DeWalt DXPMRCH6-800 6-Port Charger Instruction Manual

1. הקדמה

The DeWalt DXPMRCH6-800 is a robust 6-port charging station designed for efficient and simultaneous charging of up to six compatible DeWalt DXPMR800 or DXPMR300 two-way radios. This manual provides essential information for the safe and effective use of your charger.

וואָס איז אין די קעסטל:

• 1 x DeWalt DXPMRCH6-800 6-Port Charger Unit
• 1 x Power Adapter with 1.8m Cable

2. זיכערקייַט אינפֿאָרמאַציע

Please read and understand all safety instructions before using the charger. Failure to follow these instructions may result in electric shock, fire, or serious injury.

• מאַכט מקור: Use only the provided power adapter. Ensure the power outlet voltage פּאַסט צו די אַדאַפּטער'ס ספּעציפֿיקאַציעס.
• סוויווע: Do not expose the charger to water, rain, or excessive moisture. This product is not waterproof. Operate in a dry, indoor environment.
• ווענטילאַטיאָן: Ensure adequate ventilation around the charger. Do not cover the charger or block any ventilation openings.
• קאַמפּאַטאַבילאַטי: This charger is designed exclusively for DeWalt DXPMR800 and DXPMR300 two-way radios. Do not attempt to charge other devices.
• שעדיקן: Do not use the charger if the power cord, adapter, or charger unit is damaged. Contact customer support for assistance.
• דיסאַססעמבלי: Do not attempt to disassemble, modify, or repair the charger. This will void the warranty and may cause harm.
• קינדער: האַלטן די טשאַרדזשער אויס פון דערגרייכן פון קינדער.

3. סעטאַפּ

Follow these steps to set up your DeWalt 6-Port Charger:

1. אַנפּאַק: קערפאַלי באַזייַטיקן אַלע קאַמפּאָונאַנץ פון די פּאַקקאַגינג.
2. אָרט: Place the charger on a stable, flat, and dry surface, away from direct sunlight or heat sources. The 1.8-meter power cable allows for flexible placement.
3. פאַרבינדן מאַכט: Insert the power adapter cable into the DC input port on the back of the charger. Plug the other end of the power adapter into a standard electrical outlet.
4. מאַכט אויף: The charger is now ready for use. There is no separate power switch; it powers on automatically when connected to an outlet.

4. אַפּערייטינג ינסטרוקטיאָנס

Charging your DeWalt two-way radios is a straightforward process:

1. Insert Radios: Gently slide a compatible DeWalt DXPMR800 or DXPMR300 two-way radio into an available charging slot on the charger. Ensure the radio is seated firmly and correctly.
2. מאָניטאָר טשאַרדזשינג: Each charging port features an individual LED indicator.
• האַרט רויט געפירט: Indicates the radio is currently charging.
• האַרט גרין געפירט: Indicates the radio's battery is fully charged.
• פלאַשינג רויט געפירט: May indicate a charging error or an incompatible battery/radio. Refer to the Troubleshooting section.
3. טשאַרדזשינג צייט: The charger is designed for fast charging, capable of fully charging up to six units in approximately 5 hours. Actual charging time may vary based on battery level and condition.
4. Remove Radios: Once the LED indicator turns solid green, the radio is fully charged and can be removed from the charging slot.

5. וישאַלט

געהעריקע אויפהאלטונג גאראנטירט די לאנגעוויטי און אפטימאלע פאָרשטעלונג פון אייער טשאַרדזשער.

• רייניקונג: Disconnect the charger from the power outlet before cleaning. Use a soft, dry cloth to wipe the exterior of the charger. Do not use liquid cleaners, solvents, or abrasive materials.
• סטאָרידזש: ווען נישט אין באַנוץ, האַלט דעם טשאַרדזשער אין אַ קיל, טרוקן אָרט, אַוועק פון דירעקט זונשייַן און עקסטרעמע טעמפּעראַטורן.
• דורכקוק: Periodically inspect the power cord and charger unit for any signs of damage. If damage is found, discontinue use and contact customer support.

6. טראָובלעשאָאָטינג

אויב איר טרעפט פּראָבלעמען מיט אייער טשאַרדזשער, זעט די פאלגענדע געוויינטלעכע פּראָבלעמען און לייזונגען:

• No LED Indicator / Charger Not Powering On:
  • Ensure the power adapter is securely plugged into both the charger and a working electrical outlet.
  • Test the electrical outlet with another device to confirm it has power.
  • Check the power adapter cable for any visible damage.
• Radio Not Charging (Solid Red LED Not Appearing):
  • Ensure the radio is correctly seated in the charging slot and making proper contact with the charging terminals.
  • Verify that the radio's battery is properly installed and not fully discharged to a point where it cannot initiate charging.
  • Try a different charging slot to rule out an issue with a specific port.
• פלאַשינג רויט געפירט:
  • This typically indicates a charging error. Remove the radio, wait a few moments, and reinsert it.
  • Ensure the radio and its battery are compatible with the charger.
  • If the issue persists, the radio's battery may be faulty or at the end of its lifespan.

If these steps do not resolve the issue, please contact DeWalt customer support.

7. ספּעסאַפאַקיישאַנז

8. וואָראַנטי און שטיצן

לימיטעד לעבן וואָראַנטי:

The DeWalt DXPMRCH6-800 6-Port Charger comes with a limited lifetime warranty. This warranty covers defects in materials and workmanship under normal use. Please refer to the official DeWalt warranty policy for full terms and conditions.

קונה שטיצן:

For technical assistance, warranty claims, or further information, please visit the official DeWalt website or contact their customer service department. Keep your purchase receipt as proof of purchase for warranty services.