add Device” list.
- Click on the device to connect to Bluetooth.
- Proceed with printing.
Tips: Ensure that Bluetooth on your mobile phone is turned on and keep the device close to the phone during the connection process.
Paper Type
It is recommended to use special printing paper for tattoos to avoid environmental issues, paper jams, or inaccurate feeding. Using non-special paper may lead to skewed printing.
Safety and Precautions
FCC Caution: RF warning for Mobile device – Maintain a minimum distance of 20cm between the radiator and your body during operation to comply with FCC radiation exposure limits.
Product information
- Product name: Portable Bluetooth Printer
- Product number Ml
- Product weight 475g
- Product size265 mm*5 B mm*30 0mm
- Print type: Thermal printing
- Input voltage DC 5V/2A
- Battery capacity 2000mah{7.4V)
- Automatic shut-down 30min
- Standby time: About 30 days
- Charging timAbouttl.30H
- Continuous printing 90 sheets of tattoo printing paper
- Paper width specifications: 210mm or 218mm
- Charging port Type-C
Product structure
Product packing list
Application installation
APP download method
- Apple users: In the App Store, search for [ iPrint] to download the A.P.
- Android users: Search for [ iPrint] in each app store to download the APP.
Switch machine
- Power on: Press and hold the power button for 25 seconds until the indicator light is on.
- Shutdown: Press and hold the power button for 25 seconds until the indicator light goes out.
Paper feeding operation
Direction identification of tattoo printing paper
Put the yellow side up and the white side down into the input port of the printer neatly, and the printing paper will be sucked in automatically.
Paper jam, abnormal handling, and cleaning
As shown in the figure, press the cover opening button to open the flip cover assembly and rotate it at a certain angle.
Connect the application
After the device is turned on, open the APP, click the “Not Connected” button in the uppe『right corner, enter ente『the “Add Device” list, click the device to connect to Bluetooth, and then print.
Tips: When connecting, please make sure that the Bluetooth of the mobile phone is turned on, and the device is close to the mobile phone
Paper type
It is recommended to use special printing pape『fo『tattoos. Non-special printing paper may not be environmentally f『iendly, cause paper jams or inaccurate reading of paper feeding, and easily cause printing to be skewed.
Safety and Precautions
- Do not charge or use the printer in high temperatures, humid, id or dusty places.
- Please see the 5V 2A input to charge, you can use a mobile phone power adapter to charge.
- After printing, do not touch the print head directly to prevent overheating and scalding.
- Please insert or pull out the charging cable gently to avoid damage to the interface due to excessive force.
- Improper charging may cause print head damage.
- Unplug the charging cable in time after charging is completed
- Place the machine on a firm and stable surface to prevent the machine from slipping and being damaged.
- When not using the machine for a long time, please turn off the power to the machine.
- Prevent foreign matter from entering the machine, so as not to cause malfunction or other risks.
FCC Caution
15.19 Labelling requirements.
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:
- This device may not cause harmful interference.
- This device must accept any interference received, including interference that may cause undesired operation.
15.21 Changes or modifications warning
Any Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
15.105 Information to the user.
Note: This equipment has been tested and found to comply with the limits for a Class B digital device, under part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used according to the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment to an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
RF warning for Mobile device:
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator & your body.
Frequently Asked Questions
- When the APP adds a device, no connectable device is found?
Please check whether the device is turned on to ensure that the Bluetooth is working. - The device cannot print. What should I do?
- Confirm whether the Bluetooth of the mobile phone is turned on, and rule out the possibility of others connecting to this device.
- Check if the tattoo printer is jammed.
- Whether the print head is overheated, if it is overheated, please wait for the print head to cool down before trying to print.
- Why are all the printed pages blank with no content?
It may be caused by the incorrect installation of the printing paper. Please refer to the introduction of replacing the printing paper to reinstall it. - Why is the printed word faded?
- Please check if the device is low on battery.
- Check if the print head is full of dirt. Please wipe it gently with a cloth dampened with alcohol.
Documents / Resources
 |
Yiwu A41 Portable Bluetooth Printer [pdf] Instruction Manual 8018T, 2BOYL-8018T, 2BOYL8018T, A41 Portable Bluetooth Printer, A41, Portable Bluetooth Printer, Bluetooth Printer, Printer |