פיליפּס 24675-1

Philips 24675-1 40W Fluorescent Lamp ינסטראַקשאַנז מאַנואַל

מאָדעל: 24675-1

וויכטיק סאַפעטי אינפֿאָרמאַציע

Read all instructions carefully before installing or using the Philips 24675-1 fluorescent lamp. Failure to follow these instructions may result in electric shock, fire, or other hazards.

  • ווארענונג: ריזיקע פון ​​עלעקטרישן קלאַפּ. אָפּשטעקן די מאַכט איידער אינסטאַלירן אָדער סערוויסינג.
  • פאַרזיכערן די לamp is compatible with your fixture's ballast and voltagע רעקווייערמענץ (50 וואלטס).
  • Do not use with dimmers unless specifically rated for fluorescent lamps and compatible with the ballast.
  • שעפּן לamps carefully. Avoid dropping or subjecting them to impact.
  • Dispose of fluorescent lamps according to local regulations, as they contain mercury.
  • Do not operate in wet locations or where directly exposed to water.

סעטאַפּ און ינסטאַלירונג

This section provides instructions for safely installing your Philips 24675-1 fluorescent lamp.

פארלאנגט מכשירים און מאַטעריאַלס:

  • Philips 24675-1 Fluorescent Lamp
  • Compatible fluorescent fixture
  • Stepladder (if necessary)
  • זיכערהייט הענטשקעס און אויג שוץ

ינסטאַלירונג סטעפּס:

  1. Step 1: Disconnect Power. Locate the circuit breaker or fuse box that controls the power to the light fixture. Turn off the power completely. באַשטעטיקן אַז די מאַכט איז אויסגעלאָשן מיט אַ וואָלtagE טעסטער אויב בנימצא.
  2. שריט 2: אַראָפּנעמען אַלטע Lamp (אויב אָנווענדלעך). אויב איר פאַרבייט אַן עקסיסטירנדיקע לamp, carefully twist the old fluorescent tube 90 degrees and gently pull it out of the lampholders. Dispose of the old lamp רעכט.
  3. שריט 3: אריינשטעלן נייע Lamp. Align the pins on both ends of the Philips 24675-1 fluorescent lamp with the slots in the lampholders of your fixture. Gently push the lamp אין די לampהאַלטערס ביז די פּינס זענען גאָר אַוועקגעזעצט.
  4. Step 4: Rotate Lamp. Once seated, rotate the lamp 90 degrees until it locks securely into place. Ensure both ends are firmly connected and the lamp איז סטאַביל.
  5. שריט 5: צוריקשטעלן די מאַכט. אַמאָל די לamp איז זיכער אינסטאלירט, שטעלט צוריק די עלעקטריע צום פיקסטשער פונעם קרייז ברעיקער אדער פיוז קעסטל.
  6. Step 6: Test Operation. צינד אן דעם ליכט-קנעפל צו באשטעטיגן דעם לamp ילומאַנייץ.
Image of Philips 24675-1 40W Fluorescent Lamp

Figure 1: Philips 24675-1 40W Fluorescent Lamp. This image shows the tubular shape and standard pins of the fluorescent lamp, ready for installation into a compatible fixture.

אַפּערייטינג ינסטראַקשאַנז

The Philips 24675-1 fluorescent lamp is designed for straightforward operation within a compatible fixture.

  1. מאַכט אויף / אַוועק: Use the wall switch or fixture switch to turn the lamp אויף אָדער אַוועק.
  2. וואַרעם-אַרויף צייט: פלורעסאַנט לamps may require a brief warm-up period (a few seconds) to reach full brightness, especially in colder environments.
  3. נאָרמאַל אָפּעראַציע: די לamp will provide consistent illumination once fully warmed up.

Note: Frequent switching on and off can reduce the lifespan of fluorescent lamps. For optimal longevity, avoid rapid cycling.

וישאַלט

Proper maintenance ensures optimal performance and extends the life of your Philips 24675-1 fluorescent lamp.

  • רייניקונג: Ensure power is off before cleaning. Gently wipe the lamp מיט אַ ווייכן, טרוקענעם, לינט-פֿרײַעם שטאָף. ניצט נישט פֿליסיקע רייניגער אָדער אַברייסיוו מאַטעריאַלן.
  • דורכקוק: פּעריאָדיש דורכקוקן די לamp and fixture for any signs of damage, loose connections, or discoloration. If any issues are found, disconnect power and consult a qualified electrician.
  • פאַרבייַט: פאַרבייַטן די לamp when it reaches the end of its average rated life (2000 hours) or if it begins to flicker excessively, dims significantly, or fails to illuminate.
  • באַזייַטיקונג: פלורעסאַנט לamps contain small amounts of mercury. Do not dispose of them in regular household trash. Consult your local waste management authority for proper recycling or disposal procedures.

טראָובלעשאָאָטינג

If you experience issues with your Philips 24675-1 fluorescent lamp, באַציט זיך צו די פאלגענדע געוויינטלעכע פּראָבלעמען און לייזונגען:

פּראָבלעםמעגלעך סיבהלייזונג
Lamp טוט נישט ליכט אַרויף.
  • קיין מאַכט צו ייַנאָרדענונג.
  • Lamp נישט ריכטיג געזעסן.
  • דעפעקטיווע לamp.
  • Defective ballast or fixture.
  • טשעק קרייַז צוימען / קאָריק.
  • פאַרזיכערן לamp is fully inserted and rotated 90 degrees.
  • פאַרבייַטן לamp מיט א נייעם.
  • באַראַטן זיך מיט אַ קוואַליפֿיצירטן עלעקטריקער צו דורכקוקן די פֿיקסטשור/באַלאַסט.
Lamp פליקערט אדער זשומט.
  • Lamp נענטערט זיך צום סוף פון לעבן.
  • Incorrect or failing ballast.
  • פרייַ קשר.
  • Cold ambient temperature.
  • פאַרבייַטן לamp.
  • Consult a qualified electrician to inspect/replace ballast.
  • פאַרזיכערן לamp איז זיכער געזעסן.
  • לאָזן לamp צו וואַרעמען זיך.
רידוסט ברייטנאַס.
  • Lamp נענטערט זיך צום סוף פון לעבן.
  • שטויב אדער שמוץ אויף לamp/fixture.
  • פאַרבייַטן לamp.
  • ריין לamp and fixture (ensure power is off).

פּראָדוקט ספּעסאַפאַקיישאַנז

Detailed technical specifications for the Philips 24675-1 40W Fluorescent Lamp.

  • מאָדעל נומער: 24675-1
  • סאָרט: פיליפּס
  • ליכט טיפּ: פלורעסאַנט
  • וואָסtage: 40 וואטס
  • Voltage: 50 וואלטס
  • פאָרעם: טובולאַר (ט)
  • ברייטקייט: 140 לומענס
  • קאָליר טעמפּעראַטור: 2700 קעלווין
  • קאָליר רענדערינג אינדעקס (CRI): 80
  • דורכשניטלעך לעבן: 2000 שעה
  • פּראָדוקט דימענשאַנז: 1.75 X 1.75 X 24.5 אינטשעס
  • נומער וואָג: 6.4 אונסעס
  • ספּעציפיש ניצט: Lamp

וואָראַנטי און שטיצן

For warranty information or technical support regarding your Philips 24675-1 fluorescent lamp, please refer to the official Philips webזייטל אדער קאנטאקט זייער קאסטומער סערוויס גלייך.

Note: Warranty terms and conditions may vary by region and retailer. Keep your purchase receipt for warranty claims.

פֿאַרבונדענע דאָקומענטן - 24675-1

Preview פיליפּס פלורעסענט Lamp זיכערהייט און האַנדלינג גייד
וויכטיגע זיכערהייט אינסטרוקציעס פֿאַר Philips פלורעסענט לampס, וואָס דעקן עלעקטרישע געפאַרן, ברעיקאַדזש פאָרזיכטיקייטן, און קוועקזילבער באַזייַטיקונג פּראָוסידזשערז.
Preview פיליפּס אולטינאָן פּראָ7000 SI LED פעסטאָן לאָמפּ: פֿאַרבעסערטע אינעווייניקסטע לייטינג
אַנטדעקט די Philips Ultinon Pro7000 SI LED פעסטון באַלבז (LUM11860CU70X1/20) פֿאַר אייער אויטאָ. זיי אָפֿערן העכערע העלקייט (6000 K), גלייכמעסיקע ליכט פֿאַרשפּרייטונג, און אַ 5,000-שעה לעבן, פֿאַרבעסערן די פֿאָר זיכערקייט און אינעווייניק סטיל מיט גרינג פּלאַג-און-פּליי ינסטאַלירונג.
Preview פיליפּס טרופאָרס קאָר לעד ראָוד לamp ינסטאַללאַטיאָן גייד
Official installation guide for the Philips TrueForce Core LED road lamp, providing essential information on safe installation, compatibility, and warnings. Learn how to replace traditional lamps with this energy-efficient LED solution.
Preview פיליפּס קאָרפּראָ G24q-3 LED 9.5W אינסטאַלאַציע גייד
אינסטאַלאַציע גייד פֿאַר די Philips CorePro G24q-3 LED 9.5W (26W עקוויוואַלענט) 4-פּין לאָמפּ, דעטאַלירנדיק קאָמפּאַטאַביליטי, באַניץ, און וויירינג אינסטרוקציעס פֿאַר עלעקטראָנישע באַלאַסטן און AC הויפּט עלעקטרישע נעץ.
Preview פיליפּס ל.amp ספּעציפֿיקאַציע גייד SG-100: ענערגיע שפּאָרן לייטינג סאַלושאַנז
אַנטדעקן די פיליפּס Lamp ספעציפיקאציע גייד SG-100 פאר קאמפלעטע דעטאלן וועגן גלייכבאר, פלורעסענט, און הויך-אינטענסיטעט דיסטשאַרדזש לampס. די גייד גיט וויכטיגע דאטן און ענערגיע-שפּאָרנדיקע סאַבסטיטוציע רעקאָמענדאַציעס, מיט די עקאָן-אָ-וואַט ליניע צו העלפן רעדוצירן לייטינג קאָסטן.
Preview פיליפּס קאָנסומער ל.ampקאַטאַלאָג 2015: דערלעבט אויפרעגענד ליכט
אויספאָרשן דעם פולשטענדיקן 2015 פּאָרטפאָליאָ פון Philips קאָנסומער לampס, וואָס אָפֿערט ​​כידעשדיקע לייטינג לייזונגען דיזיינד צו פֿאַרבעסערן לעבעדיקע פּלעצער. דער קאַטאַלאָג דעטאַלירט אַ ברייטע קייט פון לamps, from energy-efficient LED and fluorescent options to classic halogen and GLS bulbs, catering to diverse lighting needs and preferences.