VEVOR Projector Stand Instruction Manual

הקדמה

Thank you for choosing the VEVOR Adjustable Height Projector Stand. This manual provides essential information for the safe and efficient assembly, operation, and maintenance of your new projector stand. Please read these instructions thoroughly before use and retain them for future reference.

The VEVOR projector stand features an adjustable tray and robust load capacity, securely holding both your projector and laptop. This versatile stand is suitable for various environments, enhancing presentations and making them more dynamic.

זיכערקייַט אינפֿאָרמאַציע

• Ensure all components are securely fastened before placing any equipment on the stand.
• דו זאלסט נישט יקסיד די מאַקסימום מאַסע קאַפּאַציטעט פון 8.5 קג (18.7 לבס).
• שטעלט דעם שטאַנד אויף אַ סטאַבילן, גלייכן ייבערפלאַך צו פאַרמייַדן עס צו איבערקערן.
• האַלט קינדער און חיות אַוועק פון דעם שטאַנד בעת פֿאַרזאַמלונג און אָפּעראַציע.
• Avoid sudden movements or impacts to the stand while equipment is in place.
• Regularly check for any loose parts or damage. Do not use if damaged.

פּעקל אינהאַלט

באַשטעטיקט אַז אַלע די פאלגענדע זאכן זענען אַרייַנגערעכנט אין דיין פּעקל:

• 1 x Iron Base Foot
• 1 x באַזע
• 1 x שטיצע רוט
• 2 x Extension Rods
• 1 x Telescopic Rod
• 1 x אַדאַפּטער
• קסנומקס קס קליפּס
• 1 x פּלאַסטיק טאַץ
• 1 x Foam Pad + Strap
• 1 x Ball Head Mount
• 1 x שרויפנ - ציער
• 6 x M5*10mm Flat-Head Screws
• 1 x באַניצער מאַנואַל (דאָס דאָקומענט)

אַסעמבלי אינסטרוקציעס

Follow these steps to assemble your VEVOR Projector Stand:

1. Attach the support rod to the base using the provided screws. Ensure it is firmly secured.
2. Connect the extension rods to the support rod, then attach the telescopic rod.
3. Mount the ball head to the top of the telescopic rod.
4. Attach the plastic tray to the ball head. Secure it with the adapter and clips.
5. Apply the foam pad to the tray surface and use the strap to secure your device.

אָפּעראַציע

אַדזשאַסטינג הייך

The stand's height is easily adjustable from 77 cm (30.3 inches) to 161 cm (63.4 inches). Loosen the adjustment knob on the telescopic rod, extend or retract the rod to the desired height, and then tighten the knob securely to lock it in place.

Adjusting Tray Angle and Rotation

The tray can be rotated 180 degrees and tilted to achieve the perfect viewing angle. Loosen the ball head mount to adjust the angle, then tighten to secure. The tray also features internal cable management for an organized setup.

Placing Devices

Place your projector, laptop, or other compatible devices on the tray. Use the included foam pad for cushioning and the strap to secure the device, preventing accidental slips. The stand is designed to support various devices for presentations, viewing, or reading.

וישאַלט

• Clean the stand regularly with a soft, dry cloth. Avoid abrasive cleaners or solvents.
• קאָנטראָלירט פּעריִאָדיש אַלע שרויפן און פֿאַרבינדונגען צו זיכער מאַכן אַז זיי בלייבן פֿעסט.
• Store the stand in a dry place when not in use. Its portable folding design allows for easy storage.

טראָובלעשאָאָטינג

שטאַנד איז נישט סטאַביל:

• זיכער מאַכן אַז דער שטאַנד איז געשטעלט אויף אַ גאָר גלאַטער און סטאַבילער ייבערפלאַך.
• Verify that all screws, especially those connecting the base and rods, are fully tightened.
• Check that the weight of the device on the tray does not exceed the maximum load capacity of 8.5 kg (18.7 lbs).
• Distribute the weight evenly on the tray.

Height adjustment mechanism is loose:

• Ensure the adjustment knob on the telescopic rod is fully tightened after setting the desired height.

Tray does not hold position:

• Tighten the ball head mount securely after adjusting the tray angle.

ספּעסאַפאַקיישאַנז

וואָראַנטי און שטיצן

Information regarding warranty coverage for this product is not explicitly provided. For any support inquiries, missing parts, or technical assistance, please contact VEVOR customer service through their official webפּלאַץ אָדער די זיצער ווו די פּראָדוקט איז פּערטשאַסט.

Availability of spare parts for this product is currently not specified.