SCHLAGE 163604

Schlage 163604 Addison Front Entry Handleset with Accent Lever User Manual

מאָדעל: 163604

1. הקדמה

This manual provides comprehensive instructions for the installation, operation, and maintenance of your Schlage 163604 Addison Lower Half Front Entry Handleset with Accent Lever. This handleset is designed to enhance both the security and aesthetic appeal of your front door. All Schlage front entry handlesets are precision-engineered for security and ease of installation.

Schlage 163604 Addison Handleset components laid out

Image 1.1: Schlage 163604 Addison Handleset. This image displays the main components of the handleset, including the exterior handleset, interior lever, latch, and mounting hardware.

2. זיכערקייַט אינפֿאָרמאַציע

Please read all instructions carefully before installation and use. Failure to follow these instructions may result in damage to the product, property, or personal injury.

3. פּעקל אינהאַלט

באַשטעטיקן אַז אַלע קאָמפּאָנענטן זענען פאַראַן איידער איר הייבט אָן די אינסטאַלאַציע:

4. סעטאַפּ און ייַנמאָנטירונג

The Schlage 163604 handleset is designed for easy installation and can be fitted to both right-hand and left-hand door swings. Its patented adjustable bottom thru-bolt allows for vertical adjustment of 1-1/2 inches to accommodate various pre-existing door preparations.

4.1 טיר צוגרייטונג

  1. Ensure your door has the correct bore holes and backset. Refer to the included template for precise measurements.
  2. If replacing an existing handleset, remove the old hardware.

4.2 Installing the Latch

  1. Insert the latch into the edge bore hole of the door.
  2. Secure the latch with the provided screws. Ensure the latch bolt faces the correct direction for your door swing.

4.3 Installing the Exterior Handleset

  1. Position the exterior handleset assembly on the outside of the door, aligning the spindle with the latch mechanism.
  2. Feed the thru-bolt through the lower hole in the door. Adjust its position as needed using the patented adjustable feature.

4.4 Installing the Interior Lever

  1. Place the interior lever assembly on the inside of the door, aligning it with the exterior handleset and latch.
  2. Secure the interior and exterior components together using the provided screws. Tighten all screws firmly but do not overtighten.

4.5 ינסטאָלינג די סטרייק פּלאַטע

  1. Align the strike plate with the latch bolt on the door frame.
  2. Mark and chisel out the necessary area for a flush fit, if required.
  3. Secure the strike plate with the provided screws.

5. אַפּערייטינג ינסטרוקטיאָנס

To operate your Schlage Addison Handleset:

6. וישאַלט

Proper maintenance ensures the longevity and smooth operation of your handleset.

7. טראָובלעשאָאָטינג

פּראָבלעםמעגלעך סיבהלייזונג
Lever/Thumbpiece is stiff or stickyLack of lubrication, dirt buildup, misaligned componentsApply graphite lubricant to the latch mechanism. Clean the exterior. Check for proper alignment during installation.
Key does not turn smoothlyDirt in keyway, worn key, lock mechanism needs lubricationApply graphite lubricant to the keyway. Try a spare key.
Door does not latch properlyStrike plate misalignment, latch bolt obstructionAdjust the strike plate position. Ensure no debris is blocking the latch bolt.
Handleset feels looseמאַונטינג שרויפן זענען פרייַפֿעסטצוציען אַלע זיכטיקע מאַונטינג שרויפֿן.

8. ספּעסאַפאַקיישאַנז

9. וואָראַנטי און שטיצן

Schlage products are manufactured to the highest standards and are backed by a limited lifetime mechanical and finish warranty, and a 3-year electronics warranty (where applicable). For specific warranty details, product support, or to contact customer service, please visit the official Schlage webזייטל אדער זעט די גאַראַנטיע קאַרטל וואָס איז אַרייַנגערעכנט מיט אייער פּראָדוקט.

פֿאַר ווייטערדיקע הילף, ביטע באַזוכט די SCHLAGE Store.