Empire 3 Piece Standard Fireplace Frame - Matte Black

הקדמה

This instruction manual provides essential information for the proper installation, use, and maintenance of your Empire 3 Piece Standard Fireplace Frame, Model DVF36BL. Please read this manual thoroughly before beginning installation or use to ensure safe and efficient operation. Retain this manual for future reference.

וויכטיק סאַפעטי אינפֿאָרמאַציע

• Always handle components with care to avoid damage or injury.
• Ensure all parts are present and undamaged before beginning installation.
• This frame is designed for specific Empire fireplace models: 36-Inch Tahoe Direct-Vent, 36-Inch Keystone Deluxe, and 36-Inch Vail Vent-Free Fireplaces. Verify compatibility before installation.
• האַלטן קליין טיילן אַוועק פון קינדער.
• אויב איר זענט נישט זיכער וועגן קיין טייל פון די ינסטאַלירונג פּראָצעס, קאָנסולטירט אַ קוואַליפֿיצירט פאַכמאַן.

פּעקל אינהאַלט

דיין פּעקל זאָל אַנטהאַלטן די פאלגענדע זאכן:

• 3-Piece Outer Frame (Matte Black)
• Installation Hardware (if applicable, check packaging)

If any components are missing or damaged, please contact Empire customer support immediately.

סעטאַפּ און ינסטאַלירונג

This 3-piece frame is designed to provide a finished transition between your fireplace appliance and the adjoining wall or surface. Follow these general steps for installation:

1. אָפּלייגן קאַמפּאָונאַנץ: Carefully remove all frame pieces from the packaging. Inspect for any shipping damage.
2. Prepare Fireplace Opening: Ensure the fireplace unit is properly installed and secured according to its own instruction manual. The surrounding surface should be clean and free of debris.
3. Position Frame Pieces: The frame consists of three sections (top, left, and right). Carefully align each piece around the fireplace opening. The matte black finish should face outwards.
4. זיכערער ראַם: Depending on your specific fireplace model and installation, the frame pieces will either snap into place, be held by clips, or require screws. Refer to your fireplace unit's manual for specific frame attachment points and methods. Ensure the frame is flush with the fireplace and the adjoining surface.
5. באַשטעטיקן פּאַסיק: Once all pieces are in place, check that the frame is securely attached and provides a seamless transition. There should be no gaps or loose sections.

For detailed instructions on attaching the frame to your specific Empire fireplace model, please consult the installation manual provided with your fireplace unit.

באַניץ גיידליינז

The Empire 3 Piece Standard Fireplace Frame is a decorative and functional component designed to finish the appearance of your fireplace installation. Once properly installed, no further "operation" is required from the frame itself. Ensure the frame remains securely attached and is not subjected to excessive force or impact.

זאָרגן און וישאַלט

• רייניקונג: To clean the matte black finish, use a soft, damp שטאָף. פֿאַרמײַדט אַברייסיוו רייניגער, סאָלווענטן, אָדער שטרענגע כעמיקאַלן, ווײַל די קענען שאַטן די ענדיקונג.
• דורכקוק: Periodically inspect the frame for any signs of loosening or damage. If any issues are found, address them promptly to maintain safety and appearance.
• סטאָרידזש: If the frame needs to be removed and stored, ensure it is kept in a dry, protected environment to prevent scratches or damage.

טראָובלעשאָאָטינג

ספּעסאַפאַקיישאַנז

וואָראַנטי און קונה שטיצן

For information regarding warranty coverage, please refer to the documentation provided with your original fireplace unit or contact Empire customer support directly. For technical assistance or to order replacement parts, please visit the official Empire webפּלאַץ אָדער קאָנטאַקט זייער קונה סערוויס אָפּטיילונג.

Webפּלאַץ: www.empirecomfort.com (עקסampדער לינק, דער פאקטישער לינק קען זיין אנדערש)