NUX SOLIDSTUDIO

NUX Solid Studio IR & Power Amp Simulator: Instruction Manual

Brand: NUX | Model: SOLIDSTUDIO

1. הקדמה און איבערview

The NUX Solid Studio is an advanced IR (Impulse Response) & Power Amp Simulator designed to provide guitarists and sound technicians with a versatile solution for amp and cabinet simulation. It eliminates the need for cumbersome physical amp/speaker cabinets in various settings, offering ease-of-use, reliability, and exceptional audio quality.

This pedal-sized unit simulates classic amp/cabinet scenarios, including various microphones and power amp tubes. It allows for virtual mic-ing by combining different cabinet models with microphone types and fine-tuning their positions. Additionally, it features a power amp simulation that adds a warm, tube-like sound, with options to select from three distinct power tube characteristics.

2. שליסל פֿעיִקייטן

  • 8 Speaker Cabinet Simulations: Experience a range of classic cabinet sounds.
  • 8 Microphone Models: Combine with any cabinet and adjust microphone position for fine-tuning.
  • 3 מאַכט Amp Tube Simulations: Choose between EL34, 6V6, and EL84 for diverse tube-like tones.
  • מאַכט Amp קאָנטראָלס: Master, Drive, and Presence controls for detailed sound shaping.
  • ווערסאַטאַל אַוטפּוץ: STEREO Output, DI Output, and a Bypass "THRU" Output for flexible connectivity.
  • IR Capture Capability: Create custom IR files by capturing the sound of your favorite ampליפערז.

3. סעטאַפּ גייד

3.1 אַנפּאַקינג און דורכקוק

Carefully remove the NUX Solid Studio from its packaging. Inspect the unit for any signs of damage that may have occurred during shipping. Retain the packaging for future transport or storage.

3.2 מאַכט קאַנעקשאַן

Connect a 9V DC power adapter (center negative, 200mA minimum) to the DC 9V input jack on the rear panel of the Solid Studio. Ensure the power supply meets the specified requirements to prevent damage to the unit.

3.3 אַודיאָ קאַנעקשאַנז

The Solid Studio offers various input and output options:

  • אַרייַנשרייַב: Connect your guitar or the output of other effects pedals to the 1/4-inch INPUT jack.
  • Output (TS): Use the 1/4-inch OUTPUT (TS) jacks for stereo output to an ampליפיער, מיקסער אָדער אַודיאָ צובינד.
  • די אויס: The XLR DI OUT provides a balanced output for direct connection to a mixing console or recording device.
  • דורך: The 1/4-inch THRU output provides a bypass signal, useful for parallel processing or sending an unaffected signal to another device.
דערציען view of NUX Solid Studio showing input, output, thru, USB, and DC 9V connections.

Figure 1: Rear panel connections of the NUX Solid Studio.

3.4 וסב קאַנעקשאַן

The USB port is used for firmware updates and connecting to the Solid Studio editor software for advanced settings and IR management.

4. אַפּערייטינג ינסטרוקטיאָנס

The NUX Solid Studio features intuitive controls for shaping your tone. Familiarize yourself with the main controls:

Top view of NUX Solid Studio showing all control knobs and footswitches.

פיגורע 2: שפּיץ view of the NUX Solid Studio with control labels.

4.1 Footswitches and Indicators

  • CAB/MIC Footswitch: Activates or bypasses the cabinet and microphone simulation. The green LED indicates activation.
  • AMP פאָאָטסוויטש: Activates or bypasses the power amp simulation. The red LED indicates activation.

4.2 Control Knobs and Switches

  • CAB (Cabinet) Selector: A rotary switch to select one of the 8 built-in speaker cabinet simulations.
  • MIC (Microphone) Selector: A rotary switch to select one of the 8 built-in microphone models.
  • MIC Position Switch: Adjusts the virtual position of the selected microphone relative to the cabinet.
  • מאַכט Amp Tube Selector: A mini-toggle switch to choose between EL34, 6V6, and EL84 power amp tube characteristics.
  • בעל: Controls the overall output volume of the power amp סימיאַליישאַן.
  • פאָר: Adjusts the amount of gain/overdrive in the power amp סימיאַליישאַן.
  • פּרעזענץ (פּרעזענץ): Controls the high-frequency response and brightness of the power amp סימיאַליישאַן.

4.3 Getting Started with Tone Shaping

  1. Ensure all connections are secure and the unit is powered on.
  2. Start with the MASTER, DRIVE, and PRES knobs at a neutral position (e.g., 12 o'clock).
  3. Engage the CAB/MIC footswitch (green LED on). Rotate the CAB selector to choose a desired cabinet.
  4. Rotate the MIC selector to choose a microphone. Experiment with the MIC Position switch to find the sweet spot.
  5. באַטייליקן זיך אין די AMP footswitch (red LED on). Select a power amp tube type (EL34, 6V6, or EL84).
  6. Adjust the DRIVE, MASTER, and PRES controls to fine-tune your desired power amp טאָן.

Video 1: Demonstration of the NUX Solid Studio's features and sound capabilities, including cabinet, microphone, and power amp simulations. This video showcases various tonal options and control adjustments.

5. ספּעסאַפאַקיישאַנז

שטריךדעטאַל
נומער מאָדעל נומערSOLIDSTUDIO
פּונקט וואָג1.38 פונט (0.63 קילאָגראַמס)
פּעקל דימענשאַנז5.47 X 5.28 X 2.8 אינטשעס
קאַנעקטער טיפּ1/4 אינטש (6.35 מ״מ) אַודיאָ דזשעק
ייַזנוואַרג צובינד1/4-אינטש אַודיאָ
סיגנאַל פֿאָרמאַטאַנאַלאָג
מאַטעריאַל טיפּמעטאַל
מאַכט מקורקאָרדעד עלעקטריק
Voltage9 וואלטס
Ampעראַגע200 מיליamps

6. וישאַלט

To ensure the longevity and optimal performance of your NUX Solid Studio, follow these maintenance guidelines:

  • רייניקונג: Use a soft, dry cloth to clean the unit. Avoid abrasive cleaners, solvents, or waxes.
  • סטאָרידזש: האַלט דעם אַפּאַראַט אין אַ קיל, טרוקן אָרט אַוועק פון דירעקט זונשייַן, עקסטרעמע טעמפּעראַטורן און הויכער הומידיטי.
  • האַנדלינג: באַהאַנדלט דאָס אַפּאַראַט מיט פֿאָרזיכט. פֿאַרמײַדט עס צו לאָזן פֿאַלן אָדער אויסשטעלן עס צו שטאַרקע קלאַפּן.
  • מאַכט צושטעלן: Always use the correct power adapter (9V DC, center negative) to prevent electrical damage.

7. טראָובלעשאָאָטינג

If you encounter issues with your NUX Solid Studio, try the following steps:

  • קיין מאַכט: Ensure the power adapter is correctly connected and functioning. Check the power outlet.
  • קיין קול: Verify all audio cables are securely connected to the correct input and output jacks. Check the volume levels on your guitar, amplifier, and the Solid Studio. Ensure the CAB/MIC and AMP simulations are engaged if desired.
  • אַנוואָנטיד ראַש: Check for faulty cables or power supply issues. Try isolating the Solid Studio from other electronic devices to rule out interference.
  • אומגעריכטע אויפפירונג: Perform a factory reset if available (refer to the official NUX website or support for instructions). Ensure the firmware is up to date via the USB connection.

8. וואָראַנטי און שטיצן

The NUX Solid Studio comes with a manufacturer's warranty. For detailed warranty information, product registration, and technical support, please visit the official NUX webזייטל אדער קאָנטאַקט אייער לאקאלן דיסטריביאַטאָר. האַלט אייער קויף קוויטל ווי אַ באַווייַז פון קויפן פֿאַר וואָראַנטי קליימז.

For further assistance, you may also refer to the NUX brand store on Amazon: NUX Store.

פֿאַרבונדענע דאָקומענטן - SOLIDSTUDIO

Preview NUX Mini Studio IR Cabinet Simulator Pedal - Product Overview און גייד
דעטאַילעד איבערview of the NUX Mini Studio, a compact IR cabinet simulator pedal featuring 8 built-in IRs, third-party IR loading, and software editor for guitarists. Learn about its features, specifications, controls, and software integration.
Preview נוקס סאָליד סטודיאָ MKII באַנוצערס מאַנואַל
א פולשטענדיגע באַניצער-מאַנואַל פֿאַר די NUX Solid Studio MKII, מיט פרטים וועגן אירע פֿעיִקייטן, אָפּעראַציע און ספּעציפֿיקאַציעס פֿאַר גיטאַריסטן און אַודיאָ פּראָפֿעסיאָנאַלן. לערנט וועגן amp סימולאַציע, IR לאָודינג, און קאָנעקטיוויטי.
Preview NUX NSS-4 פּולס IR לאָודער און אַודיאָ צובינד באַניצער מאַנואַל
א דעטאלירטער גייד צום NUX NSS-4 Pulse, אן IR לאָודער פּעדאַל און אַודיאָ אינטערפֿייס פֿאַר עלעקטרישע גיטאַר, באַס און אַקוסטישע גיטאַר. לערנט וועגן זיינע פֿעיִקייטן, קאָנטראָלן, IR אויסוואַל, ווייכווארג אינטעגראַציע און ספּעציפֿיקאַציעס.
Preview NUX Amp אַקאַדעמי סטאָמפּ NMA-3AAP שנעל אָנהייב גייד
די גייד גיט וויכטיגע אינפארמאציע פאר די NUX Amp אַקאַדעמיע סטאָמפּ (NMA-3AAP), אַ דיגיטאַלע גיטאַרע amp מאָדעלירן און מולטי-עפעקטן פּעדאַל. לערנט וועגן זייַנע פֿעיִקייטן, קאָנטראָלן, פֿאַרבינדונגען, ספּעציפֿיקאַציעס און שנעלער אָפּעראַציע.
Preview NUX Amp אַקאַדעמיע NGS-6: גיטאַר Amp מאָדעלער און IR לאָודער באַניצער מאַנואַל
א פולשטענדיקע באַניצער מאַנואַל פֿאַר די NUX Amp אַקאַדעמיע NGS-6, דעטאַלירט זייַנע פֿעיִקייטן, קאָנטראָלן, פֿאַרבינדונגען און ספּעציפֿיקאַציעס פֿאַר גיטאַריסטן. לערנט זיך ווי אַזוי צו נוצן דעם פֿילזײַטיקן amp מאָדעלער און IR לאָודער.
Preview נוקס סאָליד סטודיאָ MKII פּרעampליפער, מאַכט Amp סימולאַטאָר און IR לאָודער באַניצער מאַנואַל
באַניצער מאַנואַל פֿאַר די NUX Solid Studio MKII, אַ ווערסאַטאַל דיגיטאַל פּרעampליפיער, מאַכט amp simulator, and Impulse Response (IR) loader. This guide details its features, controls, connections, operation, global settings, and software editor, designed for guitarists seeking high-quality tones.